Products in Elastomers: Styrene Butadiene Block Copolymer

Linear styrene-butadiene thermoplastic elastomer DST L 30-01 is essentially a product of styrene and butadiene block polymerization in hydrocarbon solution in the presence of alkyllithium catalyst. DST L 30-01 is dusted with calcium stearate or amorphous silica. It is containing a no staining stabilizer.

Linear styrene-butadiene thermoplastic elastomer DST L 30-01 is essentially a product of styrene and butadiene block polymerization in hydrocarbon solution in the presence of alkyllithium catalyst. DST L 30-01 is dusted with calcium stearate or amorphous silica. It is containing a no staining stabilizer.

Linear styrene-butadiene thermoplastic elastomer DST L 30-01 is essentially a product of styrene and butadiene block polymerization in hydrocarbon solution in the presence of alkyllithium catalyst. DST L 30-01 is dusted with calcium stearate or amorphous silica. It is containing a no staining stabilizer.

Emulprene 1011AH is a hot emulsion styrene-butadiene copolymer using rosin acid as emulsifier and coagulated with salt- acid. It is very light color product stabilized with a non-staining antioxidant.

Kraton D1118 K is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied from North America in the physical form identified below. Kraton D1118 KT - supplied as a dusted porous pellet Kraton D1118 KTM - supplied as a dusted powder Kraton D1118 K is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.

Emulprene 1509 is a cold styrene – butadiene copolymer, used fatty and rosin acid as emulsifier, coagulated by salt – acid system and stabilized with a non staining antioxidant.

Stereon™SR8983 is a solution polymerized linear styrene-butadiene multi-block thermoplastic elastomer. This material has been designed as a graftable rubber modifier that is reacted with bromine and processed into a clean, white powder. The brominated Stereon™SR8983 is then combined with polystyrene to produce a flame retardant foam insulation used in building and home construction.

Kraton D1192 E is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied from Europe in the physical forms described below: Kraton D1192 ET- supplied as porous pellets dusted with talc Kraton D1192 ES - supplied as porous pellets dusted with amorphous silica Kraton D1192 ESM - supplied as powder dusted with amorphous silica Kraton D1192 ETM - supplied as powder dusted with talc for the North American market Kraton D1192 ETF - supplied as fluffy crumbs dusted with talc Kraton D1192 E is used for modification of industrial and paving bitumen. It may also be suitable for use in formulating adhesives, sealants and coatings, and in the modification of polymers.

Kraton D1102 A is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 28.5% mass (AU) or 29.5%mass (AS, ASM) from Europe in the physical form(s) identified below in the grade nomenclature: D1102 AS - supplied as porous pellets dusted with silica D1102 AU - supplied as undusted porous pellets D1102 ASM - supplied as powder dusted with amorphous silica Kraton D1102 A is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton D1161 P is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied from North America in the physical form identified below. Kraton D1161 PT - supplied as a dusted dense pellet Kraton D1161 PTM - supplied as a dusted powder Kraton D1161 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.

Arlatex 1215E is an aqueous dispersion of a carboxylated styrene-butadiene copolymer manufactured by polymerization in emulsion. The type of emulsifier is anionic and it is stabilized with a non-staining antioxidant.

Emulprene 260 is a self-reinforcing emulsion rubber due to its high styrene content. The design of the elastomer allows for excellent processability during mixing and the special antioxidant used in its manufacture make it non-staining.

Arlatex 1919NC is an aqueous dispersion of a carboxylated styrene-butadiene copolymer manufactured by polymerization in emulsion. The type of emulsifier is anionic and it is stabilized with a non-staining antioxidant.

Emulprene 1502A is a styrene-butadiene copolymer, cold polymerized using fatty and rosin acid soap. Previously to the alum-acid coagulation, a non-staining stabilizer is added in the manufacturing process. The product does not contain nitrosamine promoters.

Calprene 7318 is a linear block copolymer of styrene and butadiene, having 32% styrene content, most of it forming a polystyrene block, which gives the polymer a thermoplastic behavior.It has a non-staining antioxidant system; FDA approved for use in food contact applications and is essentially gel free with a very clear color.Calprene 7318 is BHT* and nonylphenol free SBS, according to existent food contact regulations (Europe and America)Calprene 7318 is specially designed for technical compounds and adhesives.It is presented as free flowing porous crumb making easy its handling and dissolution.*(BHT content in pure polymer less than 30ppm).

Jilin Xingyun Chemical (Jilin Chemical Group) Styrene Butadiene Rubber 1500 Grade 1 is The shelf of styrene butadiene rubber is longer because of its good stability.The property of styrene butadiene rubber is similar to that of natural rubber. It will appear physical and chemical change,whlie its oxidization is slow under the effect of light,heat,oxygen and ozone.

Emulprene 1502 is a cold styrene – butadiene copolymer, used fatty and rosin acid as emulsifier, coagulated by salt-acid system and stabilized with a non-staining antioxidant.

Emulprene 1012CR is a crumb version of a high viscosity hot emulsion styrene-butadiene copolymer, polymerized using fatty acid emulsifier and coagulated with salt-acid. It is very light color product stabilized with a non-staining antioxidant, and presented as free flowing dusted crumb which eliminates the end for size reduction equipment. Between 4% and 12% of Calcium Carbonate is used as dusting agent.

Emulprene 1009LCR is a crumb hot emulsion styrene-butadiene copolymer, slightly cross-linked with divinylbenzene. It is polymerized using fatty acid as emulsifier, coagulated with salt acid and stabilized with a non-staining antioxidant. This rubber is produced as free flowing dusted crumb which eliminates the need for size reduction equipment. Between 7 – 12 % of Calcium carbonate is used as dusting agent.

Emulprene 1783 is a copolymer styrene – butadiene cold emulsion polymerized used fatty and rosin acid as emulsifier, coagulated by salt-acid system and it is extended utilizing 37.5 phr of RAE (Residual Aromatic Extract).

Emulprene 1502CR is a Styrene-Butadiene copolymer, cold polymerized using fatty acid as emulsifer, coagulated with salt-acid and stabilized with a non-staining antioxidant. This rubber is produced as free flowing dusted crumb which eliminates the need for size reduction equipment. Between 4 and 12 % of calcium carbonate is used as dusting agent.

Emulprene 1011 is a hot emulsion styrene-butadiene copolymer using rosin acid as emulsifier and coagulated with salt- acid. It is very light color product stabilized with a non-staining antioxidant.

Emulprene 1013ACR is a styrene-butadiene copolymer, hot polymerized using a fatty acid soap. Previously to the alum-acid coagulation, a non-staining stabilizer is added in the manufacturing process. This rubber is produced in free flowing crumb form which eliminates the need for milling, cutting, or grinding equipment. Between 7-12% of Calcium Carbonate is used as dusting agent.

Emulprene 1009L is hot emulsion styrene-butadiene copolymer, slightly cross-linked with divinylbenzene. It is polymerized using fatty acid as emulsifier, coagulated with salt acid and stabilized with a non-staining antioxidant.

Emulprene 1509A is a copolymer styrene–butadiene, cold emulsion polymerized using fatty and rosin acid soap, coagulated by alum-acid system and stabilized with a non staining antioxidant.

Emulprene 1006CR is a crumb hot emulsion styrene-Butadiene copolymer, polymerized using a fatty acid emulsifier and coagulated with salt-acid. It is a very light color product stabilized with a non-staining antioxidant, and presented as free flowing dusted crumb which eliminates the end for size reduction equipment. Between 7% and 12% of Calcium Carbonate is used as dusting agent.

Emulprene 1732 is a copolymer styrene-butadiene, cold emulsion polymerized used fatty acid as emulsifier, coagulated by salt – acid system and it is extended utilizing 32.5phr of naphthenic oil.

Emulprene 1013A is a styrene-butadiene copolymer, hot polymerized using a fatty acid soap. Previously to the alum-acid coagulation, a non-staining stabilizer is added in the manufacturing process.

Insagum 1028 is a hot emulsion styrene-butadiene copolymer. It is white to light yellow and free of foreign matter. It is stabilized with BHT antioxidant. Product is manufactured in accordance with Good Manufacturing Practices (GMP) and complies with U. S. FDA regulation 21CFR172.615 referenced to SBR used for Chewing Gum, 21CFR 177.2600 Indirect food additives: Polymers.It meets the requirements in the Food Chemical Codex for 50/50 type SBR.

Arlatex 1185E is an aqueous dispersion of a carboxylated styrene-butadiene copolymer manufactured by polymerization in emulsion. The type of emulsifier is anionic and it is stabilized with a non-staining antioxidant.

Developed with our unique polymerization technology, Cleapact is a type of styrene copolymer resin that excels in the balance of transparency, shock-resistance and molding capacity. Products in this category have a variety of positive characteristics and meet diverse range of user needs.

Developed with our unique polymerization technology, Cleapact is a type of styrene copolymer resin that excels in the balance of transparency, shock-resistance and molding capacity. Products in this category have a variety of positive characteristics and meet diverse range of user needs.

KIBITON® Q-Resin PB-5903 is a Styrene Butadiene Block Copolymer (SBC) product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Primary characteristic: rohs compliant.

Developed with our unique polymerization technology, Cleapact is a type of styrene copolymer resin that excels in the balance of transparency, shock-resistance and molding capacity. Products in this category have a variety of positive characteristics and meet diverse range of user needs.

Vector® 2336A styrenic block copolymer is a radial block copolymer with a narrow molecular weight distribution. It is well-suited for use as a modifier in construction applications. It is the same polymer as Vector 2336, but unlike Vector 2336, Vector 2336A does not contain the antioxidant tris(nonylphenyl) phosphite (TNPP).

Kraton D1116 A is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied from Europe in the physical form identified below. Kraton D1116 AT - supplied as a porous pellet dusted with talc Kraton D1116 ASM - supplied as a powder dusted with silica Kraton D1116 A IM - supplied as a powder dusted with inorganic dusting agents for supply to the North American market Kraton D1116 A is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.