Products in Elastomers: Styrenic Thermoplastic Elastomer

1,117 Products found in Elastomers

Browse Applications

Solplast™ TH 35A9923 C1 banner

UteksolSolplast™ TH 35A9923 C1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Extrusion
Tear Strength:18.0 - 18.0 kN/m
Strain at Break:870.0 - 870.0 %
Compression Set (70 °C):34.0 - 34.0 %

Solplast™ TH 65A9900 C2 banner

UteksolSolplast™ TH 65A9900 C2

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Extrusion
Tear Strength:22.0 - 22.0 kN/m
Strain at Break:820.0 - 820.0 %
Compression Set (70 °C):44.0 - 44.0 %

Solplast™ TH 90A9000 D banner

UteksolSolplast™ TH 90A9000 D

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:34.0 - 34.0 kN/m
Strain at Break:470.0 - 470.0 %
Compression Set (70 °C):88.0 - 88.0 %

Kebaflex® - H / SPAS 55 A.02 banner

BARLOG plastics GmbHKebaflex® - H / SPAS 55 A.02

Strain at Break:400.0 - 400.0 %

TPE-S, Shore A55, modified for good adhesion to adhesion-modified polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as e.g. GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY)

Solplast™ TH 75A9921 A2 banner

UteksolSolplast™ TH 75A9921 A2

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:26.0 - 26.0 kN/m
Strain at Break:730.0 - 730.0 %
Compression Set (70 °C):53.0 - 53.0 %

Solplast™ TH 50A9822 B1 banner

UteksolSolplast™ TH 50A9822 B1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:18.0 - 18.0 kN/m
Strain at Break:950.0 - 950.0 %
Compression Set (70 °C):28.0 - 28.0 %

Solplast™ TH 90A7012 A banner

UteksolSolplast™ TH 90A7012 A

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:40.0 - 40.0 kN/m
Strain at Break:500.0 - 500.0 %
Compression Set (70 °C):90.0 - 90.0 %

Kebaflex® - H / SPET 60F A.01 Natural banner

BARLOG plastics GmbHKebaflex® - H / SPET 60F A.01 Natural

Polymer Name:Styrenic Thermoplastic Elastomer
Strain at Break:600.0 - 600.0 %
Compression Set (70 °C):63.0 - 63.0 %

TPE-S, Shore A63, modified for adhesion to PET, food compliant according to EU 10/2011 and FDA

Solplast™ TH 35A9000 C banner

UteksolSolplast™ TH 35A9000 C

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Extrusion
Tear Strength:17.0 - 17.0 kN/m
Strain at Break:940.0 - 940.0 %
Compression Set (70 °C):31.0 - 31.0 %

Solplast™ TH 20A8900 A1 banner

UteksolSolplast™ TH 20A8900 A1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:12.0 - 12.0 kN/m
Strain at Break:720.0 - 720.0 %
Compression Set (70 °C):56.0 - 56.0 %

Solplast™ TH 50A7000 A1 banner

UteksolSolplast™ TH 50A7000 A1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:17.0 - 17.0 kN/m
Strain at Break:510.0 - 510.0 %
Compression Set (70 °C):90.0 - 90.0 %

Solplast™ TH 50A7000 A1 by Uteksol is commonly used as Molding Resin for a variety of applications.

Kebablend® / M FE 190401 TPE banner

BARLOG plastics GmbHKebablend® / M FE 190401 TPE

Strain at Break:450.0 - 450.0 %

BARLOG plastics GmbH Kebablend® / M FE 190401 TPE (black) is a development product based on TPE for the production of injection molded magnets. The material has a Shore A 82 hardness.

Solplast™ TH 85A9900 C1 banner

UteksolSolplast™ TH 85A9900 C1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Extrusion
Tear Strength:32.0 - 32.0 kN/m
Strain at Break:740.0 - 740.0 %
Compression Set (70 °C):48.0 - 48.0 %

Solplast™ TH 70A8900 A1 banner

UteksolSolplast™ TH 70A8900 A1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:23.0 - 23.0 kN/m
Strain at Break:590.0 - 590.0 %
Compression Set (70 °C):71.0 - 71.0 %

Solplast™ TH 75A7900 A banner

UteksolSolplast™ TH 75A7900 A

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:28.0 - 28.0 kN/m
Strain at Break:510.0 - 510.0 %
Compression Set (70 °C):90.0 - 90.0 %

Solplast™ TH 65A7004 B banner

UteksolSolplast™ TH 65A7004 B

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding, Extrusion
Tear Strength:29.0 - 29.0 kN/m
Strain at Break:860.0 - 860.0 %
Compression Set (70 °C):90.0 - 90.0 %

Solplast™ TH 55D9000 A0 banner

UteksolSolplast™ TH 55D9000 A0

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:110.0 - 110.0 kN/m
Strain at Break:600.0 - 600.0 %
Compression Set (70 °C):80.0 - 80.0 %

Solplast™ TH 80A9011 C1 banner

UteksolSolplast™ TH 80A9011 C1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Extrusion
Tear Strength:29.0 - 29.0 kN/m
Strain at Break:770.0 - 770.0 %
Compression Set (70 °C):43.0 - 43.0 %

Solplast™ TH 60A8900 A0 banner

UteksolSolplast™ TH 60A8900 A0

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:25.0 - 25.0 kN/m
Strain at Break:630.0 - 630.0 %
Compression Set (70 °C):53.0 - 53.0 %

Solplast™ TH 40A9900 A banner

UteksolSolplast™ TH 40A9900 A

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:17.0 - 17.0 kN/m
Strain at Break:940.0 - 940.0 %
Compression Set (70 °C):29.0 - 29.0 %

Solplast™ TH 40A9900 A by Uteksol is commonly used as Molding Resin for a variety of applications.

Solplast™ TH 65A9911 A1 banner

UteksolSolplast™ TH 65A9911 A1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:25.0 - 25.0 kN/m
Strain at Break:790.0 - 790.0 %
Compression Set (70 °C):55.0 - 55.0 %

Solplast™ TH 40A9024 B banner

UteksolSolplast™ TH 40A9024 B

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:12.0 - 12.0 kN/m
Strain at Break:900.0 - 900.0 %
Compression Set (70 °C):88.0 - 88.0 %

Solplast™ TH 30A9000 A2 banner

UteksolSolplast™ TH 30A9000 A2

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:13.0 - 13.0 kN/m
Strain at Break:920.0 - 920.0 %
Compression Set (70 °C):28.0 - 28.0 %

Solplast™ TH 30A9000 A2 by Uteksol is commonly used as Molding Resin for a variety of applications.

Solplast™ TH 60A9203 B1 banner

UteksolSolplast™ TH 60A9203 B1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:23.0 - 23.0 kN/m
Strain at Break:830.0 - 830.0 %
Compression Set (70 °C):32.0 - 32.0 %

Solplast™ TH 45A9010 B1 banner

UteksolSolplast™ TH 45A9010 B1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:15.0 - 15.0 kN/m
Strain at Break:870.0 - 870.0 %
Compression Set (70 °C):26.0 - 26.0 %

Solplast™ TH 85A7016 A0 banner

UteksolSolplast™ TH 85A7016 A0

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:32.0 - 32.0 kN/m
Strain at Break:480.0 - 480.0 %
Compression Set (70 °C):95.0 - 95.0 %

Solplast™ TH 90A9000 D1 banner

UteksolSolplast™ TH 90A9000 D1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:32.5 - 32.5 kN/m
Strain at Break:470.0 - 470.0 %
Compression Set (70 °C):90.0 - 90.0 %

Solplast™ TH 70A8000 A banner

UteksolSolplast™ TH 70A8000 A

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:28.0 - 28.0 kN/m
Strain at Break:590.0 - 590.0 %
Compression Set (70 °C):68.0 - 68.0 %

Solplast™ TH 80A8000 A1 banner

UteksolSolplast™ TH 80A8000 A1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:27.0 - 27.0 kN/m
Strain at Break:550.0 - 550.0 %
Compression Set (70 °C):75.0 - 75.0 %

Solplast™ TH 40A9900 D banner

UteksolSolplast™ TH 40A9900 D

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:14.0 - 14.0 kN/m
Strain at Break:600.0 - 600.0 %
Compression Set (70 °C):83.0 - 83.0 %

Solplast™ TH 80A9021 C1 banner

UteksolSolplast™ TH 80A9021 C1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Extrusion
Tear Strength:28.0 - 28.0 kN/m
Strain at Break:740.0 - 740.0 %
Compression Set (70 °C):58.0 - 58.0 %

Solplast™ TH 70A7900 A0 banner

UteksolSolplast™ TH 70A7900 A0

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:28.0 - 28.0 kN/m
Strain at Break:530.0 - 530.0 %
Compression Set (70 °C):90.0 - 90.0 %

Solplast™ TH 70A7900 A0 by Uteksol is commonly used as Molding Resin for a variety of applications.

Elastex™ 873AT2 banner

AWP Rohstoff GmbHElastex™ 873AT2

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding, Extrusion
Strain at Break:600.0 - 600.0 %
Compression Set (70 °C):45.0 - 45.0 %

Elastex™ 873AT2 by AWP Rohstoff GmbH is comprised of Styrenic Thermoplastic Elastomer. It is commonly used

Kebaflex® / S 90 A.05 banner

BARLOG plastics GmbHKebaflex® / S 90 A.05

Strain at Break:700.0 - 700.0 %

BARLOG plastics GmbH Kebaflex® / S 90 A.05 is a TPE-S, Shore A90. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

Solplast™ TH 50D8900 A0 banner

UteksolSolplast™ TH 50D8900 A0

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:87.0 - 87.0 kN/m
Strain at Break:560.0 - 560.0 %
Compression Set (70 °C):70.0 - 70.0 %

Resiprene® 1065 banner

ResireneResiprene® 1065

Strain at Break:1260.0 - 1260.0 %

Resiprene® 1065 is a Thermoplastic Elastomer (TPE) easy to process and great for injection molding process.

Show

of 1,117 results