Products in Specialty Elastomers: Injection Molding

General purpose silicone compounds are suitable for customers that need the technical advantage and good performance of silicone without the need of special formulation. General purpose silicone compounds can be used for extrusion, compression molding, injection molding and calendered applications. Regularly a post cure is recommended to enhance physical properties. Colors will match your requirement.

DAI-EL G-684BP, processed through injection molding, showcases a good compression set, an odorless nature, chemical resistance, and moldability. Catering to automotive and industrial applications, it serves fuel lines, hoses, and O rings. This solid white-colored product is soluble in lower ketones and esters.

NBR 3375 NT is essentially an acrylonitrile (31-35%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. Medium content of acrylonitrile, heightened oil resistance.

NBR 3355 NT is essentially an acrylonitrile (31-35%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. Medium content of acrylonitrile, heightened oil resistance.

DAI-EL G-7401, available in solid form, exhibits scorch resistance, a good compression set, fluidity, and is odorless. Tailored for automotive and industrial applications, it finds use in fuel entrance cover seals and O rings. Soluble in lower ketones and esters, this product utilizes injection molding processing methods.

DAI-EL G-704, available in solid form, features good fluidity and is odorless. Targeting automotive and industrial applications, it excels in powertrain and equipment parts. With heat cure as its preferred method, this product is soluble in lower ketones and esters, ensuring reliable performance in components like fuel entrance cover seals and O rings.

DAI-EL G-310MBP, available in solid form, undergoes transfer molding, compression molding, and injection molding processes. Boasting a good compression set and an odorless profile, it is soluble in lower ketones and esters. Targeting automotive and transportation markets, it finds applications in fuel entrance cover seals and O rings.

DAI-EL G-7211, processed through injection molding, features scorch resistance, a good compression set, fluidity, and is odorless. Tailored for automotive and industrial applications, it caters to fuel entrance cover seals and O rings. Soluble in lower ketones and esters, this solid white-colored product aligns with clean standards.

Millathane® 5004M (Premilled) is a peroxide-curable millable polyurethane rubber used for production of parts for many applications including seals, gaskets, rollers, and diaphragms.

NBR 2645 NT is essentially an acrylonitrile (27-30%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. Medium content of acrylonitrile, heightened oil resistance.

NuSil™ MED-4815 is a NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days).Liquid silicone rubbers, or LSRs, are elastomer systems reinforced with silica. They contain functional polymers of lower average molecular weight and viscosity when compared to high consistency rubbers (HCRs). They are typically supplied as two-component systems and formulated in a 1:1 mix ratio. Because their consistency is akin to petroleum jelly, they are often pumped with injection molding equipment to form molded components such as o-rings, gaskets, valves, seals, and other precision molded parts.LSRs are designed for liquid injection molding (LIM) processes which may utilize single or multi-cavity molds, or for overmolding processes. Originally designed for automated systems, they are developed with high volume applications in mind and benefit from their high strength.Comments: INJECTION MOLDING ELASTOMER.

LIM™ 6040 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive Performance Materials masterbatch colors.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 1500C (3020F) to 2050C (4000F) Excellent release from metal molds Potential ApplicationsThe combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.

66% Fluorine copolymers formulated for molding complex geometric shapes. GP compounds exhibit improved hot tear resistant properties and offer a variety of colors.

Apcoflex® P3380 4C is a medium Acrylonitrile, high Mooney Viscosity cross-linked rubber in powdered form. It is partitioned with Calcium Carbonate.

LIM™ 6045 by Momentive Performance Materials is comprised of Liquid Silicone Rubber. It is commonly used as Molding Resin for a variety of applications. It is available in Liquid form.

Silopren™ LSR 2030 is a two-component liquid silicone rubber for injection molding processes. Because of its excellent processing properties, it can be considered for use in a wide range of applications.Key Features and BenefitsVulcanizates consisting of Silopren™ LSR 2030 typically are distinguished by the following properties: High thermal stability Excellent stability and flexibility at low temperatures Excellent biocompatibility Sterilizable with ethylene oxide, steam and gamma radiation Good rubber-like properties Long service life at dynamic stress High stability to ozone and ultraviolet light Outstanding resistance to aging Excellent dielectric behavior over a wide range of temperatures Not readily combustible, does not melt or drip Easily-pigmentable with LSR Color Pastes Potential ApplicationsBecause of its outstanding properties, Silopren™ LSR 2030 is an excellent candidate to consider for use in the following elastomeric articles: Sealing elements O-rings Stoppers Cable accessories.

LIM™ 6010 liquid silicone rubber is a two-component product formulated for use in liquid injection molding to produce elastomeric parts where low-durometer is a key requirement. LIM6010 elastomer is clear, but easily pigmentable with Momentive masterbatch colors. The combination of low-durometer and non-tackiness allows the product to be used in such consumer goods applications as corn pads and heel inserts, where 'soft touch' sensory characteristics are important. LIM6010 elastomer offers a convenient 1:1 mix ratio and releases easily from molds. Cure time is rapid, generally 10 to 40 seconds at 150°C (302°F) - 204°C (400°F), depending on part size, configuration, and molding temperature.Key Features and Benefits Low-Durometer Non-Tackiness Sensory Characteristics (Added Cushioning) Rapid molding cycle times - > 20-60 seconds Convenient 1:1 Mix Ratio Outstanding Thermal Cycling Performance Potential ApplicationsThe combination of low-durometer and non-tackiness allows the product to be used in such consumer goods applications, where 'soft touch' sensory characteristics are important. Corn Pads Heel Inserts.

Silopren™ LSR 2730 by Momentive Performance Materials is commonly used as Molding Resin for a variety of applications.

NuSil™ MED-4880 is a liquid silicone rubber.

Chengdu Dowhon Industry FD-351C is Low compression set,excellent mold flow and release.

Silopren™ LSR 2752 is a two-component, selfbonding liquid silicone rubber for injection molding processes showing primerless adhesion to a wide range of substrates (e.g. engineering plastics, metals) without adhesion to the mold during manufacturing.Key Features and Benefits primerless adhesion to many substrates without necessity of any special mold treatment high thermal stability excellent stability and flexibility at low temperatures long service life at dynamic stress good rubber-like properties high stability to ozone and ultraviolet light outstanding resistance to aging excellent dielectric behavior over a wide range of temperatures not readily combustible, does not melt or drip easy-pigmentable with LSR Color Pastes Potential ApplicationsDue to the selfbonding properties Silopren™LSR 2752 is the optimal choice for the production of multi component articles in a cost efficient integrated process (multi component injection molding, overmoulding). Because of the outstanding properties Silopren™LSR 2752 is particularly suitable for the manufacturing of soft/rigid combinations out of engineering plastics and Silopren™ LSR e.g. sealing elements, membranes, shower heads or wherever a gasket is needed on a thermoplastic substrate.

Silopren™ LSR 2660 ZKS by Momentive Performance Materials is comprised of Silicone Elastomer. It is commonly used as Molding Resin for a variety of applications. It is available in Liquid form.

NuSil™ MED-4830 is a liquid silicone rubber.

LIM™ 6030 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM 6030 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds Potential Applications sports goggles and masks health care equipment camera parts coating metal rolls.

Silopren™ Matrix 70 and 80 two-component liquid silicone rubber for injection molding processes contain polymeric fibers, which help reinforce molded articles while maintaining LSR's excellent processing properties.Key Features and Typical BenefitsVulcanizates consisting of Silopren™ Matrix LSR are distinguished by the following properties: High thermal stability Excellent stability and flexibility at low temperatures Good rubber-like properties High modulus High stability to ozone and ultraviolet light Outstanding resistance to aging Excellent dielectric behavior over a wide range of temperatures Not readily combustible, does not melt or drip Easily pigmentable with LSR color pastes Potential ApplicationsBecause of its outstanding properties, Silopren™ Matrix LSR is an excellent candidate to consider for use in the following elastomeric articles: Membranes Pressure hoses Exhaust hangers Watchbands Belts.

LightSpan® LS-6946 is a optical thermoset.

Apcoflex® P3880 4C is a high acrylonitrile, high Mooney Viscosity, cross-linked rubber in powdered form. It is partitioned with Calcium Carbonate.

Silopren™ LSR 3786/20 is a two-component liquid silicone rubber for injection molding processes. This material is an excellent candidate to consider for the manufacture of elastomeric articles requiring self-lubricating properties. The self-lubricating effect is achieved by a fluid which exudes out of the vulcanizate over an extended period of time. It starts typically between a few hours and one day after vulcanization. Silopren™ LSR 3786/20 liquid silicone rubber shows a low compression set after vulcanization without post-curing.Key Features and BenefitsVulcanizates consisting of Silopren™ LSR 3786/20 liquid silicone rubber are typically distinguished by the following properties: low compression set without post-cure self-lubricating properties low viscosity fast cure high thermal stability outstanding resistance to aging easy to color Potential ApplicationsBecause of the outstanding properties, Silopren™ LSR 3786/20 liquid silicone rubber is an excellent candidate to consider for use in wire harness applications for the following elastomeric articles: cable seals mat seals grommets gaskets plug seals.

66% Fluorine copolymers formulated for molding complex geometric shapes. GP compounds exhibit improved hot tear resistant properties and offer a variety of colors.

Wynca XHG-6310 is a two-component liquid silicone rubber for injection molding or casting processes. It can be handled with high efficiency, no flash and low energy requirement. The rubber articles made with XHG-6310 is of high physical properties, high durability and good dielectric property.

NuSil™ MED-2955 is a NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days).Liquid silicone rubbers, or LSRs, are elastomer systems reinforced with silica. They contain functional polymers of lower average molecular weight and viscosity when compared to high consistency rubbers (HCRs). They are typically supplied as two-component systems and formulated in a 1:1 mix ratio. Because their consistency is akin to petroleum jelly, they are often pumped with injection molding equipment to form molded components such as o-rings, gaskets, valves, seals, and other precision molded parts.LSRs are designed for liquid injection molding (LIM) processes which may utilize single or multi-cavity molds, or for overmolding processes. Originally designed for automated systems, they are developed with high volume applications in mind and benefit from their high strength.

Chengdu Dowhon Industry FD-451C is High tensile,low compression set,excellent mold release.

66% Fluorine copolymers formulated for injection molding. GP-LV compounds also exhibit the improved hot tear resistance of their higher viscosity counterparts.

66% Fluorine copolymers formulated for low cost. LC-LV compounds are also injection moldable.

Apcoflex® P615C is a medium acrylonitrile, medium Mooney Viscosity linear rubber in powdered form

LightSpan® LS-6941 is a optical thermoset.