Products in Elastomer Additives: Rigid Films

EverGlide® MB450 is a low density polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB1450 is a polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB350 is a Linear Low Density Polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB150 is a Polypropylene Homopolymer (PPH) which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EVERNOX-2246 is one of the most widely used antioxidants for white, light colored and transparent vulcanates that are based on natural or synthetic rubbers. In light colored vulcanates, it retards the crazing effect caused by exposure to light. It does not influence processing and vulcanizing properties. It exhibits low volatility and migration which makes it suitable for use in POM and ABS. EVERNOX-2246 is listed in Section 175.105 of the Food Additives Regulations as a component food packaging adhesives and in Section 177.2600 as a component of rubber articles intended for repeated use in contact with food. Total antioxidant is not to exceed 5% by weight of rubber product. It is also permitted for use in olefin polymers per Section 178.2010 at levels not to exceed 0.1 wt. % of the finished product, in contact with foods of high water content, alcoholic beverages, moist and dry solids containing no free fat or oil on the surface, etc.

Rosin Chemical(Wuping) JH- I33 Silane Coupling Agent acts as a silane coupling agent. Can also be used as an intermediate to produce many kinds of coupling agents and silicone fluids. It restrains the penetrating out of PVC additive, keeping the plastic clean. JH-I33 silane coupling agent is applicable to synthesize vulcanized rubber with low penetrativity, low rolling resistance as well as high elasticity & elongation rate. The fabric can be made softened and more elasticized by it. Used in the rubber industry, the strength of polyurethane elastomer can be enhanced by inducing polarized chloropropyl group from JH-I33 silane coupling agent. It is suitable to be used as absorbent for polyurethane foam to improve its climate adaptability.

Cel-Span® Process Aid 610L is a processing concentrate in a compatible resin carrier used in extrusion and injection processes to enhance flow and reduce the processing temperature while increasing productivity for all types of polyolefin resins. Cel-Span® Process Aid 610L contains a unique additive that enhances the flow characteristics of polyolefin resins, reduces cycle time, while improving mold filling in multiple cavity molds. In extrusion and blow molding applications, Cel-Span® Process Aid 610L enhances flow and reduces processing temperature of polyolefin resins as much as 30 to 50 degrees. This reduction in processing and melt temperatures results in less polymer degradation, better color, lower cycle time and higher output especially in sheet, injection molding,and blow molding applications, and extrusion applications.

Rosin Chemical(Wuping) Terpene Resin T-120 acts as a tackifier. It is processed from natural turpentine. It doesn't crystallize. It is transparent, neutral, electrically insulating, hydrophobic and non-poisonous. It can resist sparse acid, sparse alkali, heat, light and aging and has excellent viscidity. It dissolves easily in different kinds of synthetic matter such as fragrant hydrocarbon and vegetable oil. It is also an ameliorant of hot melting material. Terpene resin is widely used as industrial material in plastics, rubber, electric cable and packaging.

PEROXAN MI-60 KPX + is Mixture of Methyl isobutyl ketone peroxide and tert-Butyl peroxy benzoate Solution in TXIB.PEROXAN MI-60 KPX+ is used for the curing of unsaturated polyester resins as such or in presence of a cobalt accelerator in the temperature range of 60° to 150°C.

PEROXAN BCC-75 is Di-(4-tert-butyl-cyclohexyl)-peroxydicarbonate 75%, Powder in water.PEROXAN BCC-75 is used for the (co)polymerization of vinylchloride and vinylidenechloride.

BNX 1076 (2082-79-3)is a hindered phenolic antioxidant that provides excellent processing and long-term thermal stability in a wide variety of organic substrates such as plastics, synthetic fibers, elastomers, adhesives, waxes, oils, and fats.

PEROXAN EPC-50 WN-A is Di-(2-ethylhexyl)-peroxydicarbonate 50%, in water and methanol.PEROXAN EPC-50 WN-A is used for the (co)polymerization of vinylchloride and vinylidenechloride.

Polyfill Technologies Antistatic Masterbatch-PT3002 is a surface property modifier, which now-a-days finds extensive use by Plastics Processor, to reduce and control the static charges developed on the surface of plastic parts having large surfaces like film, fibers etc as spark discharge formed by static charges can produce serious accidents. Plastics, particularly sensitive to static build up Polyolefins, Nylon, Polyesters, Urethanes, Cellulosics, Acrylics etc. Antistatic Masterbatch-PT3002 is based on Ethoxy Amine, using LLDPE as a carrier resin, compounded in most modern extrusion equipment, using state of art technology.

Everstab 531 is an UV-absorber for PP, PE, PVC, acrylic polymers, polycarbonate, EVA and polyesters etc

Gaia® Antimicrobial AB 504 is an organic concentrate produced from citrus extracts that control or retard the growth of bacteria, fungus, and algae in plastic rotational molded parts. Gaia® Antimicrobial AB 504 is a powerful additive concentrate produced in an LLDPE carrier resin for ease of dispersion. Gaia® Antimicrobial AB 504 is used in the inner core of the rotationally molded structures. This product is used especially in molded polyethylene water tanks used throughout Latin America

PEROXAN DI-30 is Diisobutyryl peroxide 30%, Solution in odorless white spirits.PEROXAN DI-30 is used for the polymerization of vinylchloride.

PEROXAN ME-50 LA3 X is Methyl ethyl ketone peroxide Solution in TXIB.PEROXAN ME-50 LA3 X is used for the curing of unsaturated polyester and vinylester resins at ambient temperature in combination with cobalt accelerators.

Cel-Span® S 100 is a compounded additive for color stabilization and dispersion. A unique proprietary compounding technique makes it possible to pelletize the entire active stabilizer and dispersant in the formulation without adding additional heat history. Cel-Span® S 100 should be utilized at 0.25% to 1% consistently during the color concentration manufacturing processes for stabilization and dispersion. Cel-Span® S 100 also lessens degradation of pigments and enhances the brightness of color concentrates. The pigment is initially dispersed by dispersing agents in order to prevent the formation of uncontrolled flocculates; a process of contact and adhesion whereby the particles of dispersion form larger-size clusters. Stability of dispersion is a result of interplay of the heat (kinetic) energy of particles, attractive inter-particle forces, and repulsive forces; this also helps to limit short-range Van der Waals forces.

Cel-Span® UVS 717 is a (HALS) concentrate containing a stabilizer package for injection blow molding, extrusion and film applications for polyethylene. Hindered Amine Light stabilizers are the most effective light stabilizers for polyolefins. HALS is extremely efficient because these special additives continuously repopulate themselves during the UV stabilization process.

PERGAPROP HX-20 PP is 2,5-Dimethyl-2,5-di-(tert-butylperoxy)-hexane 20%, Granules with Polypropylen.PERGAPROP HX-20 PP is used for the production of controlled rheology polypropylene (CR-PP).

Rosin Chemical(Wuping) Terpene Resin T-90 acts as a tackifier. It is processed from natural turpentine. It doesn't crystallize. It is transparent, neutral, electrically insulating, hydrophobic and non-poisonous. It can resist sparse acid, sparse alkali, heat, light and aging and has excellent viscidity. It dissolves easily in different kinds of synthetic matter such as fragrant hydrocarbon and vegetable oil. It is also an ameliorant of hot melting material. Terpene resin is widely used as industrial material in plastics, rubber, electric cable and packaging.

Rosin Chemical(Wuping) Terpene Resin T-80 acts as a tackifier. It is processed from natural turpentine. It doesn't crystallize. It is transparent, neutral, electrically insulating, hydrophobic and non-poisonous. It can resist sparse acid, sparse alkali, heat, light and aging and has excellent viscidity. It dissolves easily in different kinds of synthetic matter such as fragrant hydrocarbon and vegetable oil. It is also an ameliorant of hot melting material. Terpene resin is widely used as industrial material in plastics, rubber, electric cable and packaging.

Everstab LS944 is recommended for various applications which require high light stabilization of polymers including PP. HDPE. ABS. PS. PMMA. SAN. PVC. Nylon. Polyesters. Polyacetal ETC. Main applications are-Polypropylene fibers; Polypropylene tapes; LDPE film; EVA film.

EVERNOX-10 and / or EVERNOX-10GF is a sterically hindered phenolic antioxidantwith a highly effective, non-discoloring stabilizer for organic materials. It protects these materials against thermo-oxidative degradation.

PERGAQUICK A3 S is N,N-Diethylaniline 10%, Solution in styrene.PERGAQUICK A3 S is used as an accelerator for curing of unsaturated polyester resins at ambient temperature in combination with Dibenzoyl peroxide (PEROXAN BP-types).

Cel-Span® Process Aid 101 is a 100% active (powder or pellet) internal lubricant processing aid with anti-static properties that are incorporated into the resin. Cel-Span® Process Aid 101 eliminates the need for an external mold release agent and improves resin flow, dispersion, resin additives ex:(reinforcements, fillers, and pigments), and reduces cycle time. The use of Cel-Span® Process Aid 101 will not have an adverse effect on the physical properties. Compatible with Polyethylene, Polystyrene, and Polypropylene.

ProFLOW 3000 is high flow rate (MFR 1500+) polypropylene resin that quickly melt to low viscosity Newtonian fluids.

Makrostab® UV 0724/1323 are stabilizer masterbatches used for increasing the UV stability of polymer. Their application is recommended in all cases where the basic stabilization from the resin producer is insufficient for a given application. The MAKROSTAB® masterbatches represent a simple and efficient solution to the additional stabilization of polymer at its last stage of conversion. They are successfully used in all processing technologies, e.g. injection and blow molding, tape extrusion or fiber production.

BNX 549 (123968-25-2)is a multifunctional antioxidant for the stabilization of plastics and elastomers. Unlike conventional phenolic antioxidants, BNX 549 is effective to scavenge alkyl (carbon-centered) radicals. The product is particularly active under demanding processing conditions (high temperature, high shear) and under anaerobic conditions.

Makrostab® UV 1022/1019 are stabilizer masterbatches used for increasing the UV stability of polymer. Their application is recommended in all cases where the basic stabilization from the resin producer is insufficient for a given application. The MAKROSTAB® masterbatches represent a simple and efficient solution to the additional stabilization of polymer at its last stage of conversion. They are successfully used in all processing technologies, e.g. injection and blow molding, tape extrusion or fiber production.

BNX 2777 (40601-76-1 & 31570-04-4)is a primary and secondary antioxidant blend using an phenolic antioxidant (BNX 1790) and a phosphite type antioxidant (Benefos 1680). The primary antioxidant provides superior polymer stabilization and has excellent compatibility with polymeric HALS’s and UVA’s. The secondary antioxidant provides excellent heat stability and antioxidation, with good compatibility with resins and excellent extraction resistance.

Benefos 1626 (26741-53-7)is a phosphite type antioxidant of high phosphorous content. This secondary antioxidant provides excellent heat stability and reduction in polymer degradation during processing. Benefos 1626 has good synergism when used with light stabilizers such as benzophenones and benzotriazoles.

PEROXAN LP is Dilauroyl peroxide 98%, Flakes.PEROXAN LP is used for the (co)polymerization of vinylchloride, vinylidenchloride, acrylates and methacrylates.

PEROXAN DDP is Didecanoyl peroxide 98%, Flakes.PEROXAN DDP is used for the (co)polymerization of ethylene, vinylchloride, vinylidenchloride, acrylates and methacrylates.