Products in Thermoplastic Elastomers: Hoses

555 Products found in Thermoplastic Elastomers

Browse Applications

Paracril™ OZO3996 banner

Dynasol ElastomersParacril™ OZO3996

Polymer Name:NBR/PVC

Paracril OZO3996 is a pre-fluxed blend of NBR/PVC containing 40% PVC.

TPV - ELASTRON V206.D40.B banner

ElastronTPV - ELASTRON V206.D40.B

Density:900.0 - 900.0 kg/m³
Tear Strength:60.0 - 60.0 kN/m
Compression Set (70 °C):55.0 - 55.0 %

A hard, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family designed for low coefficient of friction requirements.

SEBS - ELASTRON G500.A40.B.PA banner

ElastronSEBS - ELASTRON G500.A40.B.PA

Tear Strength:16.0 - 16.0 kN/m
Strain at Break:500.0 - 500.0 %
Compression Set (70 °C):34.0 - 34.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to PA.

PLASMER® 1045BM/NM banner

Hyundai EPPLASMER® 1045BM/NM

Applications:Other Building & Construction Applications, Lighting, Exterior & Body
Product Families:Thermoplastic Olefin Elastomers (TPO), Thermoplastic Elastomers
Chemical Family:Polyolefins, Polyethylenes
Polymer Name:Ethylene-based Elastomer (POE)
End Uses:Housings, Automotive Interior Parts, Automotive Exterior Parts

PLASMER® 1045BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1045BM/NM is a fully crosslinked product and can be reused without scrap during processing.

SEBS - ELASTRON F.G100.A60.N banner

ElastronSEBS - ELASTRON F.G100.A60.N

Tear Strength:30.0 - 30.0 kN/m
Strain at Break:800.0 - 800.0 %
Compression Set (70 °C):51.0 - 51.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound designed for contact with non-fatty foods.The monomers and additives used to produce this product are listed in the Union List of Authorized Substances of Regulation 10/2011/EC.

Techno Polymer JSR NV74 banner

JSR CorporationTechno Polymer JSR NV74

Applications:Maintenance, Repair & Overhaul, Other Power, Water & Utilities Applications, Other Industrial Applications
Product Families:Elastomer Blends, Thermoplastic Elastomers
Chemical Family:Nitrile Rubbers, Vinyls, Vinylics & Vinyl Derivatives
Polymer Name:NBR/PVC
End Uses:Hoses

JSR NV Series are Polymer Alloys consisting of Acrylonitrile Rubber and Poly Vinyl Chloride. It has good processability and extrusion characteristics.

TPV - ELASTRON V206.A60.B banner

ElastronTPV - ELASTRON V206.A60.B

Density:910.0 - 910.0 kg/m³
Tear Strength:25.0 - 25.0 kN/m
Compression Set (70 °C):34.0 - 34.0 %

A soft, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family designed for low coefficient of friction requirements.

SEBS - ELASTRON G500.A50.N.PA banner

ElastronSEBS - ELASTRON G500.A50.N.PA

Tear Strength:20.0 - 20.0 kN/m
Strain at Break:500.0 - 500.0 %
Compression Set (70 °C):37.0 - 37.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to PA.

SEBS - ELASTRON G341.A60.N banner

ElastronSEBS - ELASTRON G341.A60.N

Tear Strength:28.0 - 28.0 kN/m
Strain at Break:700.0 - 700.0 %
Compression Set (70 °C):44.0 - 44.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound for foaming applications.

EVERLON® TS-20 banner

Ever PolymerEVERLON® TS-20

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:Injection Molding
Tear Strength:14.7 - 14.7 kN/m
Strain at Break:800.0 - 800.0 %

EVERLON® TS-20 is a generally grade and is based on SEBS, suitable for insert molding, excellent bonding PP. All kinds of hardness are prepared very well, excellent weatherability, stability of UV and the physical mechanical property.

TPV - ELASTRON V201.A45.N banner

ElastronTPV - ELASTRON V201.A45.N

Density:950.0 - 950.0 kg/m³
Tear Strength:16.0 - 16.0 kN/m
Compression Set (70 °C):25.0 - 25.0 %

A soft, colorable thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family which offers higher temperature resistance and excellent compression set with superior UV resistance.

SEBS - ELASTRON G103.A79.B banner

ElastronSEBS - ELASTRON G103.A79.B

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:Injection Molding
Tear Strength:35.0 - 35.0 kN/m
Strain at Break:700.0 - 700.0 %
Compression Set (70 °C):62.0 - 62.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

SEBS - ELASTRON F.G100.A65.B banner

ElastronSEBS - ELASTRON F.G100.A65.B

Tear Strength:30.0 - 30.0 kN/m
Strain at Break:700.0 - 700.0 %
Compression Set (70 °C):48.0 - 48.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound designed for contact with non-fatty foods.The monomers and additives used to produce this product are listed in the Union List of Authorized Substances of Regulation 10/2011/EC.

TPV - ELASTRON V100.D40.N banner

ElastronTPV - ELASTRON V100.D40.N

Density:900.0 - 900.0 kg/m³
Tear Strength:95.0 - 95.0 kN/m
Compression Set (70 °C):63.0 - 63.0 %

A hard, colorable thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family designed for injection applications.

Techno Polymer JSR NV72 banner

JSR CorporationTechno Polymer JSR NV72

Polymer Name:NBR/PVC

JSR NV Series are Polymer Alloys consisting of Acrylonitrile Rubber and Poly Vinyl Chloride. It has good processability and extrusion characteristics.

Emulprene™ 1732 banner

Dynasol ElastomersEmulprene™ 1732

Polymer Name:Styrene Butadiene Block Copolymer

Emulprene 1732 is a copolymer styrene-butadiene, cold emulsion polymerized used fatty acid as emulsifier, coagulated by salt – acid system and it is extended utilizing 32.5phr of naphthenic oil.

MARFRAN® E FG1 banner

MARFRANMARFRAN® E FG1

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:Injection Molding

MARFRAN® E FG1 is a TPE-SSBS base polyolefin polymers and others with SEBS elastomer. This Compounds for injection molding and extrusion: soft to the touch, it guarantees excellent resistance to aging and atmospheric agents, low compression set, high elasticity, easy to work, colorable and high transparency.

SEBS - ELASTRON G418.A60.B banner

ElastronSEBS - ELASTRON G418.A60.B

Tear Strength:24.0 - 24.0 kN/m
Strain at Break:1000.0 - 1000.0 %

A soft, black unfilled SEBS based thermoplastic elastomer (TPE) which has non-migratory type antistatic properties. Non- migratory type antistatic property is independent from relative humidity. This product is a good option when permanent antistatic property is required.

SEBS - ELASTRON G300.A55.B banner

ElastronSEBS - ELASTRON G300.A55.B

Tear Strength:20.0 - 20.0 kN/m
Strain at Break:800.0 - 800.0 %
Compression Set (70 °C):46.0 - 46.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

VinoPrene 701 banner

RishiroopVinoPrene 701

Applications:Other Wire & Cable Applications, Other Industrial Applications, Consumer Electronics
Product Families:Elastomer Blends, Thermoplastic Elastomers
Chemical Family:Vinyls, Vinylics & Vinyl Derivatives
Polymer Name:NBR/PVC
End Uses:Printer Parts, Hoses, Footwear

VinoPrene 701 are a group of nitrile rubber (NBR) / Polyvinyl Chloride (PVC) blends.

SEBS - ELASTRON F.G401.A40.B banner

ElastronSEBS - ELASTRON F.G401.A40.B

Tear Strength:24.0 - 24.0 kN/m
Strain at Break:1200.0 - 1200.0 %
Compression Set (70 °C):36.0 - 36.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound designed for contact with non-fatty foods.The monomers and additives used to produce this product are listed in the Union List of Authorized Substances of Regulation 10/2011/EC.

SEBS - ELASTRON G500.A50.B.ABS banner

ElastronSEBS - ELASTRON G500.A50.B.ABS

Tear Strength:25.0 - 25.0 kN/m
Strain at Break:750.0 - 750.0 %
Compression Set (70 °C):68.0 - 68.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to ABS/PC/PMMA/SAN/ASA/PET and PET-G.

TPV - ELASTRON V100.A50.N banner

ElastronTPV - ELASTRON V100.A50.N

Density:920.0 - 920.0 kg/m³
Tear Strength:19.0 - 19.0 kN/m
Compression Set (70 °C):30.0 - 30.0 %

A soft, colorable thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family designed for injection applications.

SEBS - ELASTRON G500.A80.N.ABS banner

ElastronSEBS - ELASTRON G500.A80.N.ABS

Tear Strength:55.0 - 55.0 kN/m
Strain at Break:700.0 - 700.0 %
Compression Set (70 °C):67.0 - 67.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to ABS/PC/PMMA/SAN/ASA/PET and PET-G.

TPV - ELASTRON V100.A85.B banner

ElastronTPV - ELASTRON V100.A85.B

Density:970.0 - 970.0 kg/m³
Tear Strength:45.0 - 45.0 kN/m
Compression Set (70 °C):45.0 - 45.0 %

A soft, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family designed for injection applications.

SEBS - ELASTRON G300.A36.B banner

ElastronSEBS - ELASTRON G300.A36.B

Tear Strength:16.0 - 16.0 kN/m
Strain at Break:800.0 - 800.0 %
Compression Set (70 °C):34.0 - 34.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

VinoPrene 710 banner

RishiroopVinoPrene 710

Applications:Other Wire & Cable Applications, Other Industrial Applications, Consumer Electronics
Product Families:Elastomer Blends, Thermoplastic Elastomers
Chemical Family:Vinyls, Vinylics & Vinyl Derivatives
Polymer Name:NBR/PVC
End Uses:Printer Parts, Hoses, Footwear

VinoPrene 710 are a group of nitrile rubber (NBR) / Polyvinyl Chloride (PVC) blends.

SEBS - ELASTRON G250.A65.B banner

ElastronSEBS - ELASTRON G250.A65.B

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:Injection Molding
Tear Strength:28.0 - 28.0 kN/m
Strain at Break:800.0 - 800.0 %
Compression Set (70 °C):40.0 - 40.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers high temperature resistance and excellent compression set with superior UV resistance. This product is specially designed for weatherseal applications.

Neoplast™ 163 FT EB banner

ZylogelastocompNeoplast™ 163 FT EB

Applications:Healthcare Packaging, Carpet, Waterproofing & Weatherproofing
Product Families:Thermoplastic Vulcanizates (TPV), Thermoplastic Elastomers
Chemical Family:Polypropylenes (PP), Polyolefins
Polymer Name:PP/EPDM, Thermoplastic Vulcanizate Alloy (TPV Alloy)
End Uses:Pharmaceutical Stoppers, Closures, Caps

Neoplast™ 163 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

SEBS - ELASTRON G510.A80.B.ABS banner

ElastronSEBS - ELASTRON G510.A80.B.ABS

Tear Strength:30.0 - 30.0 kN/m
Strain at Break:400.0 - 400.0 %
Compression Set (70 °C):67.0 - 67.0 %

A soft, black SEBS based thermoplastic elastomer with superior UV resistance (TPE) compound specially designed for excellent adhesion to ABS/PC/PMMA/SAN/ASA/PET and PET-G.

SEBS - ELASTRON P.G401.A70.N banner

ElastronSEBS - ELASTRON P.G401.A70.N

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:Extrusion, Injection Molding
Tear Strength:45.0 - 45.0 kN/m
Strain at Break:950.0 - 950.0 %
Compression Set (70 °C):43.0 - 43.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound designed for use in medical applications.

SEBS - ELASTRON G101.A90.N banner

ElastronSEBS - ELASTRON G101.A90.N

Tear Strength:67.0 - 67.0 kN/m
Strain at Break:650.0 - 650.0 %
Compression Set (70 °C):60.0 - 60.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

SEBS - ELASTRON G100.A55.B banner

ElastronSEBS - ELASTRON G100.A55.B

Tear Strength:27.0 - 27.0 kN/m
Strain at Break:700.0 - 700.0 %
Compression Set (70 °C):45.0 - 45.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

SEBS - ELASTRON G101.A58.B banner

ElastronSEBS - ELASTRON G101.A58.B

Tear Strength:26.0 - 26.0 kN/m
Strain at Break:750.0 - 750.0 %
Compression Set (70 °C):45.0 - 45.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

RE-FLEX® 1592AJL banner

Townsend ChemicalsRE-FLEX® 1592AJL

Density:1130.0 - 1130.0 kg/m³
Strain at Break:560.0 - 560.0 %

RE-FLEX® 1592AJL is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

Neoplast™ 173 M/E banner

ZylogelastocompNeoplast™ 173 M/E

Applications:Healthcare Packaging, Carpet, Waterproofing & Weatherproofing
Product Families:Thermoplastic Vulcanizates (TPV), Thermoplastic Elastomers
Chemical Family:Polypropylenes (PP), Polyolefins
Polymer Name:PP/EPDM, Thermoplastic Vulcanizate Alloy (TPV Alloy)
End Uses:Pharmaceutical Stoppers, Closures, Caps

Neoplast™ 173 M/E are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Show

of 555 results