Products in EP Rubbers (EPDM): Wires

AquaGraft® 61-7125 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

AquaGraft® 16-5150 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

AquaGraft® 4-5150 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

Orange polymeric composition in pellet form, based on EPR rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line.

SuperOhm® 3754 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

Superohm® 2565 is an oil and solvent resistant off-white colorable polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line. It is formulated to obtain balanced performance characteristics with excellent electrical properties suitable for operation up to 450F (230C) and 25 kV in appropriate cable construction when extruded and cured consistent with industry standards.

SuperOhm® 2595 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

AquaGraft® EPMC-2 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

Orange polymeric composition in pellet form, based on EPR rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line.

Off-white colorable, flame retardant, low voltage composition in pellet form, EPDM-rubber based and containing peroxide curing agent, ready for extrusion in a conventional CV line.

SuperOhm® 3450 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

Off-white colorable, flame retardant, low voltage composition in pellet form, EPDM-rubber based and containing peroxide curing agent, ready for extrusion in a conventional CV line.

Reddish - orange colored polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line.

SuperOhm® 3768 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

Reddish - orange colored polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line.

AquaGraft® 7020 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

Colorable flame retardant polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV extrusion line. Cables insulated with this compound are recognized for balanced properties including excellent heat, radiation, deformation resistance at high temperatures, and superior flexibility.

SuperOhm® 3455 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

Superohm® 240 NL-HE is a RoHS compliant, highly flexible, colorable, polymeric composition in pellet form, based on EPR rubber, containing peroxide curing agent, ready for extrusion in a conventional CV or Dry cure extrusion line. It is formulated to obtain balanced performance characteristics with excellent electrical properties suitable for applications up to 25kV.

Off-white colorable, flame retardant, low voltage composition in pellet form, EPDM-rubber based and containing peroxide curing agent, ready for extrusion in a conventional CV line.

Superohm® 2560 is an oil and solvent resistant off-white colorable polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line. Cables jacketed with this compound are recognized for balanced properties including excellent heat and deformation resistance at high temperatures, oil resistance, and superior mechanical properties and is suitable for operation up to 450F (230C) in appropriate cable construction when extruded and cured consistent with industry standards.

Colorable flame retardant polymeric composition in pellet form, based on EPR rubber containing peroxide curing agent, ready for extrusion in a conventional CV extrusion line. Cables insulated with this compound are recognized for balanced properties including excellent heat, radiation, crush, deformation resistance at high temperatures, and superior flexibility.

SuperOhm® 2575 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

AquaGraft® 8020 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

AquaGraft® EPMC-16 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

AquaGraft® EPMC-4 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

Aquagraft® 16-6010 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

Off-white colorable, flame retardant, low voltage composition in pellet form, EPDM-rubber based and containing peroxide curing agent, ready for extrusion in a conventional CV line.

Superohm® 3443 is a UL listed 150°C stationary, 125°C flexible low smoke, non-halogenated, lead free flame retardant crosslinkable EPR insulation compound. It is formulated to obtain balanced performance characteristics with excellent electrical properties, outstanding ozone resistance, flexibility, thermal stability and flame retardancy. Superohm® 3443 is a colorable polymeric composition based on ethylene propylene rubber (EPR) containing peroxide curing agent. In a free flowing pellet form, this compound is ready for extrusion in a conventional CV extrusion line.

EXTINITY® 0211-301 is a highly loaded antimony oxide concentrate in an EPDM carrier resin. The antimony oxide content in EXTINITY® 0211-301 is 80% by weight. All SACO AEI Polymers flame retardant concentrates are much more easily dispersed and therefore provide resultant materials with superior physical properties and flame resistance versus the use of additives in their naturally occurring state.

PEXIDAN® SX554 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM493, in the ratio 95:5, or CM497, in the ratio between 90:10 and 93:7.CM493 is a stronger catalyst suitable for wall thicknesses > 1.5mm and CM497 is a weaker catalyst suitable for small conductor sizes, such as 1 to 4 mm2. The system SX554:CM493 or SX554:CM497, has been approved for use at 1kV and has found uses up to 10kV, it is highly flexible and enables the production of soft rubber cables without the use of continuous vulcanization equipment. Crosslinking is obtained by exposure to moist or hot water immersion only.

PEXIDAN® SX505NT pre-grafted base is mixed with a crosslinking catalyst masterbatch CM493 or CM497, in the ratio 95:5. The SX505NT:CM493 or SX505NT:CM497 systems have passed type-tests for use up to and including 36 kV. The graft compound contains a non-staining stabilizer and an effective tree retarder, giving outstanding long term retention of dielectric strength. This compound is typically used in conjunction with crosslinkable semi-conducting material for conductor and insulation shields. Crosslinking is obtained by exposure to moist or hot water immersion only.

A High Ethylene, Low Viscosity Polymer with High Green Strength for Wire and Cable Applications

A High Ethylene, Low Viscosity Polymer with High Green Strength for Wire and Cable Applications

A High Ethylene Polymer with Good Green Strength for Wire and Cable and Extruded Profiles

JSR EP11 is low Mooney viscosity and low ethylene type.