Products in Performance Additives: Polystyrenes (PS)

METABLEN™ C 223A is a butadiene-based rubber and graft copolymer. It is used as an impact modifier for ABS, polyamides, PC, PLA, and other matrix resins in automotive and transportation, electrical and electronics, and consumer goods applications.FeaturesImpact resistanceSuper high impact strength in all temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Afcona - 7476 is a dispersant with high affinity towards acidic and neutral carbon black, fiberglass, and other pigments.

Andisil® 1150 Silane contains two disilanyl groups. This unique structure enables it to have better adhesion and weather resistance.

BDDP is mainly used for plastics as flame‐retardant, widely for PP,PE,PS,ABS resin rubber fiber etc high molecular material and electronic industry. Especially for PP Plastics. It is the most excellent flame‐retardant for PP Plastics to now.

McLube® 2100 contains finely divided PTFE that works its way into every microporosity on the mold surface to seal the substrate for an enhanced releasing effect. Silicone-free.

Diene™40AC15 is a solution polymerized plastics grade medium cis polybutadiene, featuring excellent color and low gel. It is low in solution viscosity and contains a non-volatile and TNPPfree antioxidant system. Diene™ 40AC15 is primarily used as an impact modifier for thermoplastic resins such as HIPS and ABS.

ChemPlasa Materials L-205F is Ethylene Bis Stearamide which used as a functional additive in plastics manufacturing.

ChemPlasa Materials L-203P is Ethylene Bis Stearamide which used as a functional additive in plastics manufacturing.

ChemPlasa Materials L-201 is Ethylene Bis Stearamide which used as a functional additive in plastics manufacturing.

SAK- DMS by Sun Ace is a dispersible magnesium stearate. Acts as an acid scavenger, lubricant, mold release agent, extender and water repellent agent. SAK- DMS contains vegetable-based fatty acid and metal. Exhibits excellent lubricating and dispersing properties and stabilizing, hydrophobic and foam inhibiting effects. Compatible with thermoplastics. Used in plastics and rubber.

SAK- DZS by Sun Ace is a dispersible zinc stearate. Acts as an acid scavenger, lubricant, mold release agent, extender and water repellent agent. SAK-DZS contains vegetable-based fatty acid and metal. Exhibits excellent lubricating and dispersing properties and stabilizing, hydrophobic and foam inhibiting effects. Compatible with thermoplastics. Used in plastics and rubber.

ULTRA-PLAST™ WF101 contains amide, which has reactive sites available for hydrogen bonding and can therefore act as a coupling agent between polymer and filler. ULTRA-PLAST™ WF101 acts as an efficient blending and dispersing agent in wood filled systems, leading to a more homogeneous blend. ULTRA-PLAST™ WF101 works as an excellent lubricant under high shear conditions, for example injection molding.

McLube® 1700L is a PTFE dispersion with binding additives offering semi-permanent, non-transferring release characteristics. Ideal for injection molding. Silicone-free. Also, an excellent dry lubricant.

Polytrans MAGNESIUM STEARATE is a magnesium salt.

Taiwan Colors & Chemicals Zinc Stearate (Zn-ST) has good lubricity, non-toxic stability, non-sulfur staining and its initial color is very little.

ChemPlasa Materials L-101G is Ethylene Bis Oleamide which used as a functional additive in plastics manufacturing.

Booster EPM is a reactive polymer blend, which is polyolefin and elastomeric in nature. It depends on hydrogen abstraction followed by a controlled reaction of available free radicals. It is capable of alloying with a wide variety of thermoplastics and elastomers and it can stabilize a complex mixed polymer system, both polar and non-polar. It consists of several components and its reactivity is partly activated in the production process.

Ease Release® 700 is a general purpose release agent. Ease Release® 700 is designed to release polystyrene, polyethylene, wax, synthetic rubber, acrylics, phenolic, melamine and metal castings from aluminum, chrome, epoxy, polyester, rubber, and steel molds. Ease Release® 700 is also effective as a surface lubricant for assembling plastic and rubber components.

ULTRA-PLAST™ TP01 contains reactive sites which create hydrogen bonding and can therefore act as coupling agent between polymer and filler. It acts as an efficient blending and dispersing agent in highly filled plastics compounds, leading to a more homogeneous initial mix. At processing conditions, ULTRA-PLAST™ TPO1 is an effective lubricant for polyolefins like PVC, PS, ABS and several TPO systems. Applications recommended for ULTRA-PLAST™ TPO1 include highly filled TPE and TPO compounds, filled olefins, flame retarded systems and color concentrates. In addition, it can be used in unfilled elastomers where reduced viscosity and improved flow under processing conditions are desired. In many cases, better surface appearance and more uniform mold shrinkage can be observed.

SAK- LiS by Sun Ace is a lithium stearate. Acts as an acid scavenger, lubricant, mold release agent, extender and water repellent agent. SAK- LiS contains vegetable-based fatty acid and metal. Exhibits excellent lubricating and dispersing properties and stabilizing, hydrophobic and foam inhibiting effects. Used in plastics and rubber.

AO 1024 possesses the double structures of hindered phenol and acyl，and afunction of anti‐oxidation and metal deactivation. This product is a kind of metal deactivator, can be used either independently or together with antioxidant. It is applicable to polyethylene, polypropylene, polystyrene, polyamide, polyester, and especially to the antioxidant used in phenolic resin. It is effectively preventing the polymeric substance from self‐oxidation caused by transition metal ion (the remains of the catalyst). More efficient if it is added to the polymeric substance used in insulated electric wire and cable .The perfect melting nature makes it easily to mix withand into the substance mentioned above and other polymeric substance system without any dispersing problem. The general dosage is of 0.1‐0.5 share.

Diene™35AC10 is a solution polymerized plastics grade medium cis polybutadiene, featuring excellent color and low gel. It is low in solution viscosity and contains a non-volatile antioxidant system. Diene™35AC10 is widely used as an impact modifier for thermoplastic resins such as HIPS and ABS.

Shandong Yuanli Science and Technology Dioctyl Adipate(DOA) is a typical cold resistant plasticizer of polyvinyl chloride, vinyl chloride copolymers, polystyrene, cellulose nitrate, ethyl cellulose and synthetic rubber.High plasticized efficiency. Products can be given to low-temperature flexibility and good lightfastness.Used with the DOP,DBP plasticizer for cold agricultural film, frozen food packaging film,wire and cable coating, leather, sheet metal and outdoor used etc.

SUNOX® 1076 is a sterically hindered phenolic antioxidant, is highly efficient, nondiscoloring stabilizer for organic substrates such as plastics, synthetic fibers, elastomers, adhesives, waxes, oilsand fats. It protects these substrates against thermo-oxidative degradation.

SAK- LZS by Sun Ace is a liquid zinc stearate. Acts as an acid scavenger, lubricant, mold release agent, extender and water repellent agent. SAK- LZS contains vegetable-based fatty acid and metal. Exhibits excellent lubricating and dispersing properties and stabilizing, hydrophobic and foam inhibiting effects. Compatible with thermoplastics. Used in plastics and rubber.

Diene™55AC10 is a solution polymerized plastics grade medium cis polybutadiene, featuring excellent color and low gel. It is intermediate in solution viscosity and contains a non-volatile antioxidant system. Diene™55AC10 is widely used as an impact modifier for thermoplastic resins such as HIPS and ABS.

Diene™55AC15 is a solution polymerized plastics grade medium cis polybutadiene, featuring excellent color and low gel. It is intermediate in solution viscosity and contains a non-volatile and TNPP-free antioxidant system. Diene™ 55AC15 is widely used as an impact modifier for thermoplastic resins such as HIPS and ABS.

SAK- MS by Sun Ace is a magnesium stearate. Acts as an acid scavenger, lubricant, mold release agent, extender and water repellent agent. SAK-MS contains vegetable-based fatty acid and metal. Exhibits excellent lubricating and dispersing properties and stabilizing, hydrophobic and foam inhibiting effects. Compatible with thermoplastics. Used in plastics and rubber.

Golden Dragon Chemicals CPE 135 is chloridized by HDPE .Due to the molecule of CPE does not contain double bond, it has excellent weatherability, anti-flaming and wide application. It is mainly used as PVC impact modifier.

ChemPlasa Materials L-202P is Ethylene Bis Stearamide which used as a functional additive in plastics manufacturing.

Gchemical Company GPRC-2730 is an antifoam defoamers used in elastomers, latex, PS, ABS. It acts as a blend for water and silica.

TR 041 - A nonionic, ester-based wetting agent for polar fillers and pigments used for improved dispersion and metal release. Contains no metal ions.

Varteco Quimica Puntana KALFLEX-PP is a Propyleneglycol Polyadipate High resilience to the extraction of PVC compounds through oils, hydrocarbons and soapy water, etc. is the main feature of polymeric plasticizers. The low volatility promotes less plasticizer loss during the process, higher stability of the mechanic properties of the compound (very slow aging and fog elimination in automobiles) and less odor of the end product. Low migration is another advantage of polimeric plasticizers. As a result, they can be used in compounds in contact with adhesives, rubbers, polystyrenes, etc.

North Wanxing Chemical Co., Ltd. Dimethyl Sebacate is a colorless and transparent oil, is compatible with benzyl cellulose, cellulose aclate, cellulose acetobutyrate, cellulose acetopropionate, chlorinated rubber, ethyl cellulose, polystyrene, polyvinyl butyral and vinyl plasticizer, softening agent and solvent for cellulose resin, polyethylene resin and synthetic rubber.

MoldWiz® INT-34DLK - Process aid additive which is incorporated directly into the resin. Improves resin flow/fill, improves dispersion of other resin additives (reinforcements, fillers, and pigments), shortens cycle times, reduces temperatures and pressures of molding machines, and reduces or eliminates weld/knit lines. Eliminates the need for an external mold release agent. An effective addition of process aid additive will not have any adverse effect on physical properties or secondary operations such as decorating, printing, bonding, or plating