Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Elastomers
Thermoset Elastomers
Products in Thermoset Elastomers: Synthetic Rubber (unspecified)
34 Products found in Thermoset Elastomers
Browse
Applications
Show All 5 Categories
Filters
Suppliers
Applications
Polymer Name
End Uses
Processing Methods
Products
Brands
Suppliers
Formulations
Documents
Relevance
Momentive Performance Materials
Addisil™ 2080 E
Applications:
Equipment & Parts, Cooling & Climate, Appliances & Electronics
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Polymer Name:
Synthetic Rubber (unspecified)
End Uses:
Food Preparation Equipment, Tubing, Industrial Applications
The Addisil™ 2080 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80 Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits Good transparency, no yellowing Good mechanical performance Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf life of 6 months for the single components if stored appropriatelyM Very long pot life of 2 to 4 weeks for the mixed components Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations KTW: German Water Regulation. A representative sample has passed the test for tubes, fittings, seals and strorage systems (cold and warm) WRAS (BS 6920). A representative sample has passed the test (cold and warm) W270: Microbiological growth test. A representative sample has passed the test.
Momentive Performance Materials
Addisil™ 450 E
Applications:
Surgical Instruments & Trays, Medical Devices & Assemblies, Cooling & Climate
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Polymer Name:
Synthetic Rubber (unspecified)
End Uses:
Surgical Instruments, Medical Devices, Medical/Healthcare Applications
The Addisil™ 450 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacture.
Momentive Performance Materials
Addisil™ 460 E
Applications:
Surgical Instruments & Trays, Medical Devices & Assemblies, Cooling & Climate
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Polymer Name:
Synthetic Rubber (unspecified)
End Uses:
Surgical Instruments, Medical Devices, Medical/Healthcare Applications
The Addisil™ 460 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacture.
Precision Polymer Engineering
Precision Polymer™ A75H
Polymer Name:
Synthetic Rubber (unspecified)
Features:
Oil Resistant, Steam Resistant, Acid Resistant
Tetrafluoroethylene/Propylene (TFE/P) Rubber, 75-80 °IRHD. Copolymer of tetrafluoroethylene and propylene. Formulated using Aflas® FA-100H. Aflas® is a registered trademark of Asahi Glass.Excellent resistance to acids, steam, hot water, brine, oils, lubricants and sour oil/gas (H2S). Resistant to all types of hydraulic fluids (including alkyl-aryl phosphate esters), all brake fluids (glycol, mineral and silicone base), amine corrosion inhibitors and additive packages.
Momentive Performance Materials
Silopren™ Electro 1700
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Polymer Name:
Synthetic Rubber (unspecified)
The Silopren™ Electro 1700 are one-component heat curable rubber materials for making elastomers (HCE) with a hardness of 70 and 77 Shore A. These silicone rubbers are based on a platinum cure system, especially developed for the manufacture of housing and weather sheds for all kinds of insulators.Key Features and Benefits One-component, ready to use Fast vulcanisation/addition curing system Outstanding aging behavior and weather resistance Fast hydrophobicity transfer and hydrophobicity recovery Excellent dielectric behavior over a wide range of temperatures Very good tracking resistance- Shelf life of 3 months from date of manufacturing.
Precision Polymer Engineering
Precision Polymer™ A85H
Polymer Name:
Synthetic Rubber (unspecified)
Features:
Oil Resistant, Steam Resistant, Acid Resistant
Tetrafluoroethylene/Propylene (TFE/P) Rubber, 85-90 °IRHD. Copolymer of tetrafluoroethylene and propylene. Formulated using Aflas® FA-100H. Aflas® is a registered trademark of Asahi Glass.Excellent resistance to acids, steam, hot water, brine, oils, lubricants and sour oil/gas (H2S). Resistant to all types of hydraulic fluids (including alkyl-aryl phosphate esters), all brake fluids (glycol, mineral and silicone base), amine corrosion inhibitors and additive packages.
Momentive Performance Materials
Addisil™ IND 1070 E
Applications:
Equipment & Parts, Cooling & Climate, Appliances & Electronics
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Polymer Name:
Synthetic Rubber (unspecified)
End Uses:
Food Preparation Equipment, Non Specific Food Applications, Industrial Applications
The Addisil™ IND 1070 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80° Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months as of manufacturing date Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.
Momentive Performance Materials
Addisil™ 452 E
Applications:
Surgical Instruments & Trays, Medical Devices & Assemblies, Cooling & Climate
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Polymer Name:
Synthetic Rubber (unspecified)
End Uses:
Surgical Instruments, Medical Devices, Tubing
The Addisil™ 452 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf-life of 6 months for the single component if stored appropriately Very long pot life of 2 to 4 weeks for the mixed components.
Momentive Performance Materials
Addisil™ IND 2050 E
Applications:
Equipment & Parts, Cooling & Climate, Appliances & Electronics
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Polymer Name:
Synthetic Rubber (unspecified)
End Uses:
Food Preparation Equipment, Non Specific Food Applications, Industrial Applications
The Addisil™ IND 2050 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80 Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits Good transparency, no yellowing Good mechanical performance Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf life of 6 months for the single components if stored appropriatelyM Very long pot life of 2 to 4 weeks for the mixed components Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.
Momentive Performance Materials
Addisil™ 462 E
Applications:
Surgical Instruments & Trays, Medical Devices & Assemblies, Cooling & Climate
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Polymer Name:
Synthetic Rubber (unspecified)
End Uses:
Surgical Instruments, Medical Devices, Medical/Healthcare Applications
The Addisil™ 462 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf-life of 6 months for the single component if stored appropriately Very long pot life of 2 to 4 weeks for the mixed components.
Momentive Performance Materials
Addisil™ IND 1080 E
Applications:
Equipment & Parts, Cooling & Climate, Appliances & Electronics
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Polymer Name:
Synthetic Rubber (unspecified)
End Uses:
Food Preparation Equipment, Non Specific Food Applications, Industrial Applications
The Addisil™ IND 1080 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80° Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months as of manufacturing date Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.
Momentive Performance Materials
Addisil™ 482 E
Applications:
Surgical Instruments & Trays, Medical Devices & Assemblies, Cooling & Climate
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Polymer Name:
Synthetic Rubber (unspecified)
End Uses:
Surgical Instruments, Medical Devices, Medical/Healthcare Applications
The Addisil™ 482 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf-life of 6 months for the single component if stored appropriately Very long pot life of 2 to 4 weeks for the mixed components.
Momentive Performance Materials
Addisil™ IND 2060 E
Applications:
Equipment & Parts, Cooling & Climate, Appliances & Electronics
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Polymer Name:
Synthetic Rubber (unspecified)
End Uses:
Food Preparation Equipment, Industrial Applications, Non Specific Food Applications
TheAddisil™ IND 2060 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80 Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits Good transparency, no yellowing Good mechanical performance Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf life of 6 months for the single components if stored appropriatelyM Very long pot life of 2 to 4 weeks for the mixed components Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.
Momentive Performance Materials
Addisil™ 2070 E
Applications:
Equipment & Parts, Cooling & Climate, Appliances & Electronics
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Polymer Name:
Synthetic Rubber (unspecified)
End Uses:
Food Preparation Equipment, Industrial Applications, Non Specific Food Applications
Addisil™ 2070 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80 Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits Good transparency, no yellowing Good mechanical performance Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf life of 6 months for the single components if stored appropriatelyM Very long pot life of 2 to 4 weeks for the mixed components Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations KTW: German Water Regulation. A representative sample has passed the test for tubes, fittings, seals and strorage systems (cold and warm) WRAS (BS 6920). A representative sample has passed the test (cold and warm) W270: Microbiological growth test. A representative sample has passed the test.
Momentive Performance Materials
Addisil™ 442 E
Applications:
Surgical Instruments & Trays, Medical Devices & Assemblies, Cooling & Climate
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Polymer Name:
Synthetic Rubber (unspecified)
End Uses:
Surgical Instruments, Medical Devices, Medical/Healthcare Applications
The Addisil™ 442 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf-life of 6 months for the single component if stored appropriately Very long pot life of 2 to 4 weeks for the mixed components.
Momentive Performance Materials
Addisil™ 440 E
Applications:
Surgical Instruments & Trays, Medical Devices & Assemblies, Cooling & Climate
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Polymer Name:
Synthetic Rubber (unspecified)
End Uses:
Surgical Instruments, Medical Devices, Medical/Healthcare Applications
The Addisil™ 440 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacture.
Momentive Performance Materials
Addisil™ 2050 E
Applications:
Equipment & Parts, Cooling & Climate, Appliances & Electronics
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Polymer Name:
Synthetic Rubber (unspecified)
End Uses:
Food Preparation Equipment, Non Specific Food Applications, Industrial Applications
Addisil™ 2050 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80 Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits Good transparency, no yellowing Good mechanical performance Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf life of 6 months for the single components if stored appropriatelyM Very long pot life of 2 to 4 weeks for the mixed components Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations KTW: German Water Regulation. A representative sample has passed the test for tubes, fittings, seals and strorage systems (cold and warm) WRAS (BS 6920). A representative sample has passed the test (cold and warm) W270: Microbiological growth test. A representative sample has passed the test.
Precision Polymer Engineering
Precision Polymer™ A95H
Polymer Name:
Synthetic Rubber (unspecified)
Features:
Oil Resistant, Steam Resistant, Acid Resistant
Tetrafluoroethylene/Propylene (TFE/P) Rubber, 90-98°IRHD. Copolymer of tetrafluoroethylene and propylene. Formulated using Aflas® FA-100H. Aflas® is a registered trademark of Asahi Glass.Excellent resistance to acids, steam, hot water, brine, oils, lubricants and sour oil and gas (H2S). Resistant to all types of hydraulic fluids (including alkyl-aryl phosphate esters), all brake fluids (glycol, mineral and silicone base), amine corrosion inhibitors and additive packages. Resistant to explosive decompression, high pressure and gas (i.e. CO2 ) blistering.
Axion Polymers
Axplas® Rubber52 0000
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Polymer Name:
Synthetic Rubber (unspecified)
Rubber52 0000 Rubber GranulesAxplas® Rubber52 0000 rubber grade is a mix of clean, washed granular chips rich in rubber with regular particle size. Minor quantities of polymers and wood are present. Please note the composition chart is a typical result and that all material fractions may vary by a few percent around the numbers shown in the pie chart.Produced from 100% recycled content, this product offers a range of user benefts, including: Low carbon input can reduce your carbon footprint Environmental gains from resource effciency Cost savings on raw materials Applications: Feedstock material Plastics wood manufacture Blending agent of filler for mixed plastic products Manufacture of panels, sheets and boards
Momentive Performance Materials
Addisil™ 160 E
Applications:
Surgical Instruments & Trays, Medical Devices & Assemblies, Cooling & Climate
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Polymer Name:
Synthetic Rubber (unspecified)
End Uses:
Surgical Instruments, Medical Devices, Medical/Healthcare Applications
Addisil™ 160 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 70 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacturing.
Momentive Performance Materials
Addisil™ 472 E
Applications:
Surgical Instruments & Trays, Medical Devices & Assemblies, Cooling & Climate
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Polymer Name:
Synthetic Rubber (unspecified)
End Uses:
Surgical Instruments, Medical Devices, Medical/Healthcare Applications
The Addisil™ 472 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf-life of 6 months for the single component if stored appropriately Very long pot life of 2 to 4 weeks for the mixed components.
Momentive Performance Materials
Addisil™ IND 1050 E
Applications:
Equipment & Parts, Cooling & Climate, Appliances & Electronics
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Polymer Name:
Synthetic Rubber (unspecified)
End Uses:
Food Preparation Equipment, Tubing, Non Specific Food Applications
The Addisil™ IND 1050 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80° Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months as of manufacturing date Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.
Momentive Performance Materials
Addisil™ 140 E
Applications:
Surgical Instruments & Trays, Medical Devices & Assemblies, Cooling & Climate
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Polymer Name:
Synthetic Rubber (unspecified)
End Uses:
Surgical Instruments, Medical Devices, Medical/Healthcare Applications
The Addisil™ 140 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 70 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacturing.
Precision Polymer Engineering
Precision Polymer™ A70H
Polymer Name:
Synthetic Rubber (unspecified)
Features:
Oil Resistant
Tetrafluoroethylene/Propylene (TFE/P) Rubber, 70-75 °IRHD. Copolymer of tetrafluoroethylene and propylene. Formulated using Aflas® FA-100H. Aflas® is a registered trademark of Asahi Glass.Excellent resistance to oils, lubricants and sour oil and gas (H2S). Resistant to all types of hydraulic fluids (including alkyl-aryl phosphate esters), all brake fluids (glycol, mineral and silicone base), amine corrosion inhibitors and additive packages.
Momentive Performance Materials
Addisil™ 2060 E
Applications:
Equipment & Parts, Cooling & Climate, Appliances & Electronics
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Polymer Name:
Synthetic Rubber (unspecified)
End Uses:
Food Preparation Equipment, Non Specific Food Applications, Industrial Applications
Addisil™ 2060 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80 Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits Good transparency, no yellowing Good mechanical performance Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf life of 6 months for the single components if stored appropriatelyM Very long pot life of 2 to 4 weeks for the mixed components Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations KTW: German Water Regulation. A representative sample has passed the test for tubes, fittings, seals and strorage systems (cold and warm) WRAS (BS 6920). A representative sample has passed the test (cold and warm) W270: Microbiological growth test. A representative sample has passed the test.
Momentive Performance Materials
Addisil™ 480 E
Applications:
Surgical Instruments & Trays, Medical Devices & Assemblies, Cooling & Climate
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Polymer Name:
Synthetic Rubber (unspecified)
End Uses:
Surgical Instruments, Medical Devices, Medical/Healthcare Applications
The Addisil™ 480 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacture.
Momentive Performance Materials
Addisil™ 60 Xray
Applications:
Surgical Instruments & Trays, Medical Devices & Assemblies, Cooling & Climate
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Polymer Name:
Synthetic Rubber (unspecified)
End Uses:
Surgical Instruments, Medical Devices, Tubing
The Addisil™ 60 Xray is a one-component heat curable rubber for making elastomers (HCE) with a hardness of 60 Shore A for medical applications. This compound is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacture.
Momentive Performance Materials
Addisil™ 470 E
Applications:
Surgical Instruments & Trays, Medical Devices & Assemblies, Cooling & Climate
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Polymer Name:
Synthetic Rubber (unspecified)
End Uses:
Surgical Instruments, Medical Devices, Medical/Healthcare Applications
The Addisil™ 470 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacture.
Momentive Performance Materials
Addisil™ 170 E
Applications:
Cooling & Climate, Appliances & Electronics, Fuel Systems
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Polymer Name:
Synthetic Rubber (unspecified)
End Uses:
Medical/Healthcare Applications, Tubing
Addisil™ 170 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 70 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.
Momentive Performance Materials
Silopren™ Electro 1800
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Polymer Name:
Synthetic Rubber (unspecified)
The Silopren™ Electro 1800 are one-component heat curable rubber materials for making elastomers (HCE) with a hardness of 70 and 77 Shore A. These silicone rubbers are based on a platinum cure system, especially developed for the manufacture of housing and weather sheds for all kinds of insulators.Key Features and Benefits One-component, ready to use Fast vulcanisation/addition curing system Outstanding aging behavior and weather resistance Fast hydrophobicity transfer and hydrophobicity recovery Excellent dielectric behavior over a wide range of temperatures Very good tracking resistance- Shelf life of 3 months from date of manufacturing.
Momentive Performance Materials
Addisil™ IND 2080 E
Applications:
Equipment & Parts, Cooling & Climate, Appliances & Electronics
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Polymer Name:
Synthetic Rubber (unspecified)
End Uses:
Food Preparation Equipment, Tubing, Non Specific Food Applications
The Addisil™ IND 2080 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80 Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits Good transparency, no yellowing Good mechanical performance Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf life of 6 months for the single components if stored appropriatelyM Very long pot life of 2 to 4 weeks for the mixed components Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.
Momentive Performance Materials
Addisil™ IND 2070 E
Applications:
Equipment & Parts, Cooling & Climate, Appliances & Electronics
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Polymer Name:
Synthetic Rubber (unspecified)
End Uses:
Food Preparation Equipment, Non Specific Food Applications, Industrial Applications
The Addisil™ IND 2070 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80 Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits Good transparency, no yellowing Good mechanical performance Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf life of 6 months for the single components if stored appropriatelyM Very long pot life of 2 to 4 weeks for the mixed components Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.
Momentive Performance Materials
Addisil™ 150 E
Applications:
Surgical Instruments & Trays, Medical Devices & Assemblies, Cooling & Climate
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Polymer Name:
Synthetic Rubber (unspecified)
End Uses:
Surgical Instruments, Medical Devices, Medical/Healthcare Applications
Addisil™ 150 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 70 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacturing.
Momentive Performance Materials
Addisil™ IND 1060 E
Applications:
Equipment & Parts, Cooling & Climate, Appliances & Electronics
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Polymer Name:
Synthetic Rubber (unspecified)
End Uses:
Food Preparation Equipment, Non Specific Food Applications, Industrial Applications
The Addisil™ IND 1060 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80° Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months as of manufacturing date Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.