Products in Elastomers: Compression Molding

Stoner, Inc. E236 Urethane Mold Release is specially formulated as a release agent and anti-stick lubricant for molded urethanes. A light coating produces best results.

Vulkollan® 18W has an excellent level of properties such as high resilience, very low abrasion loss, extremely low compression set, high thermal stability, excellent tear and tear propagation resistance.

OSAKA 100 are used in special automatic spraying systems and have various applications.

CHEMLUBE® Calcium S has a Process aid for Butyl, EPDM, SBR and other elastomers. Improves dispersion when added at beginning of mix. Improves release when added at end of mix cycle. Facilitates removal of molded parts.

NR Natural Polyisoprene Rubber, Natural Rubber is to develop rubber solutions that will optimize your components performance in your applications.

Sircon SPG-30B has a high heat transfer / heat dissipation effect because it has good followability to the gap and high adhesion.

IIR Isobutylene Isoprene Rubber, Butyl, Bromobutyl, Chlorobutyl Rubber is to develop rubber solutions that will optimize your components performance in your applications.

Sircon TR (30T), since the material is silicone rubber, it shows stable characteristics even when used for a long time.

M.G. Polyblends HSC-T-384 is pioneer in developing heat shrinkable, heat curable molding compounds based on polyolefin material containing some specialty chemicals and mold release additives. Curing material (Peroxide particularly dicumyl peroxide) has not been included in this product (HSC-T-384) and hence it does not loses its processing as well as electrical properties during storage. That means it can be stored for any period of time. Users have to incorporate peroxide during sheeting of the material on a Two Roll Mill or mix in a mixer prior to use in Injection Molding. It offers excellent weathering and other electrical properties required in cable jointing applications. This compound offers antitracking properties in the molded product. Outstanding properties of this compound makes an excellent choice for the molding of heat shrinkable Rain Sheds, Cable Breakout Boots and End Caps.

Metox BW85 is a liquid peroxide initiator based on peroxides methyl ethyl ketone in an Ōalan plasticizer. Compared with the standard MEKP, it contains reduced content of hydrogen peroxide and water, and increased content of MEKP dimer.

PEROXAN BIB-80 P is Di-(2-tert.-butyl-peroxyisopropyl)-benzene 80%, Powder with chalk.PEROXAN BIB-80 P is used for the curing of unsaturated polyester resins.

PEROXAN PO-50 P is tert-Butyl peroxy-2-ethylhexanoate 50%, Powder with chalk.PEROXAN PO-50 P is used for the curing of unsaturated polyester resins.

Astlett Rubber Inc SKN3345 E is a copolymer of butadiene and acrylonitrile manufactured by cold emulsion polymerization technology. The product is a low Mooney, medium acrylonitrile polymer designed to aid in processing operations such as transfer and compression molding.

Pentox 40 is peroxide initiator for copolymerization of unsaturated resins polyester. They are mainly used with cobalt accelerators at temperature surroundings. These initiators are particularly suitable in those applications where it is required fast molding with transfer of the core, for example cold forming or in injection molding techniques. Compared to the Metox-50 hardener, they contain a lower amount of active oxygen. However, they show a similar one gel time and a greater exothermic effect, therefore, they are not recommended for use in production too thick layers in one operation, as well as for hardening gel coats.

Coruba Coru163 - White FDA Approved EPDM Rubber 60° shore is an FDA Approved grade of white EPDM synthetic rubber. Ideally suited where product needs to be FDA approved and needs to be non toxic.

A High Ethylene Polymer with Good Green Strength for Wire and Cable and Extruded Profiles

Coruba Coru108 Black EPDM (10% content) / SBR Rubber 70° shore. It is used where a cheaper quality material will suit – in simple applications such as packing pieces, dust seals, protection pads etc where the material is not coming under any duress and slight resistance is required.

Hypalon® CSM Chlorosulfunated Polyethylene Rubber is to develop rubber solutions that will optimize your components performance in your applications.

Astlett Rubber Inc SKN3335 E is a copolymer of butadiene and acrylonitrile manufactured by cold emulsion polymerization technology. The product is a low Mooney, medium acrylonitrile polymer designed to aid in processing operations such as transfer and compression molding.

Rubber52 0000 Rubber GranulesAxplas® Rubber52 0000 rubber grade is a mix of clean, washed granular chips rich in rubber with regular particle size. Minor quantities of polymers and wood are present. Please note the composition chart is a typical result and that all material fractions may vary by a few percent around the numbers shown in the pie chart.Produced from 100% recycled content, this product offers a range of user benefts, including: Low carbon input can reduce your carbon footprint Environmental gains from resource effciency Cost savings on raw materials Applications: Feedstock material Plastics wood manufacture Blending agent of filler for mixed plastic products Manufacture of panels, sheets and boards

CHEMLUBE® Ester 821 is Processing additive for H-NBR, NBR, XNBR and other acrylonitriles. Facilitates processing during calendering and improves extrusion profiles. Excellent plasticizing properties which increases scorch time. Eliminates mill sticking, improves mold flow and release.

Chengdu Dowhon Industry FD-251C is Excellent flow and mold release.

Polsil® GUM 100/70 is general purpose heat cured elastomer widely used for molding and extrusion in various industries.

CHEMLUBE® Zinc C is a General purpose processing aid for H-NBR, IR, NR and SBR elastomers. Has mild peptizing effect in NR compounds. Improves ingredient dispersion and lowers energy cost.

Sircon HR (30H), since the material is silicone rubber, it shows stable characteristics even when used for a long time.

Epiall® 1908-1 by Sumitomo Bakelite Company is comprised of Ethylene Propylene Copolymer. It is commonly used Epiall® 1908-1 is certified as UL Flame Rated. It is available in Granules form.

Metox VLHP90 is a liquid peroxide initiator based on peroxides methyl ethyl ketone in an Ōalan plasticizer. Compared with the standard MEKP, the initiator contains a reduced content of hydrogen peroxide, water and methyl ethyl ketone. May be used for curing unsaturated polyester resins (UPR), gelcoats, in the presence of cobalt accelerator. Especially recommended for curing gel coats due to very low content of hydrogen peroxide, water and methyl ethyl ketone. This high purity initiator can be used wherever the use of Permix-MC96 is demonstrated too fast gelling. Compared to Metox-BW85, it has a shorter gel and hardening time.

Slide Products Silicone Mold Release Agent (No. 40112N) keeps the most challenging parts from hanging up and stalling production. Extremely effective for injection and compression molding.

Metox BW90 is a liquid peroxide initiator based on peroxides methyl ethyl ketone in an Ōalan plasticizer. Compared with the standard MEKP, it contains reduced content of hydrogen peroxide and water, and increased content of MEKP dimer.

FVMQ Fluorosilicone or Fluorovinylmethylsiloxane Rubber is to develop rubber solutions that will optimize your components performance in your applications.

An Excellent Low Viscosity Polymer for High Quality Mechanical Goods

Neoprene® CR Polychloroprene Rubber to develop rubber solutions that will optimize your components performance in your applications.

Sircon SPG-20B has a high heat transfer / heat dissipation effect because it has good followability to the gap and high adhesion.

PEROXAN PK295 S1-V is Mixture of 1,1-Di-(tert-butylperoxy)-3,3,5-trimethylcyclohexane and tert-Butyl peroxy-2-ethylhexanoate Solution in odorless white spirits.PEROXAN PK295 S1-V is used for the curing of unsaturated polyester resins.