Products in Elastomer Additives: Automotive Interior Parts

METABLEN™ A 3000 is an acrylic-modified polytetrafluoroethylene (PTFE) used in vacuum molding, foam molding, blow molding and profiling. It improves the melt tension that is required in these processing methods by minimizing increases in melt viscosity, without sacrificing the inherent properties of thermoplastics.BenefitsIncreases melt tension of a resinMaintains fluidityEnhances die swellImproves the flexural modulus, heat deformation temperature, and other properties of polypropyleneAnti-drip effect with flame-retardant resinsImproves filler dispersibilityBetter surface appearanceIncreases foam expansion ratioApplicationsAutomotiveConsumer goodsElectric and electronics*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

OMNISTAB® UV 234 is a UV absorber of the hydroxyphenyl benzotriazole class. Has exceptional light absorbtion and good compatibility in various substrates.

OMNISTAB® AN 168 is a hydrolytically stable phosphite processing stabilizer. Also acts as an antioxidant.

OMNISTAB® AN 1010 is a pentaerythritol tetrakis[3-[3,5-di-tert-butyl-4-hydroxyphenyl]propionate. It is a sterically hindered phenolic primary antioxidant.

RIASORB® UV-2020 is a high molecular weight hindered amine light stabilizer (HALS). It shows excellent compatibility in the polymer and high extraction resistance.

Pure high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = 38 micron, D100 = 70 micron.

2B-NEFEX3 is composed of 3 microns Micronized Aluminum Silicate .

Paychlor K-45 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

SUNOX® 1076 is a sterically hindered phenolic antioxidant, is highly efficient, nondiscoloring stabilizer for organic substrates such as plastics, synthetic fibers, elastomers, adhesives, waxes, oilsand fats. It protects these substrates against thermo-oxidative degradation.

SUNOVIN® 5590L is a new type hindered amine light stabilized, efficient ultraviolet light absorber used in polypropylene, with advantages efficiency and nontoxic etc.

2B-ALUMET-M is composed of Calcined alumina metallurgical grade as it is, Diallyluminium trioxide, Al2O3 .

Yamaguchi Mica SYA-21R is ground by a media mill machine, which is suitable for mass production. Pure Indian muscovite which containsmuch more fully-grown crystals is used as the material and is processed with our high-level refinement and iron removalmethods that guarantee the quality of our products.

Paychlor K-62 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Irubond 700 is a compatibilizer, coupling agent in polyethylene system.

Yamaguchi Mica AB-25S is a series of high performance mica powder that realizes smooth and thin scale-like particles with high aspect ratio using agrinding machine uniquely developed by Yamaguchi Mica Co.,Ltd. It produces effects that the any other makers have nevereffectuated. Pure Indian muscovite which contains much more fully-grown crystals is used as the material and is processed with our high-level refinement and iron removal methods that guarantee the quality of our products.

Stoner, Inc. E206 Silicone Mold Release is specially formulated as a release agent and anti-stick lubricant for molded materials such as plastics, rubber, waxes, and similar materials. It is our most popular mold release because of its versatility and high performance.

d2p® Flame Retardant decrease the ignitability of materials and inhibit the combustion process, limiting the amount of heat released.

Makrostab® UV 2002-MD are stabilizer masterbatches used for increasing the UV stability of polymer. Their application is recommended in all cases where the basic stabilization from the resin producer is insufficient for a given application. The MAKROSTAB® masterbatches represent a simple and efficient solution to the additional stabilization of polymer at its last stage of conversion. They are successfully used in all processing technologies, e.g. injection and blow molding, tape extrusion or fiber production.

Yamaguchi Mica SB-061R is generally manufactured at lower cost due to high productivity using simple process comparing to the wet-groundmica. Our line up is the large particle size for plastics and friction materials.

Makrostab® UV 0724/1323 are stabilizer masterbatches used for increasing the UV stability of polymer. Their application is recommended in all cases where the basic stabilization from the resin producer is insufficient for a given application. The MAKROSTAB® masterbatches represent a simple and efficient solution to the additional stabilization of polymer at its last stage of conversion. They are successfully used in all processing technologies, e.g. injection and blow molding, tape extrusion or fiber production.

Polylink Polymers P-93020-UV is high molecular weight hindered amine light stabilizer (HALS) masterbatch based on polyolefins. It contains blends of stabilizers dispersed in the polymer matrix in the state of the art plant to give excellent performance in extreme climatic conditions.

Paychlor K-40 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Makrostab® UV 1022/1019 are stabilizer masterbatches used for increasing the UV stability of polymer. Their application is recommended in all cases where the basic stabilization from the resin producer is insufficient for a given application. The MAKROSTAB® masterbatches represent a simple and efficient solution to the additional stabilization of polymer at its last stage of conversion. They are successfully used in all processing technologies, e.g. injection and blow molding, tape extrusion or fiber production.

Dalian Lonsin New Materials LS1105H is fischer tropsch wax.

Cuts UV rays with a stronger emphasis on functionality. Used in sunscreen lotion, cosmetics, and about 80% of plastic products, UV-protection products are now firmly entrenched in the market, and customers tend to be more conscious of functionality. New possibilities for UV absorbers are being explored to respond to changes in people's needs. We are using our flexible ideas and development capacity to our advantage as we target the development of custom-made UV absorbers that will satisfy and please each and every one of our users.

SUNOX® DLTP is a dialkyl ester of thiodipro- pionicacid antioxidant. Used as a heat stabilizer in combination with a phenolic antioxidant for polymer. Offer very good color, processing and aging stability.

Paychlor D-40 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Sunlight together with heat and oxygen induces reactions of degradation in plastics, causing detrimental effects on their mechanical, optical and physical properties. The result is breakage, chalking and discoloration. Outdoor weathering results in degradation by exposure to the ultraviolet part of sunlight which reaches the earth’s surface, at wavelengths between 300 and 400 nanometres. Environmental factors like temperature, humidity, oxygen, polluting gasses also play an important role.

Dalian Lonsin New Materials OF9528 is oxidized wax.

Elafleks® DINP (Diisononyl Phthalate) is used as a softener in all PVC paste and pulp mixtures. Used in all calendaring systems, automotive sector, cable production, synthetic leather production, bookbinding fabric production, PVC and Floor Covering production.

2B-ATAB45FP is composed of Micronized Tabular Alumina, Diallyluminium trioxide, Al2O3 .

SUNOX® 168 is a secondary high performance phosphite antioxidant for organic polymers. Exhibits reduction in polymer degradation during processing. Provides improved gas fading performance in many applications. Imparts higher phosphorous content than competitive phosphite antioxidants.

Hangzhou Hi-Tech Fine Chemical AC7000 plastic products are widely used in demanding, such as high-density EVA the PE shoe material, NBR + PVC insulation materials, auto parts, etc. is especially suitable for the size of the mold pressing EVA foam and the free mode of rubber and plastic foam; commonly usedin EVA MD granulation injection, PE molded foam of PVC molding, extrusion coating, and rubber and plastic molded foam and rubber extrusion, molding foam.

Yamaguchi Mica SJ-005 is a fine-ground mica powder that has been finished by a wet-grinding machine and then re-ground by a dry jet mill.Thinning and impurity reduction compared to those produced by dry grinding. It is used as a high-performance, high-qualityparticulate mica powder, especially for plastics and paints that require a good appearance.