Products in Elastomer Additives: Tires

GP-204 (N,N'-1,3-Phenylene bismaleimide) is used to prevent reversion and improve the heat resistance, anti-aging properties and adhesion of the rubber and tire cord and vulcanized rubber modulus. GP-204 (1,1’-(1,3-phenylene)bis-1H-pyrrole-2,5-dione) is a non-sulfur vulcanizing agent. GP-204 PDM (N,N′-(1,3-Phenylene)dimaleimide) is used primarily in EPDM and chlorosulfonated poly ethylene applications.

AL 69C is a 50/50 mixture of AL69 with N330 carbon black to form a free flowing granule that is easy to use and at the same time utilize the properties of the AL 69 silane. AL 69 is a bifunctional polysulfidic organosilane for the rubber industry. It is used to improve the reinforcing capability of fillers with silanol group on their surface (e.g., silicas, silicates, clay, etc.), and also as an integral part of curing systems to improve crosslinking network properties.

RBR Clay belongs to 20 Microns' hard and soft clay range products which act as a reinforcing filler with huge techno-commercial benefits in rubber compounding formulation.

NITRIFLEX® Styrene Butadiene Resin (SBR) S-6H by Valex Group is commonly used as Reinforcing Resin for a variety of applications. It is available in Powder form.

Synsil VN3 is a precipitated and modified amorphous silica product uniquely developed to provide rapid incorporation in rubber matrix & excellent dispersion behavior. They offer high filler loading with favorable rheological and mechanical properties and excellent calendaring properties. It imparts a superior matting effect & surface appearance, low tension & compression set with good aging properties and provides superior abrasion resistance.

FloraRez® 785 is a glycerol ester derived from highly hydrogenated gum rosin. This thermoplastic resin exhibits a very pale color and demonstrates remarkable resistance to oxidation and color degradation. It serves as a valuable tackifying resin component in diverse applications such as adhesives, inks, coatings, and personal care formulations, particularly in scenarios where oxidative stability is essential.

Vaporlite® 90 (Uncoated) is the uncoated ultra fine sub-micron natural calcium carbonate. The submicron particles can act as spacers between TiO2 particles leading to an increase in the efficiency of TiO2 in the application.

Thanecure® T9 Superfine is the dimer of 2,4-toluene diisocyanate (TDI). It is a polyfunctional isocyanate used as a vulcanizing agent for specialty millable polyurethane rubbers, as a crosslinker for adhesives and as an adhesion promoter for rubber-to-fabric bonding.

Our Calcined Clay - Hyper 200 R is calcined metakaolin produced by removing chemically bound water from the crystal structure. This Calcined clay is brighter than most water-washed clays, offering excellent processing and reinforcement in rubber application.

Zincamine (Zinc Dicyanatodiamine) is an activator for sulfur curing of EPDM and diene rubbers. Zinc(2+) bis(carbonylazanide) diamine; also provides activation for blowing agents.This product is produced in the USA at our plant in Dayton, TN.

Rubber accelerator used to vulcanize "Viton®" fluoroelastomer and polyacrylate elastomers. Cross-linking agent in rubber processing; latent amine source in polyurethane production. Hexamethylenediamine carbamate for use as cross-linking agent in the vulcanization of vinylidene fluoride-hexafluoropropylene copolymer and vinylidene fluoride-hexafluoropropylene-tetrafluoroethylene copolymer elastomers.This product is produced in the USA at our plant in Dayton, TN.

FloraRez® HR is gum rosin that has been subjected to a high degree of hydrogenation. This results in a nearly colorless thermoplastic resin that has excellent thermal and oxidative stability characteristics, which are a result of the hydrogenation process. Compared to unmodified gum, wood, and tall oil rosins, FloraRez® HR offers the highest degree of color and solubility stability for its derivative products.

Delam Clay 802 P is a specially processed levigated delaminated kaolin with large & platy particles having a high aspect ratio which eventually reduces gas, vapor permeability which means improving barrier property in rubber inner-liners and other applications. In tire tread rubber compositions, it partially replaces silica and/or carbon black while maintaining acceptable physical properties of the rubber compositions and acceptable performance characteristics of the tires.

Vaporlite® CTD (Coated) is a surface treated ultra fine sub-micron natural calcium carbonate. The submicron particles can act as spacers between TiO2 particles leading to an increase in the efficiency of TiO2 in the application.

Hyper 60 DV is a calcined metakaolin produced by removing chemically bound water from the crystal structure. This calcined clay is then specially treated with organo silane of two different chemistry.

Coating Clay 90 is submicron kaolin (China Clay) produced by a special milling technique that creates a optimized narrow particle size distribution. The platy nature of Coating Clay 90 in combination with its controlled particle size results in unmatched properties as a reinforcing agent in rubber application.

Pepton® 44 RO peptiser efficiently reduces the viscosity of natural rubber and general purpose synthetic elastomers during mastication at elevated temperatures. Pepton® 44 RO is an improved and more efficient version of Pepton® 44 Prills.

Hyper MP 33 a speciality calcined clay developed by calcining the purest and processed Kaolin.

Andisil® 6920 Silane is a bifunctional, sulfur-containing organosilane used in combination with white fillers that contain silanol groups for rubber applications.

Hyper 60 DM is a calcined metakaolin produced by removing chemically bound water from the crystal structure. This calcined clay is then specially treated with organo silane of two different chemistry.

AL PS-40, a precipitated, non-crystalline, amorphous silica, is an excellent silica for improving mechanical properties of rubber and elastomers. Due to its high level of absorption, it can be used as a carrier for liquid additives in applications such as animal feed. It is also an excellent thickener in liquid systems.

AL PS-33 is an economical rubber reinforcing silica. The combination of high reinforcing, good abrasion resistance and ease of processing make it a good choice for formulators. It enhances the physical and mechanical properties of many rubber compounds.

FloraRez® PR is gum rosin that has undergone partial hydrogenation. It is a pale-colored resin with excellent thermal and oxidative stability characteristics due to the hydrogenation process. Compared to unmodified gum, wood, and tall oil rosins, it offers a higher degree of color and solubility stability for the derivative products produced from it.