Products in Elastomers: Profile Extrusion

METABLEN™ A 3000 is an acrylic-modified polytetrafluoroethylene (PTFE) used in vacuum molding, foam molding, blow molding and profiling. It improves the melt tension that is required in these processing methods by minimizing increases in melt viscosity, without sacrificing the inherent properties of thermoplastics.BenefitsIncreases melt tension of a resinMaintains fluidityEnhances die swellImproves the flexural modulus, heat deformation temperature, and other properties of polypropyleneAnti-drip effect with flame-retardant resinsImproves filler dispersibilityBetter surface appearanceIncreases foam expansion ratioApplicationsAutomotiveConsumer goodsElectric and electronics*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Espolex® 4832 is a recyclable TPV that combines thermoplastic processing capabilities with rubber-like behavior. It demonstrates excellent processability in extrusion, calendar, and blow molding processes, while also exhibiting low die drool during extrusion.   Applications: Automotive interior skin Sheets Tubes Film/skins/foils Hoses Profiles Body seals/weather stripping   Features: Low die drool Rubber-like elasticity and feel   Benefits: Recyclable Soft touch feeling

Espolex® WT361 is a thermoplastic elastomer with low die drool. It is a recyclable TPV that processes like a thermoplastic and acts like rubber. It is used in films, skins, foils, body seals, weatherstripping, hoses, tubes, and profile extrusion. This product is suitable for Extrusion.   Applications: Large components Appliances Automotive Interior Trim Boat Jet-propelled Vehicle   Features: Airbag Covers Interior Trim Handle Grips   Benefits: Excellent Low Temperature Ductility

ECP 280 is a magnetic compound based on special blends of magnetic additive compounded into TPE in such a way as to optimize physical and magnetic properties during processing. Normally supplied blue.

BRUGGOLEN® Recycling R8895 is a recycling additive for polyolefines. It is used for upcycling Polypropylene from car battery cases: Repair of damage in the polymer chains by a novel chemical system. High-quality recyclates for demanding long-term applications Prolonged retention of mechanical properties during long-term heat aging. Neutralization of acidic contaminations. One-Pack solution stabilizes the recycling process. Bruggolen® R recycling additives improve the polyolefin recycling processes and help recyclers to produce higher-value polyolefine recyclates for long-term applications. For the first time, the new repairing technology allows repairing damages from prior use.

Terratek® FX2200 is a unique elastomeric bioplastic with a diverse range of potential applications. This material is suitable for injection molding, profile extrusion, and sheet extrusion.

BRUGGOLEN® TP-R2090 is our recycling additive for polyolefins Bruggolen® R recycling additives improve the polyolefin recycling processes and help recyclers to produce higher value polyolefine recyclates for long term applications. For the first time the new repairing technology allows to repair damages from prior use. BRUGGOLEN® TP-R2090 for Upcycling of post-industrial and post-consumer polypropylene waste streams: Repair of damage in the polymer chains by novel chemical system. High quality recyclates for demanding long term applications Prolonged retention of mechanical properties during long term heat aging. One-Pack solution stabilizes the recycling process

Lucofin® 1460 by Lucobit AG is comprised of Polyethylene Copolymer and Thermoplastic Polyolefin Elastomer. It is commonly used It is available in Granules form.

80 Shore A TPENoble Polymers Flextuff series of Thermoplastic Elastomer Compounds (TPE) offer rubber-like feel with the ease of processing and recyclability of a thermoplastic. This unique family of products are developed using the highest quality raw materials and additives to create soft feel materials in a wide range of hardness levels for both injection molding as well as extrusion processing methods.Flextuff TPE compounds are used in applications such as grips, seals, over-molded handles and many other applications in the commercial, automotive, sports and leisure and building and construction industries.Features Include:Durometer (hardness) range from 25 - 90 Shore AAvailable in natural, black or custom colorsAdditive packages include: UV stabilization, scratch and mar resistanceFormulations for injection molding as well as profile extrusionCustomized formulations available to meet your specific needAll Flextuff products are 100% recyclable

Lucofin® 1461 by Lucobit AG is comprised of Polyethylene Copolymer and Thermoplastic Polyolefin Elastomer. It is commonly used It is available in Granules form.

ADD-PA 340 is flow aids copolymers which are produced with an ACR monomers with latex. These flow aids represent high molecular weight products, which are mounted on a multilayer structure.

An Ultra Fast Curing Polymer for Sponge and Dense Extrusions

Lucofin® 1453 by Lucobit AG is comprised of Polyethylene Copolymer and Thermoplastic Polyolefin Elastomer. It is commonly used It is available in Granules form.

The Addisil™ 472 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf-life of 6 months for the single component if stored appropriately Very long pot life of 2 to 4 weeks for the mixed components.

Lucolit® 1322 by Lucobit AG is comprised of Polyethylene Copolymer and Thermoplastic Polyolefin Elastomer. It is commonly used It is available in Granules form.

Lucofin® 1455MB by Lucobit AG is comprised of Polyethylene Copolymer and Thermoplastic Polyolefin Elastomer. It is commonly used It is available in Granules form.

Lucofin® 1410 by Lucobit AG is comprised of Polyethylene Copolymer and Thermoplastic Polyolefin Elastomer. It is commonly used

A Highly Extendable DCPD Polymer with Heavy Hydrotreated Paraffinic Oil for TPO/TPV and Thermoset Applications

The Addisil™ IND 1070 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80° Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months as of manufacturing date Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.

60 Shore A TPENoble Polymers Flextuff series of Thermoplastic Elastomer Compounds (TPE) offer rubber-like feel with the ease of processing and recyclability of a thermoplastic. This unique family of products are developed using the highest quality raw materials and additives to create soft feel materials in a wide range of hardness levels for both injection molding as well as extrusion processing methods.Flextuff TPE compounds are used in applications such as grips, seals, over-molded handles and many other applications in the commercial, automotive, sports and leisure and building and construction industries.Features Include:Durometer (hardness) range from 25 - 90 Shore AAvailable in natural, black or custom colorsAdditive packages include: UV stabilization, scratch and mar resistanceFormulations for injection molding as well as profile extrusionCustomized formulations available to meet your specific needAll Flextuff products are 100% recyclable

Lucolit® 1321 by Lucobit AG is comprised of Polyethylene Copolymer and Thermoplastic Polyolefin Elastomer. It is commonly used It is available in Granules form.

Addisil™ 2050 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80 Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits Good transparency, no yellowing Good mechanical performance Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf life of 6 months for the single components if stored appropriatelyM Very long pot life of 2 to 4 weeks for the mixed components Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations KTW: German Water Regulation. A representative sample has passed the test for tubes, fittings, seals and strorage systems (cold and warm) WRAS (BS 6920). A representative sample has passed the test (cold and warm) W270: Microbiological growth test. A representative sample has passed the test.

30 Shore A TPENoble Polymers Flextuff series of Thermoplastic Elastomer Compounds (TPE) offer rubber-like feel with the ease of processing and recyclability of a thermoplastic. This unique family of products are developed using the highest quality raw materials and additives to create soft feel materials in a wide range of hardness levels for both injection molding as well as extrusion processing methods.Flextuff TPE compounds are used in applications such as grips, seals, over-molded handles and many other applications in the commercial, automotive, sports and leisure and building and construction industries.Features Include:Durometer (hardness) range from 25 - 90 Shore AAvailable in natural, black or custom colorsAdditive packages include: UV stabilization, scratch and mar resistanceFormulations for injection molding as well as profile extrusionCustomized formulations available to meet your specific needAll Flextuff products are 100% recyclable

Birch Plastics BirCom AM05 is the active antimicrobial ingredients prevent it from growing, producing energy, replicating or inhibiting any further growth. BirCom AM05 antimicrobial does not wear off or leach out over time and provides long-lasting and effective product protection from microbes.

Purgex™ 459 Plus commercial purging compound is a ready-to-use blend consisting of active ingredients with a polyethylene carrier. Purgex products have mechanical activity for efficient cleaning, foaming action for enhanced mixing and a lubricant for easy removal. Purgex 459 is an ideal purging compound for tough resins.

The Addisil™ 452 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf-life of 6 months for the single component if stored appropriately Very long pot life of 2 to 4 weeks for the mixed components.

TheAddisil™ IND 2060 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80 Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits Good transparency, no yellowing Good mechanical performance Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf life of 6 months for the single components if stored appropriatelyM Very long pot life of 2 to 4 weeks for the mixed components Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.

The Addisil™ 480 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacture.

Fainplast Compounds Fainplast™ PVC PG 65/4 is a Polyvinyl Chloride + NBR (PVC+NBR) product. It can be processed by extrusion or profile extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.

The Addisil™ 140 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 70 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacturing.

Lucolit® 1323 by Lucobit AG is comprised of Polyethylene Copolymer and Thermoplastic Polyolefin Elastomer. It is commonly used It is available in Granules form.

Lucolit® 1310 by Lucobit AG is comprised of Polyethylene Copolymer and Thermoplastic Polyolefin Elastomer. It is commonly used It is available in Granules form.

A General Purpose Polymer for Hose, Extruded Profiles and Thermoplastic Elastomers

The Addisil™ 460 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacture.