Products in Elastomer Additives: Nitrile Butadiene Rubber (NBR)

MBZ Powder is a Rubber Antioxidant.

Mercure F and its combinations with booster accelerators are widely used in NR, SBR, NR-SBR / BR blends, NBR based rubber compounds used for the manufacture of rubber products such as cycle tires (black ” colored), footwear products, hot air cured rubber products, cables, rubber rollers, ebonite etc.

Tepe Kimya Kresby TP 316 is used as dispersing agent in order to obtain better dispersion of fillers, especially Calcium Carbonate, pigment and carbon blacks. Calcium - Zinc Stearate improve the rubber or plastic compound flow of all kinds of plastic compounds which are calendered, extruded or used for transfer and moldings. Calcium - Zinc Stearate is compatible to all kind of Plastic PE, PP, ABS, PS,. etc and all rubber NR, BR, EPDM, CR, NBR, IIR, CSM, BR, EVA, ECO, CM.

Richon® Vulcanizing Agent DTDC is mainly used for curing agent of natural rubber, styrene butadiene rubber, acrylonitrile butadiene rubber, which can partially or completely replace the sulfur. Applicable to the manufacture of cables, wires, heat-resistant products, thick products and medical rubber plug..It has good performance on mechanical properties, heat resistance, aging resistance, small compression permanent deformation, no blooming, long scorching time, fast curing, etc. It is best for tire, heat-resistant rubber products, health and color rubber products, and could replace of DTDM due to there is none nitrosamines release..

ULTRA-LUBE™ 790 is a processing additive designed as an internal lubricant for specialty polymers. Due to its low volatility, it can be used in heat resistant vulcanisates based on HNBR, ACM and FKM. ULTRA-LUBE™ 790 shows excellent lubricating properties, which leads to reduction of injection pressure in the molding process and prevents scorch. Its outstanding release effect also improves mold release and prevents sticking of compounds to rolls and rotors. ULTRA-LUBE™ 790 is very cost effective because it greatly reduces the reject rates of vulcanisates.

Taizhou Huangyan Donghai Chemical Accelerator M (MBT) is a semi-super accelerator and is widely used in natural rubber and synthetic rubber. It has a wide vulcanization range and can be used alone or in combination with thiocarbamates, thiurams, guanidines and other alkaline accelerators. When furnace carbon black is used, it is easy to cause early vulcanization, easy to disperse, no color, and no pollution. It has a bitter taste and is not suitable for food rubber products. It is mainly used to make tire tape, rubber shoes and other industrial rubber products. It is easily soluble in ethyl acetate, acetone, sodium hydroxide and sodium carbonate dilute solution, soluble in ethanol, but not soluble in benzene. Insoluble in water and gasoline, stable storage.

PEROXAN DC is Dicumyl peroxide 99%, Crystallin.PEROXAN DC is used for the (co)polymerization of styrene. It may also be used as co-agent in the production of flame retardant, expandable polystyrenePEROXAN DC is used for the crosslinking of natural rubber and synthetic rubber, as well as polyolefins.

ULTRA-LUBE™ 420 is a processing additive for applications in all elastomers. ULTRA-LUBE™ 420 provides very good lubricating effects and helps to improve flow and mold release. ULTRA-LUBE™ 420 shows excellent performance in highly filled EPDM compounds. No adverse effect on physicals is noted and its saturated structure makes it suitable for peroxide vulcanisation.

Go Yen Chemical Industrial Company GY-FR-OP15 can provide outstanding fireproof effect and can be applied on versatile plastic, polymer, resin, elastomers, adhesive compound.

Natrochem TBEP DLC-A is blend of tributoxyethyl phosphate and silicon-dioxide. Provides very low temperature flexibility to plastics and acrylonitrile elastomers. Used as a plasticizer and a flame retardant in adhesives. It may retard cure with large loadings. Incorporates rapidly; aids filler dispersion; and reduces pigment requirements in colored stocks.

ULTRA-FLOW™ 600 behaves similar to ULTRA-FLOW™ 500; it improves mixing and processing as well as the incorporation of compound ingredients. ULTRA-FLOW™ 600 is compatible with most types of elastomers, except for halogenated polymers.

Richon® ZMBT-15 Powder is used in Rubber auxiliary agents. It is hardly soluble in acetone, benzene, ethanol, and carbon tetrachloride. Insoluble in water, gasoline. Decomposed in strong acid and alkali..

PEROXAN HX-45 P is 2,5-Dimethyl-2,5-di-(tert-butylperoxy)-hexane 45%, Powder with chalk.PEROXAN HX-45 P is used for the curing of unsaturated polyester resins.PEROXAN HX-45 P is used for the crosslinking of natural rubber and synthetic rubber, as well as polyolefins.

ULTRA-LUBE™ 330 is a general processing additive in most common polymers. In highly filled compounds ULTRA-LUBE™ 330 prevents the agglomeration of filler, which leads to better uniformity of physical properties of the finished goods. This is particularly beneficial for extrusion of rubber profiles. The addition of ULTRA-LUBE™ 330 leads to faster incorporation of filler. ULTRA-LUBE™ 330 shows a positive influence on metal release, thus preventing sticking of the compounds to open mill rolls or internal mixer rotors. It also improves mold release.

Robinson Brothers Delta PM80 24273 is an active boost for use in EPDM.

4010NA(IPPD) is a Rubber Antioxidant.

PEROXAN PB-50 P is tert-Butyl peroxybenzoate 50%, Powder with chalk.PEROXAN PB-50 P is used for the curing of unsaturated polyester resins.PEROXAN PB-50 P is used for the crosslinking of natural rubber and synthetic rubber, as well as polyolefins.

Nanjing Shuguang Chemical Group Antioxidant SG-R 602 applies to nature rubber and synthetic rubbers such as SBR, NBR, chloroprene rubber, etc. with aging protection. It has protection from hot oxygen aging, flex fatigue and cracks. It can deactivate metals with various valences. SG-R 602 has remarkable heat anti-brittle function in chloroprene rubber, and strengthens the anti-ozone aging protection capability. It can reduce the Mooney viscosity of the chloroprene rubber, extend scorch time, enhance heat aging performance of the rubber material, increase the processing safety and the storage stability, so it is one of the most preferred antioxidants for chloroprene rubber.

Henan Connect Rubber Chemical TETD can be used for NR, IR, BR, SBR, NBR, IIR and EPDM. Similar to TMTD in applications, but offer better scorch safety and less blooming.

Henan Connect Rubber Chemical MBT (M) can be used as fast accelerator in NR, IR, BR, SBR, NBR, IIR and EPDM. Can be used alone or in conjunction with other basic accelerators.

Henan Kailun Chemical ANTISCORCHING AGENT PVI(CTP) has specific gravity: 1.25--1.35. It is Soluble in acetone, benzene, toluol, diethyl ether, ethyl acetate, hot CCl4 and hot alcohol, slightly soluble in gasoline and insoluble in derosene and water.

Rongcheng Chemical General Factory Accelerator MBT(M) has a pale yellow or white granular as a appearance.

HH1076 is widely used in polypropylene, polyethylene, polyester, polyurethane, polystyrene, ABS resin, polyamide, synthetic rubber and other polymer materials can also be used grease paint anti-thermal-oxidative aging.

Nurcacit TETD PDR is the natural rubber, styrene-butadiene rubber, nitrile butadiene rubber, butyl rubber, cis-butadiene rubber and latex’s super accelerator and vulcanizing agent. The active sulfur content is 11%, can be used as the neoprene’s modifier. In the rubber, this product is easy to disperse, does not change color, does not pollute, usually uses in making the electric cable, the rubberized fabric, the rubber shoes, the inner tube, the bright color product and so on.