Products in Thermoplastic Elastomers: Gaskets

423 Products found in Thermoplastic Elastomers

Browse Applications

Espolex® 3675A banner

Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLCEspolex® 3675A

Polymer Name:Thermoplastic Polyolefin (TPO)
Processing Methods:Injection Molding
Features:Cost Effective, Heat Resistance, Consistent High Quality, High Elasticity, Good Surface Appearance, Good Adhesion, Light Weight, Pigmentable, Low Density, Flexible, Good Colorability, High Performance
Density:890.0 - 890.0 kg/m³

Espolex® 3675A is a TPV known for its excellent colorability and appearance. It exhibits strong adhesion to polypropylene compounds and polyethylene, while possessing thermoplastic processing characteristics and rubber-like properties. Applications: Automotive interior (gaskets, grips, etc.) Automotive exterior trim Seat belt sleeves Gaskets Floor mats Overmolding Bathroom accessories Boats Jet-propelled vehicles Mud flaps Weatherstripping Injection molded parts Features: High flowability Rubber-like elasticity and feel Benefits: Recyclable

Espolex® 3785A banner

Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLCEspolex® 3785A

Polymer Name:Thermoplastic Polyolefin (TPO)
Processing Methods:Injection Molding
Features:Cost Effective, Heat Resistance, Consistent High Quality, High Elasticity, Good Surface Appearance, Good Adhesion, Light Weight, Pigmentable, Low Density, Flexible, Good Colorability, High Performance
Density:880.0 - 880.0 kg/m³

Espolex® 3785A is a TPV known for its excellent colorability and appearance. It demonstrates strong adhesion to polypropylene compounds and polyethylene, processing like a thermoplastic while acting like a rubber. Applications: Automotive interior (gaskets, grips, etc.) Automotive exterior Gaskets Mats Overmolding Bathroom accessories Boats Floor mats Jet-propelled vehicles Mud flaps Weatherstripping Injection molded parts Features: High flowability Rubber-like elasticity and feel Benefits: Recyclable

TBA Protective Solutions ECP 280 Colourable Magnetically Detectable TPE for Injection Moulding and Extrusion banner

TBA Protective SolutionsTBA Protective Solutions ECP 280 Colourable Magnetically Detectable TPE for Injection Moulding and Extrusion

Density:960.0 - 960.0 kg/m³

ECP 280 is a magnetic compound based on special blends of magnetic additive compounded into TPE in such a way as to optimize physical and magnetic properties during processing. Normally supplied blue.

SEBS - ELASTRON G500.A50.B.PA banner

ElastronSEBS - ELASTRON G500.A50.B.PA

Tear Strength:20.0 - 20.0 kN/m
Strain at Break:500.0 - 500.0 %
Compression Set (70 °C):27.0 - 27.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to PA.

SEBS - ELASTRON G100.A70.B banner

ElastronSEBS - ELASTRON G100.A70.B

Tear Strength:35.0 - 35.0 kN/m
Strain at Break:750.0 - 750.0 %
Compression Set (70 °C):50.0 - 50.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

SEBS - ELASTRON G301.A75.N banner

ElastronSEBS - ELASTRON G301.A75.N

Tear Strength:36.0 - 36.0 kN/m
Strain at Break:750.0 - 750.0 %
Compression Set (70 °C):48.0 - 48.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

K Prene 7000 XL 50 banner

Technovinyl Polymers (KK Group)K Prene 7000 XL 50

Polymer Name:Thermoplastic Vulcanizate (TPV)
Density:920.0 - 920.0 kg/m³

K-Prene 7000 XL 50 is a translucent thermoplastic elastomer (TPE). Is a soft grade exhibiting good resistance to chemicals & alkali and offering a matt finish & dry feel. Designed for processing by over-molding. K-Prene 7000 XL 50 by Technovinyl Polymers (KK Group) is recommended for grips. It can be used in grips, knife & razor handle, handles for power tools and sporting goods.

PLASMER® 1040DB/DN banner

Hyundai EPPLASMER® 1040DB/DN

Applications:Other Building & Construction Applications, Lighting, Exterior & Body
Product Families:Thermoplastic Olefin Elastomers (TPO), Thermoplastic Elastomers
Chemical Family:Polyolefins, Polyethylenes
Polymer Name:Ethylene-based Elastomer (POE)
End Uses:Housings, Automotive Interior Parts, Automotive Exterior Parts

PLASMER® 1040DB/DN is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1040DB/DN is a fully crosslinked product and can be reused without scrap during processing.

SEBS - ELASTRON G100.A75.N banner

ElastronSEBS - ELASTRON G100.A75.N

Tear Strength:40.0 - 40.0 kN/m
Strain at Break:700.0 - 700.0 %
Compression Set (70 °C):59.0 - 59.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

SEBS - ELASTRON G100.A85.B banner

ElastronSEBS - ELASTRON G100.A85.B

Tear Strength:53.0 - 53.0 kN/m
Strain at Break:700.0 - 700.0 %
Compression Set (70 °C):60.0 - 60.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

SBS - ELASTRON D300.A80.N banner

ElastronSBS - ELASTRON D300.A80.N

Tear Strength:43.0 - 43.0 kN/m
Strain at Break:400.0 - 400.0 %

A soft, colorable SBS based thermoplastic elastomer (TPE) compound designed for general purpose applications.

TPV - ELASTRON V201.A75.B banner

ElastronTPV - ELASTRON V201.A75.B

Density:970.0 - 970.0 kg/m³
Tear Strength:30.0 - 30.0 kN/m
Compression Set (70 °C):37.0 - 37.0 %

A soft, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family which offers higher temperature resistance and excellent compression set with superior UV resistance.

TPV - ELASTRON V100.A85.B banner

ElastronTPV - ELASTRON V100.A85.B

Density:970.0 - 970.0 kg/m³
Tear Strength:45.0 - 45.0 kN/m
Compression Set (70 °C):45.0 - 45.0 %

A soft, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family designed for injection applications.

Neoplast™ 173 M/E banner

ZylogelastocompNeoplast™ 173 M/E

Applications:Healthcare Packaging, Carpet, Waterproofing & Weatherproofing
Product Families:Thermoplastic Vulcanizates (TPV), Thermoplastic Elastomers
Chemical Family:Polypropylenes (PP), Polyolefins
Polymer Name:PP/EPDM, Thermoplastic Vulcanizate Alloy (TPV Alloy)
End Uses:Pharmaceutical Stoppers, Closures, Caps

Neoplast™ 173 M/E are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

PLASMER® 1055BM/NM banner

Hyundai EPPLASMER® 1055BM/NM

Applications:Other Building & Construction Applications, Lighting, Jacketing & Insulation
Product Families:Thermoplastic Olefin Elastomers (TPO), Thermoplastic Elastomers
Chemical Family:Polyolefins, Polyethylenes
Polymer Name:Ethylene-based Elastomer (POE)
End Uses:Housings, Automotive Interior Parts, Appliances

PLASMER® 1055BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1055BM/NM is a fully crosslinked product and can be reused without scrap during processing.

SEBS - ELASTRON G510.A80.B.ABS banner

ElastronSEBS - ELASTRON G510.A80.B.ABS

Tear Strength:30.0 - 30.0 kN/m
Strain at Break:400.0 - 400.0 %
Compression Set (70 °C):67.0 - 67.0 %

A soft, black SEBS based thermoplastic elastomer with superior UV resistance (TPE) compound specially designed for excellent adhesion to ABS/PC/PMMA/SAN/ASA/PET and PET-G.

SEBS - ELASTRON G300.A40.N banner

ElastronSEBS - ELASTRON G300.A40.N

Tear Strength:19.0 - 19.0 kN/m
Strain at Break:1200.0 - 1200.0 %
Compression Set (70 °C):46.0 - 46.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

TPV - ELASTRON V201.A83.B banner

ElastronTPV - ELASTRON V201.A83.B

Density:970.0 - 970.0 kg/m³
Tear Strength:36.0 - 36.0 kN/m
Compression Set (70 °C):42.0 - 42.0 %

A soft, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family which offers higher temperature resistance and excellent compression set with superior UV resistance.

TPO - ELASTRON T100.D60.N banner

ElastronTPO - ELASTRON T100.D60.N

Polymer Name:Thermoplastic Polyolefin (TPO)
Processing Methods:Injection Molding
Features:High Hardness, Good Colorability
Density:980.0 - 980.0 kg/m³
Strain at Break:250.0 - 250.0 %

A hard, colorable thermoplastic polyolefin elastomer (TPO) material belongs to thermoplastic elastomer (TPE) family designed for general purpose applications.

TPV - ELASTRON V201.A75.N banner

ElastronTPV - ELASTRON V201.A75.N

Density:970.0 - 970.0 kg/m³
Tear Strength:30.0 - 30.0 kN/m
Compression Set (70 °C):37.0 - 37.0 %

A soft, colorable thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family which offers higher temperature resistance and excellent compression set with superior UV resistance.

TPV - ELASTRON V201.D40.B banner

ElastronTPV - ELASTRON V201.D40.B

Density:950.0 - 950.0 kg/m³
Tear Strength:94.0 - 94.0 kN/m
Compression Set (70 °C):57.0 - 57.0 %

A hard, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family which offers higher temperature resistance and excellent compression set with superior UV resistance.

TPV - ELASTRON V100.A55.B banner

ElastronTPV - ELASTRON V100.A55.B

Density:970.0 - 970.0 kg/m³
Tear Strength:22.0 - 22.0 kN/m
Compression Set (70 °C):33.0 - 33.0 %

A soft, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family designed for injection applications.

Super Asia Polyblend 30AN banner

Super Asia PolyblendSuper Asia Polyblend 30AN

Polymer Name:Thermoplastic Elastomer (unspecified)
Processing Methods:Injection Molding
End Uses:Medical Devices, Food Containers, Sporting Goods, Gaskets

Super Asia Polyblend 30AN is an thermoplastic elastomer ( TPE/ TPR) compounds.

Super Asia Polyblend 75AN banner

Super Asia PolyblendSuper Asia Polyblend 75AN

Polymer Name:Thermoplastic Elastomer (unspecified)
Processing Methods:Injection Molding
End Uses:Medical Devices, Food Containers, Sporting Goods, Gaskets

Super Asia Polyblend 75AN is an thermoplastic elastomer ( TPE/ TPR) compounds.

TPO - ELASTRON T401.D32.N banner

ElastronTPO - ELASTRON T401.D32.N

Polymer Name:Thermoplastic Polyolefin (TPO)
Processing Methods:Injection Molding
Features:High Hardness, Good Colorability
Density:910.0 - 910.0 kg/m³
Strain at Break:400.0 - 400.0 %

A hard, colorable thermoplastic polyolefin elastomer (TPO) material belongs to thermoplastic elastomer (TPE) family designed for general purpose applications.

TPE Solutions TPV 135A banner

TPE SolutionsTPE Solutions TPV 135A

Polymer Name:Thermoplastic Vulcanizate (TPV)
Processing Methods:Blow Molding, Injection Molding, Extrusion
Tear Strength:16.0 - 16.0 kN/m

TPE Solutions TPV 135A is an EPDM/PP TPV compound designed to replace thermoset elastomers such as polychloroprene (Neoprene) and EPDM compounds as well as sponge. This grade is a Shore 35A fully vulcanized EPDM/PP TPV. This grade is black and designed for applications that require low hardness. Ideal for applications in the Automotive and Building Construction market that requires excellent ozone and uv resistance. TPV rubber provides the advantage of low-cost thermoplastic processing such as Injection Molding, Extrusion and blow molding.

SEBS - ELASTRON G501.A60.N.PS banner

ElastronSEBS - ELASTRON G501.A60.N.PS

Tear Strength:30.0 - 30.0 kN/m
Strain at Break:600.0 - 600.0 %
Compression Set (70 °C):78.0 - 78.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to PS.

SEBS - ELASTRON G400.A50.B banner

ElastronSEBS - ELASTRON G400.A50.B

Tear Strength:27.0 - 27.0 kN/m
Strain at Break:950.0 - 950.0 %
Compression Set (70 °C):39.0 - 39.0 %

A soft, black unfilled SEBS based thermoplastic elastomer (TPE) compound which has very good physical properties and chemical resistance. This product is a good option when good abrasion resistance is required.

INNOPRENE 1350 banner

Kumho PolychemINNOPRENE 1350

Applications:Equipment & Parts, Glazing & Window Elements, Data Communication Cables
Product Families:Thermoplastic Vulcanizates (TPV), Thermoplastic Elastomers
Polymer Name:Thermoplastic Vulcanizate (TPV)
End Uses:Cup Holders, Speciality Cables, Protective Coverings

INNOPRENE 1350 is a product that is already completely cross-linked and there is no need for an extra cross-link process before its ultimate use. Also, it is possible to simplify the processes and reduce the prime cost as it is an environment-friendly material allowing for an easy recycle of scraps resulted from processing.

SEBS - ELASTRON G200.A70.B banner

ElastronSEBS - ELASTRON G200.A70.B

Tear Strength:40.0 - 40.0 kN/m
Strain at Break:600.0 - 600.0 %
Compression Set (70 °C):38.0 - 38.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers high temperature resistance and excellent compression set with superior UV resistance.

SEBS - ELASTRON G400.A65.N banner

ElastronSEBS - ELASTRON G400.A65.N

Tear Strength:41.0 - 41.0 kN/m
Strain at Break:950.0 - 950.0 %
Compression Set (70 °C):44.0 - 44.0 %

A soft, colorable unfilled SEBS based thermoplastic elastomer (TPE) compound which has very good physical properties and chemical resistance. This product is a good option when good abrasion resistance is required.

TPV - ELASTRON V103.A60.N banner

ElastronTPV - ELASTRON V103.A60.N

Density:970.0 - 970.0 kg/m³
Tear Strength:21.0 - 21.0 kN/m
Compression Set (70 °C):37.0 - 37.0 %

A soft, colorable thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer family that offers good physical properties and chemical resistance.

SEBS - ELASTRON G400.A22.N banner

ElastronSEBS - ELASTRON G400.A22.N

Tear Strength:13.0 - 13.0 kN/m
Strain at Break:1200.0 - 1200.0 %
Compression Set (70 °C):52.0 - 52.0 %

A soft, colorable unfilled SEBS based thermoplastic elastomer (TPE) compound which has very good physical properties and chemical resistance. This product is a good option when good abrasion resistance is required.

Core Elastomers TPV-45A-Blk banner

Core ElastomersCore Elastomers TPV-45A-Blk

Density:950.0 - 950.0 kg/m³

Core Elastomers TPV-45A-Blk is a thermoplastic vulcanizate, soft general purpose grade used in a wide array of applications.

TPO - ELASTRON T100.D43.N banner

ElastronTPO - ELASTRON T100.D43.N

Polymer Name:Thermoplastic Polyolefin (TPO)
Processing Methods:Injection Molding
Features:High Hardness, Good Colorability
Density:980.0 - 980.0 kg/m³
Strain at Break:500.0 - 500.0 %

A hard, colorable thermoplastic polyolefin elastomer (TPO) material belongs to thermoplastic elastomer (TPE) family designed for general purpose applications.

TPV - ELASTRON V101.D35.B banner

ElastronTPV - ELASTRON V101.D35.B

Density:960.0 - 960.0 kg/m³
Tear Strength:75.0 - 75.0 kN/m
Compression Set (70 °C):60.0 - 60.0 %

A hard, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer family that offers good physical properties and chemical resistance.

Show

of 423 results