Products in Elastomer Additives: Acrylonitrile Butadiene Styrene (ABS)

Suqian Unitechem Antioxidant 1076 is widely used in polyethylene, polypropylene, polystyrene, polyamide, polyester, synthetic rubber, grease, paints and lubricants, etc.

McLube® 1850 has excellent general-purpose release for any plastic compound. Will offer multiple releases per application. Dries instantly with no cure required.

Sinobase Polymers Chemical 770 is a white or yellowish crystalline powder. Melting point 80-86°C,relative density 1.05(at 20°C). It is used in polypropylene, impact modified PP ,TPO, EPDM, polystyrene, impact polystyrene, ABS, SAN, polyurethanes.

AO 1076 is a nonpolluting nontoxic Antioxidant with good heat‐resisting and water‐extracting performance. Widely applied to polyolefine, polyamide, polyester, polyvinyl chloride, ABS resin，synthesize rubber and petroleum product, often used with DLTP for promoting the antioxidative effect.

BNX DLTDP (123-28-4)is a thioether antioxidant. High solubility and superior properties make it particularly suitable for the protection of plastics, rubber, synthetic fibers, and petroleum products against deterioration and discoloration. Used in combination with phenolic primary antioxidants, it has proven particularly effective as a result of synergistic effects.

ADK STAB 1178 also called TNPP can be applied in polyolefins, ABS, PS, and engineering plastics.

Disheng Technology UV absorber UV-P hardly absorbs visible light, especially suitable for colorless, transparent and light-colored products.

Tepe Kimya Kresby TP 316 is used as dispersing agent in order to obtain better dispersion of fillers, especially Calcium Carbonate, pigment and carbon blacks. Calcium - Zinc Stearate improve the rubber or plastic compound flow of all kinds of plastic compounds which are calendered, extruded or used for transfer and moldings. Calcium - Zinc Stearate is compatible to all kind of Plastic PE, PP, ABS, PS,. etc and all rubber NR, BR, EPDM, CR, NBR, IIR, CSM, BR, EVA, ECO, CM.

New Particle Chemical Colors Corp. B233 ANTI-STATIC AGENT is a distilled monoglyceride B233 is a product of high purity,at least 96% monoglyceride content, and very good performance of anti-static agent that is generally recognized as safe for food packing materials. B233 is made from fully hydrogenerated animal oil.

LS 622 is a hindered amine light stabilizer. It is used in light aging inhibition of polyethylene, polypropylene, polyurethane, metaformaldehyde, polyamine and polyester, also in ABS and engineering plastics.

Shandong Chuanjun Chemical Antimonous oxide is generally used in matching with halogen compounds.used in flame retarding of plastic products, such as, PVC, PP,PE,PS,ABS,PU, etc; used as bulking agent and flame retardant in rubber industies, such as, conveyer belt, cable and so on; used as covering agent in enamel products and ceramic products; used as white dyes and flame retardant in painting industry; still used as organic synthesis activator, synthesis metal passivating agent. It is insoluble in water and Soluble in chlorhydric acid, sulfuric acid.

Markphos® PDDP is a Co-stabilization in combination with metal soaps in plasticized PVC up to 1.0%; in PU, ABS, and PC up to 3.0%.

Otsuka Chemical MAIB is an AZO type initiator. Technology in fabrics, resins, paints and adhesives is supported by catalyst chemistry in polymer chemistry. Otsuka Chemical contributes polymer industries by introducing variety of AZO type initiators in order to meet request from polymer industry with our technology.

ChemPlasa Materials L-1020 is Polarity Amide Wax which used as a functional additive in many industrial applications.

EVERNOX-B310 is used in polyolefins and olefins-copolymers such as LDPE, HDPE, LLDPE, PP and EVA. It can also be used in other polymers such as engineering plastics, styrene homo and copolymers such as PBT, PET, PA, POM, PS, ABS, PUR, elastomers BR, SBR, SBS, adhesives and other organic substrates. The B-blends can be used in combination with light stabilizers of UV-absorbers and hindered amine light stabilizers.

Shinepoly® LP2061 modifier is a acrylonitrile-styrene-acrylate (ASA) core-shell impact modifierwith an enhanced stabilizer package that provides superior weatherability, heat aging,impactperformance and excellent resistant of various chemical products. Because of the core-shell structure, the improvement in impact performance is obtained with onlyminor effect on other mechanical properties such as modulus and heat distortion temperature.

Everaox® 202 is phenol free, it has excellent thermal stability.

Plaox 3114 is one kind of multi-functional antioxidant, with multiple functional groups. It is of low toxicity and can be used in food packing. Plaox-3114 is used in ABS resin, polyester, Nylon, PE, PS, PVC, PU, cellulose plastic and rubber. It has synergistic effect with UV adsorbent or phosphite ester to improve the stability. The dosage is recommended to be 0.1 ~ 0.25 phr.

PEROXAN BHP-70 is tert-Butyl hydroperoxide 70%, Solution in water.PEROXAN BHP-70 is used for the copolymerization of styrene/butadiene (SBR rubber) and acryl nitrile/butadiene/styrene (ABS rubber) as well as for the emulsion polymerization of vinylacetate, (meth-)acrylates and acrylic resins dispersions.PEROXAN BHP-70 is used for the curing of unsaturated polyester resins and polymerization of styrene alkyde mixtures.

SUNOX® 1010 - a sterically hindered phenolic antioxidant-is a highly effective, non discolor- ing stabilizer for organic substrates such as plastics, synthetic fibers, elastomers, adhesives, waxes, oils and fats. It protects these substrates against thermo-oxidative degradation.

Hangzhou Hi-Tech Fine Chemical OB-1 is wdely used in ABS, PS, HIPS, PA, PC, PP, EVA and rigid PVC and other plastics. It can withstand high temperature of 375℃, especially suitable for engineering plastic products and fiber products processed at high temperature. When using fluorescent whitening agent OB-1 for PE and soft PVC, special attention should be paid to the control of the dosage. If the dosage is too much, the whitening agent will migrate.

Starbetter Chemical Materials Antimony Based Flame Retardant Synergist ST-FS-A2T has most formulas are using antimony trioxide (ATO) as flame-retardant synergist in halogen system. Meanwhile, the price of ATO is increasing rapidly and unpredictable and the antimony resource is getting less. It leads to the higher cost for most flame-retardant compounding manufacturers. Replace ATO with ST-FS-A2T, it can not only save the cost, but also decrease content of Pb, As and Hg. ST-FS-A2T can also improve the anti-aging and UV-resistant properties of flame-retardant compounding materials, but ATO has no such good properties. MAH or GMA functional group modifiers are recommended in the formula for good properties. This product is not suitable for PC (polycarbonate resin).

AO 3114 is a kind of tri‐function group phenolic antioxidant, without pollution and coloring up. Dependent on high molecular weight and melting point, it has low volatility, low transferring, and good water extraction resistance, while equips plastics with resistance to thermo‐oxidation and light‐oxidation. 3114 suits for PE, PP, PS, ABS, nylon, PVC, PU, cellulose and synthetic rubber, especially effective for polyolefin. When used with UV absorbent and phosphite ester, a synergistic effect can be reached, thus enhancing the thermo‐stability and light stability.

Libwax C is a Fatty Bisamidewax. Libwax - C is used in nearly all major plastic processing finding application as a lubricant, mold release agent, anti block and slip additives and as a dispersant for pigments and flame retardants.

AO 2246 is a high‐efficiency nonpolluting Antioxidant , applicable to the manufacture of synthetic rubber, latex and natural rubber, being one of excellent phenol Antioxidants. It is applicable to light colored or colored rubber product. In plastic industry, this product can prevent the thermal aging and light aging of polyester chlornamee,polystyrene,ABS resin, polyoxymethylene and cellulose resin with the dosage of 0.5‐1%.

Hsin Sou Chemical HSINSOU NYPAS mainly provide ABS and HIPS or other styrene resins the character of permanent anti-static property .Its chemical structure composed of hydrophilic and hydrophobic segments ,In order to keep the mechanical property of each styrene and cause permanent anti –static character by its hydrophilic segments.

ChemPlasa Materials L-206F is Ethylene Bis Stearamide which used as a functional additive in plastics manufacturing.

PEROXAN OHP is 1,1,3,3-Tetramethylbutyl hydroperoxide 85%, Solution in diisobutylene.PEROXAN OHP is used for the copolymerization of styrene/butadiene (SBR rubber) and acryl nitrile/butadiene/styrene (ABS rubber) as well as for the emulsion polymerization of (meth-)acrylates and acrylic resins dispersions.

ChemPlasa Materials L-102G is Ethylene Bis Oleamide which used as a functional additive in plastics manufacturing.

Antioxidant-1076 can be widely used for PE、PP、POM、ABS resin、PS、polyvinyl alcohol, engineering plastics, synthetic rubber and petroleum products.

AO-1098 is widely used for PA,such as Nylon 6, Nylon 66,PP,PE,ABS resin,and rubber,etc.

Baoding Lucky Chemical Antioxidant Lknox 2707 is used as resins for fuel oil, plastics, synthetic and coating materials, such as ABS, AS, NR, synthetic rubbers, PE, PE, POM, CPE, PU and other synthetic resins.

ULTRA-PLAST™ TP07 works effectively as an internal/external lubricant in most plastics and WPC composites. It has high heat stability and shows no discolouration at temperature up to 2300 C. ULTRA-PLAST™ TP07 can be used with coupling agents in WPC applications.

Disheng Technology UV absorber UV-538 is a high-efficiency ultraviolet absorber with excellent performance, which can absorb ultraviolet light of 270-340 nanometers; It has the characteristics of light color, non-toxic, good compatibility, low migration and easy processing.

Antioxidant 3030 is applied to high density PE, PP,rubber, PVC, PA, ABS resin,polyester and other plastic products,etc.