Products in Elastomer Additives: Extrusion

Natro-Cel 6102-A is a naval stores-based NR, SR plasticizer, softener. Aids extrusions and processing; renders stocks tacky. Has no effect on cure rate. Prevents scorch.

Booster EP is a reactive polymer blend, which is polyolefin and elastomeric in nature. It depends on hydrogen abstraction followed by a controlled reaction of available free radicals. It is capable of alloying with a wide variety of thermoplastics and elastomers and it can stabilize a complex mixed polymer system, both polar and non-polar. It consists of several components and its reactivity is partly activated in the production process.

Cel-Span® CFA 800 is an endothermic foaming agent concentrate recommended for injection molding & extrusion applications for a variety of thermoplastic resins such as polyethylene, polypropylene, styrenics, MPPO and ABS. Cel-Span® CFA 800 is recommended for extrusion, and structural foam molding of polyolefins, polystyrene, MPPO and ABS. This product exhibits a very fine cell structure compared to a typical endothermic foaming agent in extrusion applications. This product has been engineered to eliminate splay and to exhibit good surface esthetics for solid injection foam parts.

Bifix PE 491-42 is a master with 40% soot SRF type and mineral anti-block for use in injection molding, and in the manufacture of thicker foils and pipes.

EKFLEX 2000 is a non-phthalate plasticizer that boasts a major advantage in terms of performance vs. cost, which sets it apart from other plasticizers more commonly used in the marketplace.

European Plastic Joint Stock Company BIO Filler Masterbatch is made of calcium carbonate (CaCO3) and bio resin as carrier. It has compatibility with PLA, PBS, PBAT and TPS.

Robinson Brothers ZBeD/ZBEC 20354 acts as safe-processing secondary accelerator.

PERGAPROP HX-10 PP is 2,5-Dimethyl-2,5-di-(tert-butylperoxy)-hexane 10%, Granules with Polypropylen.PERGAPROP HX-10 PP is used for the production of controlled rheology polypropylene (CR-PP).

Dongguan Liangsu Masterbatch Technology C5027 is made of high quality Calcium Carbonate and other special additives after extrusion molding from high performance twin-screw machine. It is widely used for polyolefin material in the process of extrusion, injection, plastic blowing, film blowing, casting, etc. When it is put into use, we can reduce material cost, and improve the character of final products.

Cel-Span® CFA 840 is a 40% active endothermic foaming agent concentrate, suitable for a variety of olefin resins such as polyethylene and polypropylene. Cel-Span® CFA 840 is recommended for extrusion, injection, and structural foam molding of polyolefins.

POLYB® PA-490 is an additive added to attain improvement for processing of polyolefin resin at very low levels usage(100~100ppm). It is a white powder made of modified fluoro-elastomer. polymer processing aid is coated at the inside of the die wall and decreases the friction between melted resin and the die wall.

Anhui Taichang Chemical Titanate Coupling Agent TC-F is monoalkoxy-coupling agent and similar to KR-TTS (Kenrich Chemical Company, USA). It is a kind of good agent for surface treatment of inorganic filler and magnet particle.

Endex NBC 2750™ is a 50% concentrate in a polymer carrier. It can be used in a wide range of commodity and engineering plastics, combining quality and efficiency with the benefits of versatility and cost effectiveness.

Marshall Additive Technologies SDAOM 100% Ammonium Octamolybdate smoke suppressant.

Shinepoly® LP2092 is the key raw material for transparent toughening PMMA resin. It exhibits high transparency and high toughness.

WELLPREN® IM878 is most suitable for substitution of Acrylic impact modifier (AIM) or blending with Acrylic impact modifier (AIM) with a certain percentage without adjusting the processing data and the formulation, resulting in an optimum performance /cost solution. All in, WELLPREN®RESIN helps fabricators and compounders meet increasing critically performance requirements and cost control needs.

Mercure MBT is semi ultra-fast accelerator / its combinations with booster accelerators are used in NR, SBR, NR-SBR/BR blends, NBR, IIR, EPDM and other synthetic rubber based compounds used for the manufacture of motor cycle and scooter tires, butyl tubes, cycle tires and tubes, beltings, retreading materials, footwear, hot air cured products, hoses, cables and miscellaneous molded and extruded rubber products.

GreenChemicals SPA GC PP HF 200 is a flame retardant based on phosphorus and Nitrogen, free of halogens and antimony. Fire retardant properties are based on an intumescent system. GC PP HF 200 application results in compounds with delayed flame propagation and is used in PP homopolymers and copolymers, PP modified with elastomers, all density PE and other thermoplastic elastomers olefins. GC PP HF 200 has many advantages: high thermal stability, low alteration of the physical-chemical properties of compounds and excellent processability in extrusion and injection molding. GC PP HF 200 formulation is free of corrosion problems, due to the absence of halogenated components.

Silanogran Silanogran SI-69/GR 70 offers improvement of mixing properties e. g. reduction in Mooney viscosity, better processability when mixing, calendering and extruding and influences the physical-mechanical data of the vulcanizates favorably.

ULTRA-BLEND™ 6000 is a non-staining homogenizer that improves the homogeneity of polymer blends of different polarities and different viscosities. It also increases green tack of rubber compounds by showing some synergism with tackifying resins. Due to its light color, ULTRA-BLENDTM 6000 is recommended for white and colored compounds.

Ficel® HC ES 3050 is used as Flexible PVC, Rigid PVC, Polyolefin.

Shandong Fine Chemical Technology NOBS is an excellent prolongation accelerator. It can be used alone or in combination with a small amount of additives. It is widely used in NR, SBR, NR-BR/SBR rubber compounds, in NBR and other synthetic rubber compounds, and used in the production of automobile tires, tire retreading materials, conveyor belts, and power. Transmission belts, rubber products with thick cross-sections, rubber products with heavy kinetic energy stress, rubber products with complex shapes, rubber shoes, injection products, cables, and various other molded and extruded rubber products.

TRACEL® TSE 3140 ACR MICRO is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.

MoldWiz® INT-3944 is a processing aid additive with anti-static properties which is incorporated directly into the resin eliminating the need for an external mold release agent. FRP molds require a surface coating to seal the porosity and maintain the gloss. An effective addition of process aid additive will not have any adverse effect on the cured resin. Thermoplastic molded parts will be stress-free and thermoset parts may have improved Barcol hardness. The complex polymeric nature of the process aid additive will not interfere with secondary operations such as decorating, silk screen printing, painting, bonding or plating.

Schlicht Handelsgesellschaft A206 Silicone mold release agent is a versatile silicone mold release and non-stick lubricant for molding plastics, rubber, waxes and similar materials that require a food grade release agent. A206 is designed as a universal release agent for processing temperatures up to 260°C.

V-PEAS - External lubricant for calendering, extrusion, blow and injection molding. V-PEAS VG is the vegetable based version.

Shandong Fine Chemical Technology ZDBC is widely used for the manufacture of NR/SR latex based products such as surgical gloves, condoms, latex threads, prevulcanized latex, for transparent goods and heat resistant products, high transparency teats and rubber bands, balloons,NR-latex bonded sports surfaces, etc. DRY RUBBER COMPOUNDING: ZDBC is used in the manufacture of NR / IR based transparent molded products, bright white /bright colored rubber products, footwear, transparent tubings etc. And as a secondary accelerator for the manufacture of bloom-free EPDM and NR-EPDM blend based molded and extruded rubber goods.

Ficel® AZ 4 is used as Flexible PVC, Polyolefin/Plastisol/Rubber.

A-Len (Aleko Polymers) ANTIBLOCK АВ70TС is an antiblock masterbatch intended to create an air layer between the surfaces of the opaque sleeve film of LDPE and/or LLDPE at blow film extrusion to avoid its blocking.

Bifix PE 491-35 is an economically viable black master with blue tone characteristic application in injection molding and production of foils thicker than 40 micrometers.

Nitrophor™ FR2000 is a kind of new low halogen environmentally friendly flame retardant with N, P and Br for PP. NitrophorTM FR2000 has advantages of low dosage, low bromine content, no migration and no need of Sb2O3. Besides, it is also suitable for mineral filling system and masterbatch system. Products with NitrophorTM FR2000 can pass the tests of UL 94 V-2 (1.5mm), GWFI 850°C and GWIT 750°C.

Preniphor™ EPFR-110DM is a kind of halogen free environmentally friendly flame retardant with N and P, especially designed for polypropylene, polyethylene and other advanced polyolefin products. Preniphor™ EPFR-110DM contains acid source, gas source and carbon source, taking flame retarding effect by intumescent flame retarded mechanism.

TRACEL® TSE 7135 ACR is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.

Hangzhou Hi-Tech Fine Chemical HH-JS is mainly used for PVC and PS profiles, plates, sheets of extrusion injection foam, such as blinds, picture frames and other low-foam plastic products, TPR soles and high-grade PVC injection slippers, sandals.

EP AO 100 will improve process stability.

Cel-Span® Process Aid 610L is a processing concentrate in a compatible resin carrier used in extrusion and injection processes to enhance flow and reduce the processing temperature while increasing productivity for all types of polyolefin resins. Cel-Span® Process Aid 610L contains a unique additive that enhances the flow characteristics of polyolefin resins, reduces cycle time, while improving mold filling in multiple cavity molds. In extrusion and blow molding applications, Cel-Span® Process Aid 610L enhances flow and reduces processing temperature of polyolefin resins as much as 30 to 50 degrees. This reduction in processing and melt temperatures results in less polymer degradation, better color, lower cycle time and higher output especially in sheet, injection molding,and blow molding applications, and extrusion applications.