Advanced Composites ADX-5023 is a mineral-filled thermoplastic olefin compound that is designed to provide an excellent balance of stiffness and impact resistance. It is suitable for use in mold-in-color interior applications and has several desirable properties, including high stiffness, high impact resistance, UV stability, scratch resistance, and ductility at cold temperatures.

Advanced Composites ADX-5017 is a talc-filled, impact-modified polypropylene compound that is recommended for use in injection molding. It is in the form of white, opaque, solid plastic pellets that have a diameter of approximately 3mm to 10mm and a slight to no odor.

Kraton FG1901 G is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. FG1901 GT - supplied as a dusted pellet Kraton FG1901 G is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.

Kraton G1726 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton G1726 MS - is supplied as a dusted, dense pellet. Kraton G1726 M is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.

Kraton G1701 M is a clear, linear diblock copolymer based on styrene and ethylene/propylene with a polystyrene content of 37%. It is supplied from North America in the physical form identified below. Kraton G1701 MU - supplied as a powder. Kraton G1701 M is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.

SERIES 25 SPECIAL ESTERProducts based on special grade saturated polyester. The features are similar to those of Series 20 but are characterized by a higher resistance to hydrolysis failure and improved flexibility at low temperatures.

Kraton G4609 H is a white mineral oil extended linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 33%. Nominal oil content of the polymer is 45.5%w (90 parts/100 parts rubber (phr)). It is supplied from North America iin the physical form identified below. Kraton G4609 HI - supplied as a dusted powder Kraton G4609 H is used as a base material for themoplastic elastomer (TPE) compound formulations for a variety of applications. It is also used as a modifier of thermoplastics and bitumen. The inherent stability of SEBS polymers suggests the use of G4609 H in applications that must withstand weathering and high processing temperatures.

Kraton G1651 H is used as a base material for themoplastic elastomer (TPE) compound formulations for a variety of applications. It is also used as a modifier of thermoplastics and bitumen. The inherent stability of SEBS polymers suggests the use of G1651 H in applications that must withstand weathering and high processing temperatures. Kraton G1651 HU - supplied as an undusted powder/fluffy crumb Kraton G1651 HS - supplied as a dusted powder/fluffy crumb Kraton G1651 HF - supplied as a dusted powder Kraton G1651 H is a clear, linear copolymer based on styrene and ethylene/butylene with a polystyrene content of 33%. It is supplied from North America in the physical form identified below.

Kraton D4150 K is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied from North America in the physical form identified below. Kraton D4150 KT - supplied as a dusted porous pellet Kraton D4150 KU - supplied as an undusted porous pellet Kraton D4150 K is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications, molded and extruded goods applications and may be used in formulating adhesives, sealants, and coatings.