Products in Elastomers: Film Extrusion

Maskom masterbatch & Compound Technologies M 85025 is a PP ANTIBLOCK. Prevents agglomeration due to rolls wrapped before sufficient cool-down in thin film extrusion process, particularly during summer. Applied at a rate of 1-4%.

Aaroprene® ATPR 2000 50A is a Thermoplastic Elastomer (TPE) material. It is available in North America for extrusion, film extrusion, or injection molding.

Endex 3750™ is a 50% concentrate in a polymer carrier. It can be used in a wide range of commodity and engineering plastics, combining quality and efficiency with the benefits of versatility and cost effectiveness.

Bifix PE 401-52 is a standard milky white master designed for painting medium-demanding applications in thick film extrusion and injection molding. Contains 50% pigment.

Bifix PE 401-53 is a high quality master of snow white tone. It contains an anti-block, and is suitable for use in injection molding and extrusion of foils thicker than 40µm.

A-Len (Aleko Polymers) CLARIFYING MASTERBATCH NC10TY is a clarifying masterbatch which increase transparency of polypropylene final products.

Gaia® Antimicrobial AB 505 is an organic concentrate that helps to control or retard the growth of bacteria, fungus, and algae in plastic molded parts. Gaia® Antimicrobial AB 505 is a powerful additive concentrate produced in an LLDPE carrier resin for ease of dispersion. This product has been used in film, injection molding, and extrusion applications to control growth of bacteria, yeast, mold, and algae. In independent testing, Gaia® Antimicrobial AB 505 has been shown to inhibit ecoli and staphylococcus. A loading of 1.5% - 3% will protect plastic articles for an estimated 1 – 2 years. Recommended temperature range should not reach above 428°F.

A-Len (Aleko Polymers) ANTIBLOCK AB20TY is an antiblock masterbatch intended to create an air layer between the surfaces of the opaque sleeve film of LDPE and/or LLDPE at blow film extrusion to avoid its blocking.

BNX 1249 is a multifunctional stabilization system for plastics, elastomers, and adhesives. It is particularly effective under demanding processing conditions (high temperature, high shear) and under both aerobic and anaerobic conditions.

Javachem® GT-300 is silicone additives are UHMW siloxane polymers that provide the balance of internal and external lubrication, and help address the problems such as die buildup, appearance defects, unstable line speed and insufficient flame retardancy. We can provide silicone additives with different carriers whatever the content or medium is, to satisfy customers’ different requirements and provide quick response in product service.

Franplast Translucent USP Cl. VI is translucent SEPS based compound, perfect for medical applications. Without PVC and latex, biocompatible and without phthalates, it is a transparent and soft thermoplastic rubber, which represents an optimum alternative to silicone. It can be used for the realization of various soft touch components for medical use as injection ports, twist off closures, connectors, tubes for peristaltic pumps, joints, stoppers, gaskets, valves and membranes.

Endex 1020™ is a high efficiency, pelletized concentrate in a thermoplastic polymer carrier. It is designed for use in moisture sensitive engineering plastics, especially POLYCARBONATE and PET. It is intended to be used at high processing temperatures, 205 - 315°C (400 - 600°F).

Maskom masterbatch & Compound Technologies M 85024 is a PE ANTIBLOCK. Prevents agglomeration due to rolls wrapped before sufficient cool-down in thin film extrusion process, particularly during summer. Applied at a rate of 1-4%.

Endex ABC 2750™ is a 50% concentrate in a polymer carrier. It can be used in a wide range of commodity and engineering plastics, combining quality and efficiency with the benefits of versatility and cost effectiveness.

Endex 1010™ is a high efficiency, pelletized concentrate in a thermoplastic polymer carrier. It is designed for use in moisture sensitive engineering plastics, especially POLYCARBONATE and PET. It is intended to be used at high processing temperatures, 205 - 315°C (400 - 600°F).

Taroprene™ 1A55 E1N by Taro Plast is commonly used as Film Resin for a variety of applications. It is available in Pellets form.

Endex 4221™ is a high efficiency pelletized concentrate, in a thermoplastic polymer carrier. It is designed for use in both commodity and engineering plastics, and may be dried with the polymer if needed. It combines its endothermic properties, quality and efficiency, with versatility and cost-effectiveness.

Cromex EVA-CG 12920 is used in films extrusion.

ADD-PA m 2401 is flow aids that has been developed specifically for use in transparent products.This product series has been developed for use in transparent applications such. B. films. Here are the major factors an excellent distribution and the optimal transparency of the final products.

Kraton G1645 M is a linear triblock copolymer based on styrene and ethylene/butylene. It is supplied from North America in the physical form identified below. Kraton G1645 MO - supplied as a dusted, dense pellet The product exhibits the following characteristics: Supplied as a dusted, dense pellet in small plastic bags. Enhanced midblock for increased compatibility with the polypropylene. Good UV and thermal stability as with all KRATON G type products. Low melt flow designed for stability in blown film applications.

Aaroprene® ATPR 2000 60A is a Thermoplastic Elastomer (TPE) material. It is available in North America for extrusion, film extrusion, or injection molding.