Products in Performance Additives: Automotive Interior Parts

Paychlor S-68 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Paychlor D-62 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Paychlor S-45 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Stoner, Inc. E218 Extra Heavy Duty Silicone Mold Release is specially formulated as a release agent and anti-stick lubricant for molded materials such as plastics, rubber, waxes, and similar materials. Even the most stubborn, sticking parts release faster and easier with E218, our heaviest viscosity mold release.

SD Korea SBP-15 NSW coupling Agents are chemically modified compatibilizer with MA, maleic anhydride which is organic chemicals as active functional component. Its function helps increasing compatibility when co-mixing and co-extruding with non-compatible plastic resin. Finally homogeneous material is produced by SBP coupling agent. It is called compatibilizer or coupling agent and in some case it is called bonding agent.

Paychlor D-42 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Paychlor S-52 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Paychlor D-58 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Jai Vardhman Khaniz Talc SP 10 is highly pure, laminar talc for plastic and rubber enhances the performance of compounds such as polypropylene (PP). Talc is not only used in automotive plastics and household appliances, but also in food packaging such as acid-resistant fresh food packs and garden furniture. This very wide range of applications is due to the constant innovation in its usability as talc acts as a cheaper, advantageous and environment friendly filler mineral.

SD Korea SBP-20 NS coupling Agents are chemically modified compatibilizer with MA, maleic anhydride which is organic chemicals as active functional component. Its function helps increasing compatibility when co-mixing and co-extruding with non-compatible plastic resin. Finally homogeneous material is produced by SBP coupling agent. It is called compatibilizer or coupling agent and in some case it is called bonding agent.

Paychlor K-45 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Jai Vardhman Khaniz Talc JT 10 is highly pure, laminar talc for plastic and rubber enhances the performance of compounds such as polypropylene (PP). Talc is not only used in automotive plastics and household appliances, but also in food packaging such as acid-resistant fresh food packs and garden furniture. This very wide range of applications is due to the constant innovation in its usability as talc acts as a cheaper, advantageous and environment friendly filler mineral.

Paychlor D-52 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Dalian Lonsin New Materials LS1608AH is fischer tropsch wax.

Stoner, Inc. E204 Light Duty Silicone Release - FG is specially formulated as a release agent and anti-stick lubricant for molded materials such as plastics, rubber, waxes, and similar materials. It produces a very light, dry mist coating which reduces over-application and buildup on molds.

SUNOX® 1076 is a sterically hindered phenolic antioxidant, is highly efficient, nondiscoloring stabilizer for organic substrates such as plastics, synthetic fibers, elastomers, adhesives, waxes, oilsand fats. It protects these substrates against thermo-oxidative degradation.

Paychlor S-62 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Paychlor D-55 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

TKC Kunststoffe E.K. Scona Tppp 8112 GA is an adhesion modifier for TPE-S overmolding compounds and coupler for natural fiber compounds in polypropylene.

Stoner, Inc. E236 Urethane Mold Release is specially formulated as a release agent and anti-stick lubricant for molded urethanes. A light coating produces best results.

Paychlor K-40 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Elafleks® DINP (Diisononyl Phthalate) is used as a softener in all PVC paste and pulp mixtures. Used in all calendaring systems, automotive sector, cable production, synthetic leather production, bookbinding fabric production, PVC and Floor Covering production.

Stoner, Inc. E206 Silicone Mold Release is specially formulated as a release agent and anti-stick lubricant for molded materials such as plastics, rubber, waxes, and similar materials. It is our most popular mold release because of its versatility and high performance.

SUNOX® 168 is a secondary high performance phosphite antioxidant for organic polymers. Exhibits reduction in polymer degradation during processing. Provides improved gas fading performance in many applications. Imparts higher phosphorous content than competitive phosphite antioxidants.

Paychlor D-40 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Paychlor K-62 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Irubond 700 is a compatibilizer, coupling agent in polyethylene system.

Paychlor D-45 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Stoner, Inc. A373 Fluoroelastomer Mold Release Fluoroelastomer Mold Release is a semi-permanent, fast curing release for fluorels, vitons and other fluorocarbons. It provides a permanent yet removable, thin-layer, anti-stick mold surface coating for fast, easy part removal from molds.

Paychlor S-58 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Stoner, Inc.E202 Dry Mist Silicone Release - FG is specially formulated as a release agent and anti-stick lubricant for molded materials such as plastics, rubber, waxes, and similar materials. Produces a very light, dry mist coating which reduces over-application and buildup on molds. It's ideal when minimal release agent is required.

Jai Vardhman Khaniz Talc JT 20 is highly pure, laminar talc for plastic and rubber enhances the performance of compounds such as polypropylene (PP). Talc is not only used in automotive plastics and household appliances, but also in food packaging such as acid-resistant fresh food packs and garden furniture. This very wide range of applications is due to the constant innovation in its usability as talc acts as a cheaper, advantageous and environment friendly filler mineral.

Stoner, Inc. A353 Endurance Mold Release is a semi-permanent, fast curing release for all elastomers including EPDM, nitrile, and neoprene. It provides a thin, anti-stick mold surface coating for fast, easy part removal from molds.

uDiamond® materials bring diamond performance to industrial applications. Diamond possesses extreme material properties including hardness and thermal conductivity. It is also electrically non-conductive and virtually transparent when incorporated in other materials. Our nanodiamond materials have specific surface functionalization and dispersion properties for use as a modifier in countless other materials. Selecting the correct uDiamond® material(s) will depend on your application, and we always recommend contacting us to discuss your requirements.

Dalian Lonsin New Materials LS1608HY is fischer tropsch wax.

SUNOX® 1010 - a sterically hindered phenolic antioxidant-is a highly effective, non discolor- ing stabilizer for organic substrates such as plastics, synthetic fibers, elastomers, adhesives, waxes, oils and fats. It protects these substrates against thermo-oxidative degradation.