Products in Elastomer Additives: Polypropylenes (PP)

Dragonox® 425 is a highly effective antioxidant used in synthetic resins such as ABS resin, polyethylene, and polypropylene. This product can also be used for light-colored rubber. It provides high anti-oxidation performance, thermal stability, and ultraviolet light stabilization.

Dragonox® 1098 can be widely used for nylon 6, nylon 66, PE, PP, PA, rubber, and so on. This product is non-discoloring and has low volatility, good extraction resistance in hot water, and a good synergistic effect with general antioxidants. The recommended use level for this product is 0.1－0.5%.

Dragonox® 1330 is used in polyolefins such as polyethylene, polypropylene, and polybutene for the stabilization of pipes, molded articles, wires, cables, dielectric films, etc. Furthermore, it is applied to other polymers, such as engineering plastics like linear polyesters, polyamides, and styrene homo- and copolymers. This product may also be used in PVC, polyurethanes, elastomers, adhesives, and other organic substrates.

Dragonox® 1076 is a phenolic primary antioxidant used for processing and long-term thermal stabilization. This product has good heat resistance and water extraction performance. It can be applied to polyolefins, such as polyethylene, polypropylene, and polybutene-1, as well as to other polymers, such as engineering plastics, styrene homo- and copolymers, polyurethanes, elastomers, adhesives, and other organic substrates.

Flytac 191’s is obtained by hydrogenating cracked C5 to achieve high-quality, multi-purpose, water-white thermoplastic hydrocarbon resin. This C5 hydrogenated hydrocarbon resin is mainly used for hot melt adhesives, and hot melt pressure sensitive adhesive tackifiers. It has good thermal stability, low odor, and good compatibility with SIS, APAO, etc.

Dragonox® B215 is a good synergistic blend of Dragonox® 1010 and Dragonox® 168. This product can retard the heated degradation and oxidative degradation of polymeric substances during processing and in end applications. It can be widely used for PE, PP, PC, ABS resin, and other petro products.

Flytac 192 is a water-white thermoplastic resin obtained from the polymerization of aromatic and hydrogenation. It is widely applied in hot melt adhesive (HMA), and pressure sensitive adhesive (PSA) because of its good heat resistance and good compatibility with base polymers such as SIS, EVA, SBS, SEBS, and polyolefin. It can also be used in road marking, BOPP masterbatch, and rubber compounding.

Jetfine® 3CW is a new, ultrafine, hyper platy, bright talc product for reinforcing the most critical TPO applications. It is produced in Canada by a state-of-the-art beneficiation and micronization process that yields a product with exceptional reinforcing, dispersion, and molding properties in polypropylene-based compounds. It is produced only in compacted form for good handling and faster compounding rates.

Jetfine® 3CC is an off-white, high-purity, extremely platy submicron talc with an optimum aspect ratio and excellent top-size control. It is recommended for the best balance of stiffness and impact strength and to maximize HDT, dimensional stability, impact strength, and esthetics in high-performance plastics, as well as for nucleation, foamed plastics, and plastic films. It is compacted for maximum extruder throughput, minimum dust, and improved dispersion.

TYTAN™ CP-219 is a coupling agent that can enhance the dispersion of inorganic fillers in polymer systems such as PP and PE by modifying the surface of filler particles. The content of fillers can therefore be increased, saving on the cost of polymer while maintaining the mechanical property.

TYTAN™ CP-317 is a coupling agent that can enhance the dispersion of inorganic fillers in polymer systems such as PP and PE by modifying the surface of filler particles. The content of fillers can therefore be increased, saving on the cost of polymer while maintaining the mechanical property.

TYTAN™ CP-326 is a coupling agent that can enhance the dispersion of inorganic fillers in polymer systems such as PP and PE by modifying the surface of filler particles. The content of fillers can therefore be increased, saving on the cost of polymer while maintaining the mechanical property.

DCL 2413 Diarylide Yellow, PY.13 is an AAMX medium-shade diarylide yellow offering good opacity and tinting strength compared to other diarylide pigments. It exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of inks, plastics, and coating applications.

DCL 5251 Phthalocyanine Blue, PB.15:1 (easy-to-disperse) is a low-cost, heat-stable, easy-to-disperse alpha-crystal form of red-shaded phthalocyanine blue pigment. It is FDA-approved (Section 178.3297) and also exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of plastic and coating applications.

DCL 2183-A Azo Yellow, PY.183 is a non-warping, red shade yellow with excellent heat stability, recommended for plastic applications. It is FDA-approved (Section 178.3297) and also exhibits good overall resistance properties, lightfastness, and weather fastness. This makes it a reliable and versatile choice for a wide range of plastic and coating applications.

DCL 2870 Naphthol Red, PR.170 is a blue-shaded red pigment for use where good overall fastness properties are required. It exhibits good overall resistance properties, including lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of paint, plastic, and ink applications.

DCL 8045 Buff Rutile Titanium Dioxide, PW.6 is a buff-colored (tan) rutile grade that offers comparable performance characteristics, such as opacity, to white TiO2. It can reduce the amount of some organic and other inorganic pigments, as well as some white TiO2 in selected formulations.

DCL AG120A Shiny Satin, 5 - 25 m is a silver-white transulcent pearlescent pigment with a satin finish. This product is composed of a mixture of titanium and mica that appears as a silver white powder. It is FDA-approved (Section 178-3297).

DCL 896 Zinc Oxide, PW.4 (USP Grade, French Process) is a high purity USP French Process grade of zinc oxide with a pigment white 4 color index. It finds major applications in plastics such as PVE, PE and PP, industrial and decorative coatings, and also in rubber materials.

DCL 1177 Anthraquinone Red, PR.177 is a transparent, non-warping, blue-shaded red with excellent fastness properties. It is FDA-approved (Section 178.3297) and can be used in a variety of plastics, including polyolefins and PVC, as well as PET, ABS, rubber, and styrene. Additionally, it is suitable for general industrial coatings and automotive applications.

DCL 2111 Isoindolinone Yellow, PY.110 is a semi-opaque, red shade yellow pigment with excellent lightfastness and heat stability. It is FDA-approved (Section 178.3297) and exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a range of coating, plastic, ink and rubber applications.

DCL 2181 Benzimidazolone Yellow, PY.181 is a red-shaded, non-warping yellow pigment that exhibits excellent lightfastness and resistance properties along with heat stability. This pigment is mainly recommended for a variety of plastic applications and is approved by the FDA under Section 178.3297.

DCL 1144 Disazo Red, PR.144 is a medium to slightly blue-shade red pigment with high purity, tinting strength, and excellent heat stability. It is primarily used in the coloration of plastics such as PVC, ABS, polystyrene, polyolefins, and polyester spin dyeing, and is also used in some specialty coatings and inks, though it can cause warpage in HDPE.

DCL RC-800-PG Rutile Titanium, PW.6 (Chloride) is a low oil absorption, chloride-process rutile titanium dioxide pigment, surface-treated with alumina and silica. It offers excellent tint strength and dispersibility, providing a bluish/white high dispersion product, and is approved for use under 21 CFR 178.3297 by the FDA.

DCL 2110 Isoindolinone Yellow, PY.110 is a transparent, red shade yellow pigment with excellent lightfastness and good heat stability. 2110 Isoindolinone Yellow, PY.110 is slightly more transparent and redder than 2111. This product is also approved by the FDA under section 178.3297.

DCL 2583 Diarylide Yellow, PY.83 is a very strong, bright, and transparent red shade of diarylide yellow with good lightfastness and bleed properties. It also exhibits good overall resistance properties, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of inks, plastics, and coating applications.

DCL Tan 221 Zinc Ferrite, PY.119 is a yellow pigment, primarily utilized in plastics due to its temperature stability up to 500°F. DCL Tan 221 Zinc Ferrite, PY.119 has excellent lightfastness and chemical stability. It is also recommended to be used in industrial and powder coating applications.

DCL 2316 Dianisidine Orange, PO.16 is a bright yellow shade orange with good opacity and tinting strength mainly for interior applications. This pigment is mainly used in the following applications: Plastics such as PVC and PE Powder and industrial coatings. Solvent flexo, water flexo and UV inks Rubber products

DCL 2113 Pyrazolone Orange, PO.13 is a bright, clean, transparent pyrazolone orange pigment with excellent tinting strength. 2113 has fair lightfastness in masstone/deep shades and is poor in tints. It is recommended to be used in a wide range of plastic, ink, and coating applications.

DCL 8086 Rutile Titanium, PW.6 (Sulfate) is a durable rutile titanium dioxide with good hiding power manufactured by the sulfate process. 8086 is surface treated alumina and silica to improve the dispersibility. It is mainly recommended for the construction industry.

DCL R2041 Rutile Titanium, PW.6 (Sulfate) is rutile titanium dioxide manufactured by the sulfate process. R2041 is surface-treated aluminum, silicon compounds, and organic matter for ease of dispersion and exterior durability. It is approved for food contact applications under 21 CFR 178.3297.

DCL 1233 Carbazole Violet, PV.23 is a high-performance pigment with a bluish-violet color and high tint strength. It exhibits excellent fastness to light and weathering in most applications and is only slightly affected by reductions with titanium dioxide.

DCL 5051 Phthalocyanine Blue, PB.15:1 is an alpha crystal form of a red-shaded phthalocyanine blue that is rendered solvent stable. 5051 is FDA-approved (Section 178.3297), and is recommended for applications such as general industrial paints, various coatings, printing inks, plastics, rubber, floor coverings, and textile printing.

DCL Orange GX Pyrazolone Orange, PO.13, is an orange pigment that provides a bright red shade of orange, commonly used in offset and aqueous inks. Additionally, DCL Orange GX is versatile enough to be used in a wide range of paint and plastic applications.

DCL 1073-A DPP Orange, PO.73 is a medium shade opaque orange pigment with very good light and chemical resistance. This pigment is mainly used in the following applications: Plastics such as PVC, PP, PS, PE and PET. Automotive/Aerospace, powder and industrial coatings. Solvent flexo inks Rubber products

Ultrablue® 7125, PB.29 (FG-75, 6302) is a low sulfur, low-moisture ultramarine blue pigment. It is FDA-approved (Section 178-3297) and exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of plastic and coating applications.