Products in Elastomer Additives: Polyvinyl Chloride (PVC)

DCL 2181 Benzimidazolone Yellow, PY.181 is a red-shaded, non-warping yellow pigment that exhibits excellent lightfastness and resistance properties along with heat stability. This pigment is mainly recommended for a variety of plastic applications and is approved by the FDA under Section 178.3297.

DCL RC-800-PG Rutile Titanium, PW.6 (Chloride) is a low oil absorption, chloride-process rutile titanium dioxide pigment, surface-treated with alumina and silica. It offers excellent tint strength and dispersibility, providing a bluish/white high dispersion product, and is approved for use under 21 CFR 178.3297 by the FDA.

DCL 1144 Disazo Red, PR.144 is a medium to slightly blue-shade red pigment with high purity, tinting strength, and excellent heat stability. It is primarily used in the coloration of plastics such as PVC, ABS, polystyrene, polyolefins, and polyester spin dyeing, and is also used in some specialty coatings and inks, though it can cause warpage in HDPE.

DCL 2110 Isoindolinone Yellow, PY.110 is a transparent, red shade yellow pigment with excellent lightfastness and good heat stability. 2110 Isoindolinone Yellow, PY.110 is slightly more transparent and redder than 2111. This product is also approved by the FDA under section 178.3297.

DCL 2316 Dianisidine Orange, PO.16 is a bright yellow shade orange with good opacity and tinting strength mainly for interior applications. This pigment is mainly used in the following applications: Plastics such as PVC and PE Powder and industrial coatings. Solvent flexo, water flexo and UV inks Rubber products

DCL Tan 221 Zinc Ferrite, PY.119 is a yellow pigment, primarily utilized in plastics due to its temperature stability up to 500°F. DCL Tan 221 Zinc Ferrite, PY.119 has excellent lightfastness and chemical stability. It is also recommended to be used in industrial and powder coating applications.

DCL 8045 Buff Rutile Titanium Dioxide, PW.6 is a buff-colored (tan) rutile grade that offers comparable performance characteristics, such as opacity, to white TiO2. It can reduce the amount of some organic and other inorganic pigments, as well as some white TiO2 in selected formulations.

DCL 8086 Rutile Titanium, PW.6 (Sulfate) is a durable rutile titanium dioxide with good hiding power manufactured by the sulfate process. 8086 is surface treated alumina and silica to improve the dispersibility. It is mainly recommended for the construction industry.

DCL 2113 Pyrazolone Orange, PO.13 is a bright, clean, transparent pyrazolone orange pigment with excellent tinting strength. 2113 has fair lightfastness in masstone/deep shades and is poor in tints. It is recommended to be used in a wide range of plastic, ink, and coating applications.

DCL 5051 Phthalocyanine Blue, PB.15:1 is an alpha crystal form of a red-shaded phthalocyanine blue that is rendered solvent stable. 5051 is FDA-approved (Section 178.3297), and is recommended for applications such as general industrial paints, various coatings, printing inks, plastics, rubber, floor coverings, and textile printing.

DCL 1233 Carbazole Violet, PV.23 is a high-performance pigment with a bluish-violet color and high tint strength. It exhibits excellent fastness to light and weathering in most applications and is only slightly affected by reductions with titanium dioxide.

DCL 5251 Phthalocyanine Blue, PB.15:1 (easy-to-disperse) is a low-cost, heat-stable, easy-to-disperse alpha-crystal form of red-shaded phthalocyanine blue pigment. It is FDA-approved (Section 178.3297) and also exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of plastic and coating applications.

DCL R2041 Rutile Titanium, PW.6 (Sulfate) is rutile titanium dioxide manufactured by the sulfate process. R2041 is surface-treated aluminum, silicon compounds, and organic matter for ease of dispersion and exterior durability. It is approved for food contact applications under 21 CFR 178.3297.

DCL 1073-A DPP Orange, PO.73 is a medium shade opaque orange pigment with very good light and chemical resistance. This pigment is mainly used in the following applications: Plastics such as PVC, PP, PS, PE and PET. Automotive/Aerospace, powder and industrial coatings. Solvent flexo inks Rubber products

DCL Orange GX Pyrazolone Orange, PO.13, is an orange pigment that provides a bright red shade of orange, commonly used in offset and aqueous inks. Additionally, DCL Orange GX is versatile enough to be used in a wide range of paint and plastic applications.

HIFILL® N 300 is a mineral additive that adds value to a wide range of plastic and rubber systems. It has better scratch and mar resistance, superior weatherability, and better fusion characteristics for PVC, among other benefits. HIFILL® N allows for formulation and processing cost reduction while not adversely impacting the products' physical properties and durability.

DCL AG153 Flashing Silver, 10 - 25 m is a silver-white transulcent pearlescent pigment with a glittery finish. This product is composed of a mixture of titanium and mica that appears as a silver white powder. It is FDA-approved (Section 178-3297).

Ultrablue® 3010, PB.29 (C-84) is an ultramarine blue pigment with low sulfur and moisture content. It is FDA-approved (Section 178-3297) and exhibits goo resistance properties, lightfastness, weather fastness, and heat stability. UltraBlue 3010 is highly versatile and suitable for use in a wide range of applications, such as coatings, plastics, paper, and rubber.

Ultrablue® 2320, PB.29 (E-28, 5008/6108/6128) is a low sulfur, low moisture ultramarine blue pigment. It is FDA-approved (Section 178-3297) and exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of plastic and coating applications.

HIFILL® 3 is a ground calcium carbonate filler produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have exceptional whiteness and are ideally suited for use in brightly colored, contractor-grade trade paints and masonry coatings. Its low oil absorption can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

DCL AG522 Red Brown Satin, 5 - 25 m is a reddish-shaded brown pearlescent pigment with a satin finish. This product is composed of a mixture of titanium and mica that appears as a silver white powder. It is FDA-approved (Section 178-3297).

HIFILL® N 1000 is a mineral additive that adds value to a wide range of plastic and rubber systems. It has better scratch and mar resistance, superior weatherability, and better fusion characteristics for PVC, among other benefits. HIFILL® N allows for formulation and processing cost reduction while not adversely impacting the products' physical properties and durability.

DCL AG120 Shiny Satin, 5 - 25 m is a silver-white transulcent pearlescent pigment with a satin finish. This product is composed of a mixture of titanium and mica that appears as a silver white powder. It is FDA-approved (Section 178-3297).

Ultrablue® 7125, PB.29 (FG-75, 6302) is a low sulfur, low-moisture ultramarine blue pigment. It is FDA-approved (Section 178-3297) and exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of plastic and coating applications.

Ultrablue® V8B2, PV.15 (V-8, 5012) is a low sulfur, low moisture ultramarine violet pigment. This product is mainly used in the following applications: Plastics such as PVC, PP, PS and PE. Powder and industrial coatings. Rubber and paper products Cosmetics applications

HIFILL® 5 is a ground calcium carbonate filler produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have exceptional whiteness and are ideally suited for use in brightly colored, contractor-grade trade paints and masonry coatings. Its low oil absorption can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

DCL AG173 Silk, 10 - 60 m is a silver-white transulcent pearlescent pigment with a brilliant finish. This product is a mixture of titanium and mica that appears as a silver white powder. It is FDA-approved (Section 178-3297).

Ultrablue® 6120, PB.29 (G-58, 5005) is a low sulfur, low-moisture ultramarine blue pigment. It is FDA-approved (Section 178-3297) and exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of plastic and coating applications.

HIFILL® N400 is a mineral additive that adds value to a wide range of plastic and rubber systems. It has better scratch and mar resistance, superior weatherability, and better fusion characteristics for PVC, among other benefits. HIFILL® N allows for formulation and processing cost reduction while not adversely impacting the products' physical properties and durability.

HIFILL® Air Floated Clay Filler 17 is a calcium carbonate filler and reinforcer that is produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have low oil absorption, which can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

DCL AG123 Fine Satin Silver, 5 - 25 m is a silver-white transulcent pearlescent pigment with a satin finish. This product is composed of a mixture of titanium and mica that appears as a silver white powder. It is FDA-approved (Section 178-3297).

Ultrablue® 3111, PB.29 (F-36, 6308) is a low sulfur, low-moisture ultramarine blue pigment. It is FDA-approved (Section 178-3297) and exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of plastic and coating applications.

HIFILL® N 1200 is a mineral additive that adds value to a wide range of plastic and rubber systems. It has better scratch and mar resistance, superior weatherability, and better fusion characteristics for PVC, among other benefits. HIFILL® N allows for formulation and processing cost reduction while not adversely impacting the products' physical properties and durability.

Ultrablue® 2108, PB.29 (E-62, 5151) is a low sulfur, low moisture ultramarine blue. It is FDA-approved (Section 178-3297) and exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of plastic, coating, rubber, and paper applications.

DCL AG323 Royal Satin, 5 - 25 m is a gold pearlescent pigment with a satin finish. It is FDA approved (Section 178-3297). This product is mainly used in the following applications Plastics such as PVC, PP, PS, PE and PET. Powder and industrial coatings. UV and offset inks. Rubber

HIFILL® 1 is a ground calcium carbonate filler produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have exceptional whiteness and are ideally suited for use in brightly colored, contractor-grade trade paints and masonry coatings. Its low oil absorption can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.