Products in Specialty Elastomers: Extrusion

Apcoflex® P615C is a medium acrylonitrile, medium Mooney Viscosity linear rubber in powdered form

Paracril AJLTM50 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

NuSil™ MED-4565 is a high consistency silicone elastomer.

NuSil™ MED-2045 is a high consistency silicone elastomer.

NuSil™ MED-4735 is a high consistency silicone elastomer.

NuSil™ MED-4150 is a high consistency silicone elastomer.

NuSil™ MED-4055 is a uhp high consistency silicone elastomer.

Silplus™ 80 HS is a heat cured elastomer with very good mechanical and processing properties. Silplus™ 80 HS when properly compounded and catalyzed can be considered for use in a wide variety of applications such as extrusion, molding and calendaring.Key Features and Benefits excellent mechanical properties, in particular, high tear strength compounding simplicity good dielectric properties enhanced heat resistance versatile Potential ApplicationsBecause of its outstanding proerties, Silplus™ 80 HS heat cured silicone is an excellent candidate to consider for use in most types of molding, extrusion and calendaring applications.

Tufel™ II 94706 are 40-70 durometer low volatile fast-cure addition cured silicone elastomers for extrusion and calendering. They may be used by themselves or blended to intermediate durometers. Applications include extruded tubings, profiles and calendered sheets.Key Features and Benefits LV Bases Minimize Porosity and Post Cure Totally Peroxide-Free Cure System Broad Processing Window High Output Rates High Tear Strength Tight Surface Cure Non-blooming Translucency.

Tufel™ III rubber series are biocompatible(1), two component silicone rubber compounds. 92506 and 92656 are 50 and 65 durometer addition curable silicone elastomers that offer low compression set and high resilience with no post bake required for most applications. The combination of these properties may lead to longer service life in highly mechanical applications. The 92506 and 92656 elastomers can be used to produce extruded and calendered parts with excellent permanent set resistance and should be considered for applications such as peristaltic pump tubing, gaskets and seals.Key Features and Benefits Low compression set Excellent elastic memory Biocompatible(1) No post baking required for most applications Low volatile bases minimize porosity Peroxide-free cure system Broad processing window High output rates Tight surface cure Non-blooming Translucency Low hysteresis Potential Applications Healthcare Consumer Goods General Industrial.

Polsil® GUM 100/30 is general purpose heat cured elastomer widely used for molding and extrusion in various industries.

Apcoflex® N749 is a cold polymerized, medium ACN containing acrylonitrile butadiene co-polymer, It contains non-staining antioxidant.

Silplus™ 60 MP is a heat cured elastomer with outstanding processing capability. Silplus™ 60 MP heat cured elastomer when properly compounded and catalyzed may be considered for use in a wide variety of applications such as extrusion, molding and calendaring.Key Features and Benefits compounding simplicity good extrudability high mechanical properties good green strength easily blendable versatile Potential ApplicationsBecause of its outstanding properties, Silplus™ 60 MP heat cured elastomer is an excellent candidate for most types of molding, extrusion and calendaring applications.

Apcoflex® N684 is a cold polymerized, medium ACN containing acrylonitrile butadiene co-polymer. It contains non-staining antioxidant.

Silplus™ 60 HS is a heat cured elastomer with very good mechanical and processing properties. Silplus™ 60 HS when properly compounded and catalyzed can be considered for use in a wide variety of applications such as extrusion, molding and calendaring.Key Features and Benefits excellent mechanical properties, in particular, high tear strength compounding simplicity good dielectric properties enhanced heat resistance versatile Potential ApplicationsBecause of its outstanding properties, Silplus™ 60 HS heat cured silicone is an excellent candidate to consider for use in most types of molding, extrusion and calendaring applications.

NuSil™ MED-4755 is a high consistency silicone elastomer.

Polsil® GUM 216/75 is a special grade heat cured elastomer with higher thermal resistance for manufacturing silicone-insulated safety (ceramifying) cables.

NuSil™ MED-4550 is a high consistency silicone elastomer.

NuSil™ MED-4080 is a high consistency silicone elastomer.

NuSil™ MED-4725 is a high consistency silicone elastomer.

Paracril P3380XL is a copolymer of butadiene and acrylonitrile, highly cross linked. It is stabilized with a non-staining and non-discoloring stabilizer.

NuSil™ MED-4174 is a silicone elastomer.

Paracril X3675 is a copolymer of butadiene and acrylonitrile, hot polymerized with a non-discoloring staining stabilizer.

Paracril ALT is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

Paracril P3260XL is a copolymer of butadiene and acrylonitrile, with medium-high crosslinking level. It is stabilized with a no-staining and non-discoloring stabilizer.

Paracril AJLT is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

Paracril P3255XL is a copolymer of butadiene and acrylonitrile, partially cross linked. It is stabilized with a non-staining and non-discoloring stabilizer.

Nancar® NBR 1052M43 is a medium high acrylonitrile butadiene copolymer with good oil resistance. It is a low Mooney version of NANCAR 1052. The low Mooney provides optimum processing property in highly filled or reinforced compounds..

Polsil® GUM 100/60 is general purpose heat cured elastomer widely used for molding and extrusion in various industries.

NuSil™ MED-4165 is a high consistency silicone elastomer.

Polsil® GUM 100/50 is general purpose heat cured elastomer widely used for molding and extrusion in various industries.

Silplus™ 40 MP is a heat cured elastomer with outstanding processing capability. Silplus™ 40 MP heat cured elastomer when properly compounded and catalyzed may be considered for use in a wide variety of applications such as extrusion, molding and calendaring.Key Features and Benefits compounding simplicity good extrudability high mechanical properties good green strength easily blendable versatile Potential ApplicationsBecause of its outstanding properties, Silplus™ 40 MP heat cured elastomer is an excellent candidate to consider for use in most types of molding, extrusion and calendaring applications.

Polsil® GUM 100/70 is general purpose heat cured elastomer widely used for molding and extrusion in various industries.

Polsil® GUM 214/70 is a special grade heat cured elastomer designed for flame-retardant applications.

Apcoflex® N746 is a cold polymerized, medium ACN containing acrylonitrile butadiene co-polymer, It contains non-staining antioxidant.

Tufel™ II 94206 and 93306 are 20 and 30 Silicone Rubber Compounds durometer low volatile fast-cure addition cured silicone elastomers for extrusion and calendering. They may be used by themselves or blended to intermediate durometers. Applications include extruded tubings, profiles and calendered sheets.Key Features and Benefits LV Bases Minimize Porosity and Post Cure Totally Peroxide-Free Cure System Broad Processing Window High Output Rates High Tear Strength Tight Surface Cure Non-blooming Translucency.