Products in Thermoplastic Elastomers: Compounding

Laripur® 7025EG is a polyester-based TPU (Thermoplastic Polyurethane). The standard version of this product is well-suited for various applications, including injection molding for technical items and tool overmolding. On the other hand, the EG version is specifically designed for hose, profile, and film extrusion, as well as for compounding with other thermoplastics. This versatility allows Laripur® 7025EG to be used in a wide range of applications across different industries.

Kraton® D4270B is an oiled, branched copolymer based on styrene and butadiene with a polystyrene content of 32%. It is supplied from South America in the physical form identified below. D4270BT supplied as a dusted porous pellet D4270BS supplied as a dusted porous pellet Kraton D4270B is used for formulating compound for footwear and general purpose applications.

TPU T3190X is a polyester based material with good processability, short cycle time, and excellent mechanical properties for injection molding applications.

Calprene 718 is a new 75/25 butadiene/styrene Thermoplastic copolymer, polymerized in solution and having a radial structure.This product is stabilized with a non-staining antioxidant system, essentially gel free with a very clear color.Calprene 718 offers good processability and develops softer compounds when compared to other linear SBS grades. This grade has a 10% of diblock content.Calprene 718 is supplied in porous pellets.

Kraton G1654 E polymer is a clear, linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 30% mass. It is supplied from Europe in the physical form shown below. Kraton G1654 ES - supplied as a "fluffy" crumb dusted with amorphous silica Kraton G1654 E is used as a base material for themoplastic elastomer (TPE) compound formulations for a variety of applications. It is also used as a modifier of thermoplastics and bitumen. The inherent stability of SEBS polymers suggests the use of G1654 E in applications that must withstand weathering and high processing temperatures.

Kraton G1702 H is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations. Kraton G1702 HU - supplied as an undusted powder Kraton G1702 HF - supplied as a dusted powder Kraton G1702 H is a clear, linear diblock copolymer based on styrene and ethylene/propylene with a polystyrene content of 28%. It is supplied from North America in the physical form identified below.

General Industrial Polymers SBS-GP 4000 is a styrene - Butadiene block copolymer specially designed for asphalt modification, compounding and for solvent based adhesive applications.

Kraton G1650 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton G1650 MU - supplied as a powder Kraton G1650 M is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

TATREN TPO 12 76 is a controlled rheology extra high impact resistance thermoplastic polyolefin with exceptional impact properties even at low temperatures. It is a grade of medium fluidity and contains nucleating agent. TATREN TPO 12 76 is characterized by exceptionally high impact resistance even at minus temperatures and very good impact/stiffness balance.

Kraton D4150 K is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied from North America in the physical form identified below. Kraton D4150 KT - supplied as a dusted porous pellet Kraton D4150 KU - supplied as an undusted porous pellet Kraton D4150 K is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications, molded and extruded goods applications and may be used in formulating adhesives, sealants, and coatings.

Calprene H6120 is a 68/32 ethylene-butylene/styrene thermo-plastic copolymer, polymerized in solution and having a linear structure with excellent ozone resistance. Calprene H6120 meets the requirements of the USP class VI plastic classification.This product is available in: - Calprene H6120 porous crumbs. - Calprene H6120 P powder form dusted WITH amorphous silica. - Calprene H6120 PH powder form WITHOUT any dusting agent.

Kraton D1102 B is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 29.5%. It is supplied from South America in the physical form identified below. D1102 BT supplied as a dusted pellet Kraton D1102 B is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.

Calprene H6174 is a 67/33 linear structure ethylene-butylene/styrene thermoplastic copolymer, polymerized in solution, with a high molecular weight and excellent ozone resistance. This product gives an excellent surface appearance to the injected or extruded compounds and meets the re-quirements of the USP class VI plastic classification.

TPU T3185 is a polyester based material with good processability, short cycle time, and excellent mechanical properties for injection molding applications.

General Industrial Polymers SBS-GP 1 is a styrene - Butadiene block copolymer designed for asphalt modification, solvent based adhesives, and for compoundingapplications.

Kraton FG1924 G is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 13% . It is supplied from North America in the physical form identified below. FG1924 GT - supplied as a dense pellet dusted with talc FG1924 GO - supplied as a dense pellet dusted with organic dust Kraton FG1924 G is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.

TATREN TPO 20 77 is a controlled rheology extra high impact resistance thermoplastic polyolefin with exceptional impact properties even at low temperatures. It is a grade of medium fluidity and contains nucleating agent. TATREN TPO 20 77 is characterized by exceptionally high impact resistance even at minus temperatures and very good impact/stiffness balance.

Calprene 701 is a new 69/31 butadiene/styrene Thermoplastic copolymer, polymerized in solution and having a linear structure.This product is stabilized with a non-staining antioxidant system, essentially gel free with a very clear color. Calprene 701 is a BHT* and nonylphenol free SBS, especially suitable for food contact applications.Calprene 701 offers good mechanical properties and shows a very good yellow index behavior.Calprene 701 is supplied in porous crumb.*(BHT content in pure polymer less than 30ppm).

Solprene 490 is butadiene/styrene SBS thermoplastic copolymer with 70/30 percentage monomer composition and polymerized in solution. It has a radial structure and is extended with 32% naphthenic oil.This grade has an SB di-block content, which may improve tack and flow properties in different applications.The right balance between molecular weight and oil composition permits to get high softening point and modulus properties as well as easy polymer time dispersion on polymer modified asphalt. This product was designed to give adequate rheological and heat flow resistance on asphalt shingles.Also, Solprene 490 can be used in footwear compounding to give high mechanical properties.

Kraton D1119 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied from North America in the physical form identified below. Kraton D1119 PT - supplied as a dusted dense pellet Kraton D1119 PSM - supplied as a powder dusted with silica Kraton D1119 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton D-1161 polymer is a clear linear triblock copolymer based on styrene and isoprene, with bound styrene of 15% mass. Kraton D-1161 polymer is used in fomulating adhesives ,sealants and coatings, and may also be used as a modifier of bitumen.

Calprene H6170 is a 67/33 ethylene-butylene/styrene thermo-plastic copolymer, polymerized in solution and having a linear structure with excellent ozone resistance.This product is available in: - Calprene H6170 porous crumbs. - Calprene H6170 P powder form dusted WITH amorphous silica. - Calprene H 6170 PH powder form WITHOUT any dusting agent.

TPU T3160 is a polyester based material with good processability, short cycle time, and excellent mechanical properties for injection molding applications.

Miracll Chemicals E 165D is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Kraton D1124 P is a clear, branched copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton D1124 PT - supplied as a dusted dense pellet Kraton D1124 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

General Industrial Polymers SBS-GP 3 is a styrene - Butadiene block copolymer specially designed for asphalt modification, compounding and for solvent based adhesivea pplications.

Miracll Chemicals E 190 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

TPU T170 is a polyester based material with good processability, short cycle time, and excellent mechanical properties for injection molding applications.

Kraton A1535 H is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 57%. It is supplied from North America in the physical form identified below. Kraton A1535 HU - supplied as an undusted powder Kraton A1535 H is used as a base material for compound formulations and as a modifier of thermoplastics. The inherent stability of the mid block suggests the use of this product in applications that must withstand weathering and high processing temperatures.

Kraton D4271 J is an oil-extended branched block copolymer based on styrene and butadiene, with bound styrene of 45% mass. It is supplied from Japan in the physical forms below. Kraton D4271 JSP - supplied as dusted dense pellets Kraton D4271 JS - supplied as dusted crumb Kraton D4271 J is used for formulating compounds for footwear and general purpose applications and as a modifier of bitumen.

Kraton D1160 B is a clear linear triblock copolymer based on styrene and isoprene with bound styrene of 18.5% mass. It is supplied from South America in the physical form identified below. Kraton D1160 BT - supplied as a porous pellet dusted with talc Kraton D1160 B is used in formulating adhesives, in particular hot melt pressure sensitive adhesives.

Kraton G4610 H is a white mineral oil extended linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 33%. Nominal oil content of the polymer is 31%w (45 parts/100 part rubber (phr). It is supplied from North America in the physical form identified below. G4610 HU - supplied as an undusted powder crumb. Kraton G4610 H is used as a base material for thermoplastic elastomer (TPE) compound formulations for a variety of applications. It is also used as a modifier of thermoplastics and bitumen. The inherent stability of SEBS polymers suggests the use of G4610 H in applications that must withstand weathering and high processing temperatures.

Stereon™SR8983 is a solution polymerized linear styrene-butadiene multi-block thermoplastic elastomer. This material has been designed as a graftable rubber modifier that is reacted with bromine and processed into a clean, white powder. The brominated Stereon™SR8983 is then combined with polystyrene to produce a flame retardant foam insulation used in building and home construction.

Kraton D1155 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied from Europe in the physical form identified below. Kraton D1155 ES - supplied as porous pellets dusted with amorphous silica Kraton D1155 E is used in the modification of polymers and in compounds for technical and footwear applications. It is also used in formulating adhesives, sealants and coatings and as a modifier for bitumen.

Kraton G1641 H is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 33%. It is supplied from North America in the physical form identified below. Kraton G1641 HU - supplied as an undusted powder/fluffy crumb Kraton G1641 HS - supplied as a dusted powder/fluffy crumb Kraton G1641 H is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Solprene 416 is a radial styrene/butadiene block copolymer having 30% of styrene content, most of it forming a polystyrenes block which gives the polymer a thermoplastic behavior. It develops properties of vulcanized rubber yet not requiring vulcanization.It is protected with a non staining antioxidant system; FDA approved, suitable for food contact applications and is essentially gel free with a clear color.Solprene 416 is used as elastomeric modifier for asphalt and plastics, as ingredient of soling formulations and as base for pressure sensitive adhesives.