Products in Elastomers: Film Extrusion

Vatan Plastik San. Tic. AS ANTISTATIC MB 071 PP produced while carrying out production in polyoefins, static electric is gathered on the plastic product. Therefore, product gather excessive amount of dust. Such products used in automatic packaging machinery causes damage because of static electricity. Anti-static concentrated usage prevents the occurrence of static electric on the plastic product.

Vatan Plastik San. Tic. AS ANTIBLOCK MB 1001 PP concentrate usage enables air to flow around the film layers easily. It prevents the layer from sticking to each other. It helps films to be ordered in high speed.

ISOTHANE 1680A-E2 are polyether based thermoplastic polyurethane with good balanced qualities. They exhibit excellent high moisture vapor transmission. ISOTHANE® 1600 series can be processed by blown film extrusion.

Aaroprene® ATPR 1000 50A is a Thermoplastic Elastomer (TPE) material. It is available in North America for extrusion, film extrusion, or injection molding.

EP AO 107 is a Thermal and UV stability for polyolefins geo-membrane sheet which improve Oxygen-Index-Temperature (OIT) values.

Moplen EP310D is a High melt strength polypropylene impact copolymer resin

Endex 1040™ is a chemical foaming agent which utilizes innovative technology to produce superior quality foamed products. It has a high gas yield and the fast response time typical of exothermic chemical foaming agents, and generates fine, closed-cell foams, which result in moldings and extrusions of high quality.

ProFLOW 3000 is high flow rate (MFR 1500+) polypropylene resin that quickly melt to low viscosity Newtonian fluids.

ISOTHANE 1685A-E are polyether based thermoplastic polyurethane with good balanced qualities. They exhibit excellent high moisture vapor transmission. ISOTHANE® 1600 series can be processed by blown film extrusion.

Vatan Plastik San. Tic. AS SLIP MB 071 PP is used as internal and external slider in polyolefin. It ensures film surfaces to slide on each other and facilitates the opening of the layers. It provides operation opportunity in much lower temperatures with much higher efficiency thanks to its internal slider characteristics.

Aaroprene® ATPR 2000 50A is a Thermoplastic Elastomer (TPE) material. It is available in North America for extrusion, film extrusion, or injection molding.

Gaia® Antimicrobial AB 505 is an organic concentrate that helps to control or retard the growth of bacteria, fungus, and algae in plastic molded parts. Gaia® Antimicrobial AB 505 is a powerful additive concentrate produced in an LLDPE carrier resin for ease of dispersion. This product has been used in film, injection molding, and extrusion applications to control growth of bacteria, yeast, mold, and algae. In independent testing, Gaia® Antimicrobial AB 505 has been shown to inhibit ecoli and staphylococcus. A loading of 1.5% - 3% will protect plastic articles for an estimated 1 – 2 years. Recommended temperature range should not reach above 428°F.

Maskom masterbatch & Compound Technologies M 85025 is a PP ANTIBLOCK. Prevents agglomeration due to rolls wrapped before sufficient cool-down in thin film extrusion process, particularly during summer. Applied at a rate of 1-4%.

European Plastic Joint Stock Company PP Filler Masterbatch is compounded of Calcium Carbonate CaCO3, Polypropylene PP as the carrier and other special additives by twin-screw machines.

Aaroprene® ATPR 1000 80A is a Thermoplastic Elastomer (TPE) material. It is available in North America for extrusion, film extrusion, or injection molding.

Bifix PE 401-60 is a snow white master with the basic purpose for painting thin foils and products in the technique of injection molding. Contains a mixture of mineral anti-blockages. Possible application in blowing technique and for making geomembranes.

Bifix PE 491-42 is a master with 40% soot SRF type and mineral anti-block for use in injection molding, and in the manufacture of thicker foils and pipes.

EP AO 100 will improve process stability.

A-Len (Aleko Polymers) CLARIFYING MASTERBATCH NC02TY is a clarifying masterbatch which increase transparency of polypropylene final products.

Maskom masterbatch & Compound Technologies M 85006 is a PE SLIP. Employed as a lubricant in extrusion process at a rate of 1-3% Facilitates to thin film extrusion and seamless delamination. Allows extrusion at lower temperature and energy.

Endex 1725™ is a 25% concentrate in a polymer carrier. It can be used in a wide range of commodity and engineering plastics, combining quality and efficiency with the benefits of versatility and cost effectiveness.

Cel-Span® Process Aid 332 is a non-clear compounded product containing a high level of thermal stabilizers and CAC0₃ to provide protection of film resins during high temperature extrusion and lamination processes, thus maximizing inherent physical properties of the natural al resins. CelSpan® Process Aid 332 eliminates build up in both internal and external metal surfaces of the extrusion die, as well as reduction of wrinkles in thin gage films. This product will extend Tio₂ up to 5% without loss of opacity.

ADD-PA 2020A is flow aids that has been developed specifically for use in transparent products.This product series has been developed for use in transparent applications such. B. films. Here are the major factors an excellent distribution and the optimal transparency of the final products.

Endex NBC 2750™ is a 50% concentrate in a polymer carrier. It can be used in a wide range of commodity and engineering plastics, combining quality and efficiency with the benefits of versatility and cost effectiveness.

Aaroprene® ATPR 1000 70A is a Thermoplastic Elastomer (TPE) material. It is available in North America for extrusion, film extrusion, or injection molding.

ADD-PA 2401 is flow aids that has been developed specifically for use in transparent products.This product series has been developed for use in transparent applications such. B. films. Here are the major factors an excellent distribution and the optimal transparency of the final products.

ISOTHANE 1680A-E3 are polyether based thermoplastic polyurethane with good balanced qualities. They exhibit excellent high moisture vapor transmission. ISOTHANE® 1600 series can be processed by blown film extrusion.

Aaroprene® ATPR 2000 70A is a Thermoplastic Elastomer (TPE) material. It is available in North America for extrusion, film extrusion, or injection molding.

Bifix PE 401-43 is a snow white economical master, popular in the production of pharmaceutical packaging and household products. Contains mineral fillers and anti-blocking.

A-Len (Aleko Polymers) ANTIBLOCK АВ70TС is an antiblock masterbatch intended to create an air layer between the surfaces of the opaque sleeve film of LDPE and/or LLDPE at blow film extrusion to avoid its blocking.

Polylink Polymers P-93010-UV is high molecular weight hindered amine light stabilizer (HALS) masterbatch based on polyolefins. It contains blends of stabilizers dispersed in the polymer matrix in the state of the art plant to give excellent performance in extreme climatic conditions.

Birch Plastics BirCom AM05 is the active antimicrobial ingredients prevent it from growing, producing energy, replicating or inhibiting any further growth. BirCom AM05 antimicrobial does not wear off or leach out over time and provides long-lasting and effective product protection from microbes.

Bifix PE 491-35 is an economically viable black master with blue tone characteristic application in injection molding and production of foils thicker than 40 micrometers.

ISOTHANE 1685A-E2 are polyether based thermoplastic polyurethane with good balanced qualities. They exhibit excellent high moisture vapor transmission. ISOTHANE® 1600 series can be processed by blown film extrusion.

European Plastic Joint Stock Company PE Filler Masterbatch is the Polyethylene based masterbatch containing fine pure Calcium Carbonate CaCO3 powder, polyethylene PE as the carrier and other appropriate additives.

Aaroprene® ATPR 1000 60A is a Thermoplastic Elastomer (TPE) material. It is available in North America for extrusion, film extrusion, or injection molding.