Products in Thermoplastic Elastomers: Appliances

451 Products found in Thermoplastic Elastomers

Browse Applications

LNP™ LUBRICOMP™ Compound YP003 banner

SABIC's Specialties BusinessLNP™ LUBRICOMP™ Compound YP003

Polymer Name:Thermoplastic Polyester Elastomer
Processing Methods:Injection Molding
End Uses:Recreational Vehicle Components, Electronic Components, Containers, Displays, Computer Components, Tarpaulins, Pool Covers, Sporting Goods, Turf Applications, Air Cabin Interior, Windows, Appliances, Consumer Applications, Electrical Components, Commercial Appliance, Aerospace Applications, Air Conditioner, Personal Accessories, Cell Phones, Tablets, Garden Equipment, Electrical/Electronic Applications, Lawn Equipment, Building Materials, Home Appliances, Doors
Density:1270.0 - 1270.0 kg/m³
Flexural Modulus:260.0 - 260.0 MPa

LNP LUBRICOMP YP003 compound is based on Polyester Elastomer resin containing 15% PTFE/silicone. Added features of this grade include: Wear Resistant.

Espolex® 3255 banner

Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLCEspolex® 3255

Polymer Name:Thermoplastic Polyolefin (TPO)
Processing Methods:Injection Molding
Features:Good Surface Appearance, Good Adhesion, Light Weight, Cost Effective, Pigmentable, Low Density, Heat Resistance, Good Colorability, High Performance, Consistent High Quality, High Elasticity
Density:890.0 - 890.0 kg/m³

Espolex® 3255 is a TPV known for its excellent colorability and appearance. It forms strong bonds with polypropylene compounds and polyethylene, while exhibiting thermoplastic processing characteristics combined with rubber-like properties. It is particularly well-suited for two-shot molding. Its applications include: Handle grips Gaskets Active spoilers Appliances Automotive exterior trim Automotive interior trim Boats Jet-propelled vehicles Mud flaps Weatherstripping Over-molding Injection molded parts Features: Excellent flowability Great surface appearance for styling Easy bonding with other materials Benefits: Anti-slip properties Noise reduction

Espolex® CPD-450 banner

Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLCEspolex® CPD-450

Polymer Name:Thermoplastic Polyolefin (TPO)
Processing Methods:Injection Molding
Features:Pigmentable, Flexible, Good Colorability, High Performance, Consistent High Quality, High Elasticity, Light Weight
Density:930.0 - 930.0 kg/m³

Espolex® CPD-450 is a Thermoplastic Elastomer which processes like a thermoplastic and acts like a rubber with excellent flowability. Good balance of stiffness and durometer. Applications: Bin and Floor Mats Appliances Automotive Exterior Trim Automotive Interior Trim Boat Jet-Propelled Vehicle Mud Flaps Weatherstripping Over-molding Injection Molded Parts Features: Heat Stabilized Black High Melt Flow Benefits: Anti slip Noise reduction

LNP™ COLORCOMP™ Compound 9X99415 banner

SABIC's Specialties BusinessLNP™ COLORCOMP™ Compound 9X99415

Polymer Name:Thermoplastic Polyester Elastomer
Processing Methods:Injection Molding
End Uses:Commercial Appliance, Displays, Surgical Devices, Personal Accessories, Home Appliances, Cell Phones, Tablets, Electrical/Electronic Applications, Automotive Applications, Sporting Goods, Containers, Consumer Applications, Appliances, Automotive Interior Parts, Computer Components
Density:1010.0 - 1010.0 kg/m³
Strain at Break:50.0 - 50.0 %

SABIC's Specialties Business LNP COLORCOMP 9X99415 compound is based on Polyether Block Amide resin. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

LNP™ LUBRICOMP™ Compound YL003 banner

SABIC's Specialties BusinessLNP™ LUBRICOMP™ Compound YL003

Polymer Name:Thermoplastic Polyester Elastomer
Processing Methods:Injection Molding
End Uses:Containers, Consumer Applications, Appliances, Windows, Doors, Tarpaulins, Computer Components, Garden Equipment, Commercial Appliance, Turf Applications, Electrical Components, Pool Covers, Displays, Personal Accessories, Home Appliances, Cell Phones, Tablets, Electrical/Electronic Applications, Building Materials, Lawn Equipment, Sporting Goods
Density:1270.0 - 1270.0 kg/m³
Flexural Modulus:220.0 - 220.0 MPa

LNP LUBRICOMP YL003 compound is based on Polyester Elastomer resin containing 15% PTFE. Added features of this grade include: Wear Resistant.

LNP™ THERMOCOMP™ Compound YF005 banner

SABIC's Specialties BusinessLNP™ THERMOCOMP™ Compound YF005

Polymer Name:Thermoplastic Polyester Elastomer
Processing Methods:Injection Molding
End Uses:Tarpaulins, Computer Components, Garden Equipment, Commercial Appliance, Turf Applications, Electrical Components, Pool Covers, Displays, Personal Accessories, Home Appliances, Cell Phones, Tablets, Food Preparation Equipment, Electrical/Electronic Applications, Building Materials, Lawn Equipment, Sporting Goods, Containers, Consumer Applications, Appliances
Density:1400.0 - 1400.0 kg/m³
Strain at Break:10.3 - 10.3 %
Flexural Modulus:2120.0 - 2120.0 MPa

SABIC's Specialties Business LNP THERMOCOMP YF005 compound is based on Thermoplastic Polyester Elastomer (TPE) resin containing 25% glass fiber. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

LNP™ THERMOCOMP™ Compound YF003S banner

SABIC's Specialties BusinessLNP™ THERMOCOMP™ Compound YF003S

Polymer Name:Thermoplastic Polyester Elastomer
Processing Methods:Injection Molding
End Uses:Tarpaulins, Computer Components, Garden Equipment, Commercial Appliance, Turf Applications, Electrical Components, Pool Covers, Displays, Personal Accessories, Home Appliances, Cell Phones, Tablets, Food Preparation Equipment, Electrical/Electronic Applications, Building Materials, Lawn Equipment, Sporting Goods, Containers, Consumer Applications, Appliances
Density:1300.0 - 1300.0 kg/m³
Flexural Modulus:1200.0 - 1200.0 MPa

SABIC's Specialties Business LNP THERMOCOMP YF003S compound is based on Thermoplastic Polyester Elastomer (TPE) resin containing 15% glass fiber. Added features of this grade include: Heat Stabilized. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

LNP™ THERMOCOMP™ Compound YF006A banner

SABIC's Specialties BusinessLNP™ THERMOCOMP™ Compound YF006A

Polymer Name:Thermoplastic Polyester Elastomer
Processing Methods:Injection Molding
End Uses:Tarpaulins, Computer Components, Garden Equipment, Commercial Appliance, Turf Applications, Electrical Components, Pool Covers, Displays, Personal Accessories, Home Appliances, Cell Phones, Tablets, Food Preparation Equipment, Electrical/Electronic Applications, Building Materials, Lawn Equipment, Sporting Goods, Containers, Consumer Applications, Appliances
Density:1430.0 - 1430.0 kg/m³
Flexural Modulus:2900.0 - 2900.0 MPa

SABIC's Specialties Business LNP THERMOCOMP YF006A compound is based on Thermoplastic Polyester Elastomer (TPE) resin containing 30% glass fiber. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

LNP™ THERMOCOMP™ Compound YF004 banner

SABIC's Specialties BusinessLNP™ THERMOCOMP™ Compound YF004

Polymer Name:Thermoplastic Polyester Elastomer
Processing Methods:Injection Molding
End Uses:Tarpaulins, Computer Components, Garden Equipment, Commercial Appliance, Turf Applications, Electrical Components, Pool Covers, Displays, Personal Accessories, Home Appliances, Cell Phones, Tablets, Food Preparation Equipment, Electrical/Electronic Applications, Building Materials, Lawn Equipment, Sporting Goods, Containers, Consumer Applications, Appliances
Density:1350.0 - 1350.0 kg/m³
Strain at Break:12.7 - 12.7 %
Flexural Modulus:310.0 - 310.0 MPa

LNP THERMOCOMP YF004 compound is based on Thermoplastic Polyester Elastomer (TPE) resin containing 20% glass fiber.

HI-PRENE T335AS banner

GS-CaltexHI-PRENE T335AS

Applications:Consumer Electronics, Appliances & Electronics, Devices & Assemblies
Product Families:Thermoplastic Olefin Elastomers (TPO), Thermoplastic Elastomers
Chemical Family:Polyolefins
Polymer Name:Thermoplastic Polyolefin (TPO)
End Uses:Appliances, Lawn Equipment, Garden Equipment

HI-PRENE T335AS is a soft Thermo Plastic Elastomer(TPE).

SEBS - ELASTRON G500.A50.B.PA banner

ElastronSEBS - ELASTRON G500.A50.B.PA

Tear Strength:20.0 - 20.0 kN/m
Strain at Break:500.0 - 500.0 %
Compression Set (70 °C):27.0 - 27.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to PA.

SEBS - ELASTRON G100.A70.B banner

ElastronSEBS - ELASTRON G100.A70.B

Tear Strength:35.0 - 35.0 kN/m
Strain at Break:750.0 - 750.0 %
Compression Set (70 °C):50.0 - 50.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

SEBS - ELASTRON G301.A75.N banner

ElastronSEBS - ELASTRON G301.A75.N

Tear Strength:36.0 - 36.0 kN/m
Strain at Break:750.0 - 750.0 %
Compression Set (70 °C):48.0 - 48.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

PLASMER® 1040DB/DN banner

Hyundai EPPLASMER® 1040DB/DN

Applications:Other Building & Construction Applications, Lighting, Exterior & Body
Product Families:Thermoplastic Olefin Elastomers (TPO), Thermoplastic Elastomers
Chemical Family:Polyolefins, Polyethylenes
Polymer Name:Ethylene-based Elastomer (POE)
End Uses:Housings, Automotive Interior Parts, Automotive Exterior Parts

PLASMER® 1040DB/DN is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1040DB/DN is a fully crosslinked product and can be reused without scrap during processing.

PROFLEX T4-11 banner

Celloplast GDPROFLEX T4-11

Applications:Other Wire & Cable Applications, Other Electrical & Electronics Applications, Other Consumer Goods Applications
Product Families:Styrenic Thermoplastic Elastomers (TPE-S), Thermoplastic Elastomers
Polymer Name:Styrene Butadiene Styrene (SBS)
End Uses:Profiles, Power/Other Tools, Cables

PROFLEX T4-11 is a styrene-butadiene-styrene material for injection molding.

EnLast™ 60A banner

EnCom PolymersEnLast™ 60A

Density:1160.0 - 1160.0 kg/m³

EnLast™ 60A by EnCom Polymers is comprised of Thermoplastic Elastomer (unspecified). It is commonly used

EnLast™ 12A banner

EnCom PolymersEnLast™ 12A

Applications:Automotive Lighting, Tooling & Moldmaking, Other Automotive Applications
Product Families:Other Thermoplastic Elastomers, Thermoplastic Elastomers
Polymer Name:Thermoplastic Elastomer (unspecified)
End Uses:Automotive Applications, Appliances, Tooling

EnLast™ 12A by EnCom Polymers is comprised of Thermoplastic Elastomer (unspecified). It is commonly used

SEBS - ELASTRON G100.A75.N banner

ElastronSEBS - ELASTRON G100.A75.N

Tear Strength:40.0 - 40.0 kN/m
Strain at Break:700.0 - 700.0 %
Compression Set (70 °C):59.0 - 59.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

SEBS - ELASTRON G100.A85.B banner

ElastronSEBS - ELASTRON G100.A85.B

Tear Strength:53.0 - 53.0 kN/m
Strain at Break:700.0 - 700.0 %
Compression Set (70 °C):60.0 - 60.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

TPV - ELASTRON V201.A75.B banner

ElastronTPV - ELASTRON V201.A75.B

Density:970.0 - 970.0 kg/m³
Tear Strength:30.0 - 30.0 kN/m
Compression Set (70 °C):37.0 - 37.0 %

A soft, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family which offers higher temperature resistance and excellent compression set with superior UV resistance.

TPV - ELASTRON V100.A85.B banner

ElastronTPV - ELASTRON V100.A85.B

Density:970.0 - 970.0 kg/m³
Tear Strength:45.0 - 45.0 kN/m
Compression Set (70 °C):45.0 - 45.0 %

A soft, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family designed for injection applications.

PLASMER® 1055BM/NM banner

Hyundai EPPLASMER® 1055BM/NM

Applications:Other Building & Construction Applications, Lighting, Jacketing & Insulation
Product Families:Thermoplastic Olefin Elastomers (TPO), Thermoplastic Elastomers
Chemical Family:Polyolefins, Polyethylenes
Polymer Name:Ethylene-based Elastomer (POE)
End Uses:Housings, Automotive Interior Parts, Appliances

PLASMER® 1055BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1055BM/NM is a fully crosslinked product and can be reused without scrap during processing.

SEBS - ELASTRON G510.A80.B.ABS banner

ElastronSEBS - ELASTRON G510.A80.B.ABS

Tear Strength:30.0 - 30.0 kN/m
Strain at Break:400.0 - 400.0 %
Compression Set (70 °C):67.0 - 67.0 %

A soft, black SEBS based thermoplastic elastomer with superior UV resistance (TPE) compound specially designed for excellent adhesion to ABS/PC/PMMA/SAN/ASA/PET and PET-G.

Kebaflex® / E 80.2 banner

BARLOG plastics GmbHKebaflex® / E 80.2

Density:960.0 - 960.0 kg/m³

BARLOG plastics GmbH Kebaflex® / E 80.2 is available in various shore hardnesses from A35 to D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 120°C and is pleasant to the touch.

SEBS - ELASTRON G300.A40.N banner

ElastronSEBS - ELASTRON G300.A40.N

Tear Strength:19.0 - 19.0 kN/m
Strain at Break:1200.0 - 1200.0 %
Compression Set (70 °C):46.0 - 46.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

TPV - ELASTRON V201.A83.B banner

ElastronTPV - ELASTRON V201.A83.B

Density:970.0 - 970.0 kg/m³
Tear Strength:36.0 - 36.0 kN/m
Compression Set (70 °C):42.0 - 42.0 %

A soft, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family which offers higher temperature resistance and excellent compression set with superior UV resistance.

TPV - ELASTRON V201.A75.N banner

ElastronTPV - ELASTRON V201.A75.N

Density:970.0 - 970.0 kg/m³
Tear Strength:30.0 - 30.0 kN/m
Compression Set (70 °C):37.0 - 37.0 %

A soft, colorable thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family which offers higher temperature resistance and excellent compression set with superior UV resistance.

Kebaflex® P D63.1 banner

BARLOG plastics GmbHKebaflex® P D63.1

Density:1230.0 - 1230.0 kg/m³
Strain at Break:500.0 - 500.0 %

Polyester elastomer, Shore D63

TPV - ELASTRON V201.D40.B banner

ElastronTPV - ELASTRON V201.D40.B

Density:950.0 - 950.0 kg/m³
Tear Strength:94.0 - 94.0 kN/m
Compression Set (70 °C):57.0 - 57.0 %

A hard, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family which offers higher temperature resistance and excellent compression set with superior UV resistance.

TPV - ELASTRON V100.A55.B banner

ElastronTPV - ELASTRON V100.A55.B

Density:970.0 - 970.0 kg/m³
Tear Strength:22.0 - 22.0 kN/m
Compression Set (70 °C):33.0 - 33.0 %

A soft, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family designed for injection applications.

FlexPlast 4005D banner

Poly Chem AlloyFlexPlast 4005D

Density:855.0 - 910.0 kg/m³

Poly Chem Alloy FlexPlast 4005D is a plastic material that combines the processing advantages of a thermoplastic with the properties and performance of a rubber-like material. The product is a soft, flexible, highly elastic material that can be custom formulated to perform in a variety of processes, including injection molding, extrusion, blow molding, and thermoforming. These lower modulus, flexible materials can typically be stretched repeatedly, only to return to their original shape when relaxed. When heated, FlexPlast will soften until it flows, making it suitable for formation into complex shapes using standard thermoplastic processing equipment.

SEBS - ELASTRON G501.A60.N.PS banner

ElastronSEBS - ELASTRON G501.A60.N.PS

Tear Strength:30.0 - 30.0 kN/m
Strain at Break:600.0 - 600.0 %
Compression Set (70 °C):78.0 - 78.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to PS.

SEBS - ELASTRON G400.A50.B banner

ElastronSEBS - ELASTRON G400.A50.B

Tear Strength:27.0 - 27.0 kN/m
Strain at Break:950.0 - 950.0 %
Compression Set (70 °C):39.0 - 39.0 %

A soft, black unfilled SEBS based thermoplastic elastomer (TPE) compound which has very good physical properties and chemical resistance. This product is a good option when good abrasion resistance is required.

Kebaflex® S 35 A.01 banner

BARLOG plastics GmbHKebaflex® S 35 A.01

Polymer Name:Styrenic Thermoplastic Elastomer
Strain at Break:630.0 - 630.0 %

TPE-S, Shore A31, translucent, food compliant according to EU 10/2011 and FDA

SEBS - ELASTRON G200.A70.B banner

ElastronSEBS - ELASTRON G200.A70.B

Tear Strength:40.0 - 40.0 kN/m
Strain at Break:600.0 - 600.0 %
Compression Set (70 °C):38.0 - 38.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers high temperature resistance and excellent compression set with superior UV resistance.

SEBS - ELASTRON G400.A65.N banner

ElastronSEBS - ELASTRON G400.A65.N

Tear Strength:41.0 - 41.0 kN/m
Strain at Break:950.0 - 950.0 %
Compression Set (70 °C):44.0 - 44.0 %

A soft, colorable unfilled SEBS based thermoplastic elastomer (TPE) compound which has very good physical properties and chemical resistance. This product is a good option when good abrasion resistance is required.

Show

of 451 results