Products in Parts & Shapes: Enhanced Physical Properties

EPDM 70 B WRAS G1 is a polymer made from ethylene, propylene, and a small number of diene monomers. These diene monomers provide cross-link sites that allow EPDM to be vulcanized. A small number of diene monomers form unsaturated groups pendant from the main saturated chain. These groups facilitate cross-linking reactions that do not affect the integrity of the polymer backbone. EPDM rubber has excellent heat, ozone and chemical resistance propertiesEPDM also has good physical properties and is resistant to polar fluidsLow-temperature properties require the polymer to be amorphous and low on ethylene (speak to the expert)Good electrical properties require high ethylene to facilitate high doses of inert mineral fillers to give good electrical resistanceEPDM rubber can be compounded to provide excellent electrical resistance

EPDM 80 B WRAS G1 is a polymer made from ethylene, propylene, and a small number of diene monomers. These diene monomers provide cross-link sites that allow EPDM to be vulcanized. A small number of diene monomers form unsaturated groups pendant from the main saturated chain. These groups facilitate cross-linking reactions that do not affect the integrity of the polymer backbone.EPDM rubber has excellent heat, ozone and chemical resistance propertiesEPDM also has good physical properties and is resistant to polar fluidsLow-temperature properties require the polymer to be amorphous and low on ethylene (speak to the expert)Good electrical properties require high ethylene to facilitate high doses of inert mineral fillers to give good electrical resistanceEPDM rubber can be compounded to provide excellent electrical resistance

EPDM 60 B WRAS G1 is a polymer made from ethylene, propylene, and a small number of diene monomers. These diene monomers provide cross-link sites that allow EPDM to be vulcanized. A small number of diene monomers form unsaturated groups pendant from the main saturated chain. These groups facilitate cross-linking reactions that do not affect the integrity of the polymer backbone.EPDM rubber has excellent heat, ozone and chemical resistance propertiesEPDM also has good physical properties and is resistant to polar fluidsLow-temperature properties require the polymer to be amorphous and low on ethylene (speak to the expert)Good electrical properties require high ethylene to facilitate high doses of inert mineral fillers to give good electrical resistanceEPDM rubber can be compounded to provide excellent electrical resistance

EPDM 50 B WRAS G1 is a polymer made from ethylene, propylene, and a small number of diene monomers. These diene monomers provide cross-link sites that allow EPDM to be vulcanized. A small number of diene monomers form unsaturated groups pendant from the main saturated chain. These groups facilitate cross-linking reactions that do not affect the integrity of the polymer backbone.EPDM rubber has excellent heat, ozone and chemical resistance propertiesEPDM also has good physical properties and is resistant to polar fluidsLow-temperature properties require the polymer to be amorphous and low on ethylene (speak to the expert)Good electrical properties require high ethylene to facilitate high doses of inert mineral fillers to give good electrical resistanceEPDM rubber can be compounded to provide excellent electrical resistance

P & P Technology Fire Retardant Nickel Graphite ES-Q-FR is a conductive silicone.

P & P Technology Black Nickel Graphite Silicone ECB-Q is a black silicone elastomer with a nickel / graphite conductive filler.

Bay Rubber Company NITRILE RUBBER COMMERCIAL GRADE has a number of good properties including good resistance to petroleum oils and aromatic hydrocarbons. NBR or Nitrile Buna-N Rubber is highly resistant to mineral oils, vegetable oils, and many harsh chemicals. It also has good elongation properties as well as adequate resilience, tensile strength and compression set. Applications of nitrile rubber include: fuel tanks, fuel tank gaskets, petroleum gaskets and fuel related rubber applications. Nitrile rubber is now commonly found in laboratories and facilities where testing involving chemicals takes place. Nitrile rubber holds up well in marine diesel tanks and aviation fuel gaskets.

Nitrile 4200-70 is nitrile seal ideal for use in a variety of applications.Parco 4200-70 seals are suitable for applications ranging from -35 to +250°F.

Robbins Rubber Neoprene Rubber Strips are a black-colored rubber that is used in applications where moderate levels of oil, petroleum, ozone, and weathering resistance are needed. Neoprene elastomers are very popular due to the broad range of applications in which they can be used.

Nitrile 4262-75 is a excellent compatibility with drilling muds and petroleum oils; withstands service demands of heavy equipment hydraulic systems; Parco’s lowest compression-set, sulfur-cure nitrile.

Bay Rubber Company Buna-N Nitrile O-Ring Cord has a number of good properties including resistance to petroleum oils and aromatic hydrocarbons. NBR or Nitrile Buna-N Rubber is highly resistant to mineral oils, vegetable oils, and many harsh chemicals. I Also has good elongation properties as well as adequate resilience, tensile and compression set.

RG45 is a red pure gum rubber sheet.

B70 is a commercial grade black nitrile sheet.

N40 contains general properties like good weather-resistance, moderate resistance to petroleum-based fluids and good physical properties.

Colmant Coated Fabrics Epdm Rubber Sheet is a copolymer of ethylene and propylene and a smaller amount of a diene monomer which forms chemically unsaturated ethylene groups pendant from the main saturated chain. These facilitate cross-linking reactions which do not affect the integrity of the polymer backbone. This feature gives EPDM excellent heat, ozone and chemical resistance. Physical properties are very good and resistance to polar fluids is generally good. Low temperature resistance is very good and EPDM can be compounded to give excellent electrical resistance.

Nitrile 2295-70 is Resists fuels rich in alcohol better than 4200-70 general-purpose nitrile seals; UL-listed for gasoline, diesel fuel, kerosene, naphtha and alcohol blends with up to 15% ethanol and methanol concentrations, high ACN content for very low swell in fuels; compound not recommended for hot air or ATF.

W60 is a food grade white nitrile sheet made from FDA-approved materials (Title 21 Food and Drug S 177.26000).

R75 is a commercial grade red sbr sheet, plate or fabric finish with good physical properties.

Nitrile 0228-70 is seal which meets the critical requirements of the motor vehicle industry to ensure vehicle safety and performance.

GF40 is a tan pure gum rubber sheet.

BL60 is a commercial grade black sbr sheet with good physical properties.

Nitrile 2276-70 is incorporating an organic internal lubricant, 2276-70 seals are well suited for dynamic applications requiring low-friction materials; very high ACN content and low plasticizer level provide oil resistance; used on power steering reservoir caps.

NCI is a commercial grade black neoprene sheet with nylon reinforcement and has chloroprene reinforced with 3.4 0z./Sq. yd. nylon fabric

CI is a commercial grade black sbr sheet, with cloth reinforcement and has excellent physical properties.

Nitrile 4367-70 nitrile seals are ideal for use in low temperatures and hydraulic fluids. Parco 4367-70 seals are suitable for applications ranging from -65 to +275°F.

B60 is a commercial grade black nitrile sheet.

P & P Technology Silver Copper Loaded Silicone EC-H is a silicone elastomer with Silver conductivefiller. It is tan in color.

NDIA is a commercial grade black neoprene sheet with nylon reinforcement and has chloroprene reinforced with 14.5 0z./sq. yd.nylon fabric

P & P Technology ECF-Q are constructed from silicone containing metal powder fillers which combine to produce high levels of attenuation with excellent environmental shielding and a high level of conductivity. Many types of filler, from nickel graphite to pure silver, are available to suit a wide range of applications. There are also Fluorosilicone variants for use in the presence of hydrocarbon contamination. The Conductive Silicone Range was originally developed for high performance shielding mainly for military applications. However, the introduction of lower cost llers has now made them accessible to the commercial sector. They are used where environmental and EMI screening is required but space constraints or stringent environmental protection necessitates a small cross section prole, often tted into a groove or channel.

GF490 is a tan pure gum rubber sheet.

Nitrile 4067-70 is nitrile seal ideal for use in low temperatures and hydraulic fluids. Parco 4067-70 seals are suitable for applications ranging from -65 to +240°F.

Nitrile 0209-70 is a high ACN content with low plasticizer level provides excellent resistance to petroleum oils, automatic transmission fluid (ATF), and crude oil; formulated as a transfer-moldable variant of Parco general-purpose nitrile 4200-70 for producing thick cross-section custom molded parts; used extensively in oil tool seals and packing elements for pressures to 1,500 psi.

N50 contains general properties like good weather-resistance, moderate resistance to petroleum-based fluids and good physical properties.

Nitrile 4457-65 is nitrile seal ideal for use in low temperatures and hydraulic fluids.Parco 4457-65 seals are suitable for applications ranging from -65 to +200°F.

SILFG is a food grade red silicone sheet, In compliance with FDA 21 CFR Part 177.

Robbins Rubber Neoprene Rubber Sheets are black-colored rubber that is used in applications where moderate levels of oil, petroleum, ozone, and weathering resistance are needed. Neoprene elastomers are very popular due to the broad range of applications in which they can be used. It is a talc-free powder.