Products in Additives: Mixtures & Blends

Synative® AC AMH 2 is employed in the industrial sector, specifically in chemical and industrial manufacturing applications. Its primary use is in fluids and lubricants, specifically within the category of metalworking fluids. Synative® AC AMH 2 is in a liquid physical form, making it well-suited for various processes and applications within the metalworking industry.

MULSIFAN polyethylene glycol and polypropylene glycol esters provide excellent nonionic water and oil emulsifying properties in hard and soft water with low foaming tendency. MULSIFAN ethers are also excellent nonionic surfactants, coupling and wetting agents. A wide range of HLB values are available to meet the formulation requirements of metalworking fluids and water-based hydraulic fluids. These products are also widely used as surfactants and dispersants for industrial cleaners, degreasers, personal care and cosmetic applications

INTERCOOL® R-4441 inhibitors is designed to reestablish proper levels of corrosion inhibitors and pH buffers in an existing glycol fluid. Over time, the corrosion inhibitor and pH buffer levels of an inhibited glycol fluid will slowly become depleted. R-Series inhibitors will replenish the critical levels of corrosion inhibitors and pH buffers to ensure proper long-term corrosion protection.

Nanol® is a patented discovery and represents an innovative lubricant additive, which significantly reduces friction and wear of surfaces due to a thin protective layer formed by copper nanoparticles.Nanol Power+ T:Reduces frictionReduces wearCuts down emissionsSaves fuelProlongs lifetime of componentsImproves machinery efficiencyNanol® POWER+ T is optimized for commercial and passenger vehicles. Only 3% of Nanol® POWER+ T is added to lubricant oil from engine oil reservoir and by that our customer have witness 2-6% reduction in fuel consumption.The unique action behind the Nanol® lubrication technology lies within the precise amount of perfectly distributed copper nanoparticles, constructing a physical layer of copper atoms only on the surfaces of friction and wear.

K-CORR® G-1086A is a proprietary rust inhibitor system developed for industrial and automotive greases.

A specially blended, highly effective, non-silicone oil-based anti-foam agent. It is used in very small quantities where foaming has become a problem.

Nanol® is a patented discovery and represents an innovative lubricant additive, which significantly reduces friction and wear of surfaces due to a thin protective layer formed by copper nanoparticles.Nanol® POWER+ MH is optimized for Marine engines operating with high sulfur fuel oil. With only 3 % of Nanol® POWER+ ML in lubricant our customers have witness 2-6% fuel savings.Nanol Power+ ML:Reduces frictionReduces wearCuts down emissionsSaves fuelProlongs lifetime of componentsImproves machinery efficiencyThe unique action behind the Nanol® lubrication technology lies within the precise amount of perfectly distributed copper nanoparticles, constructing a physical layer of copper atoms only on the surfaces of friction and wear.

K-CORR® 1227 (formerly KX1227) is an oil soluble, liquid corrosion preventive additive that is designed to be used with NA-SUL®Â® corrosion inhibitors to boost performance for difficult applications. It improves performance in humidity, salt fog and especially where corrosive residues of combustion form on metal surfaces.

Reductol is a blend of multifunctional fatty esters and soaps as well as surfactants designed to eliminate and prevent all types of coolant borne odors including sulfide and the musty odors created by shorter chained fatty acids. The specially formulated surfactants in Reductol also aid in the chemical breakdown of the biofilm, the nest where bacteria and fungi grow and breed, allowing it to be carried out with the chips or filtration equipment, thereby providing a bio-stable metalworking fluid. Reductol does not contain any heavy metals in the formulation and is easily waste treated by all current methods.

RIANOX® L64 is a mixture of aminic and high molecular weight phenolic antioxidant for lubricants.

TemProTAC is a special inhibitor formulation serving as main component for water borne corrosion protection products, rinsing fluids or cleaning bath. The main advantage is that you have corrosion protection during and after the actual process.

RIANOX® L150 is a mixture of aminic and high molecular weight phenolic antioxidant for lubricants

Nanol® is a patented discovery and represents an innovative lubricant additive, which significantly reduces friction and wear of surfaces due to a thin protective layer formed by copper nanoparticles.Nanol® POWER+ ML is optimized for Marine engines operating with low sulfur fuel oils. With only 3 % of Nanol® POWER+ ML in lubricant our customers have witness 2-6% fuel savings.Nanol Power+ ML:Reduces frictionReduces wearCuts down emissionsSaves fuelProlongs lifetime of componentsImproves machinery efficiencyThe unique action behind the Nanol® lubrication technology lies within the precise amount of perfectly distributed copper nanoparticles, constructing a physical layer of copper atoms only on the surfaces of friction and wear

NA-LUBE® AW-6220 is an ashless antiwear additive with excellent rust and corrosion inhibition and yellow metal deactivation properties.

Nanol® is a patented discovery and represents an innovative lubricant additive, which significantly reduces friction and wear of surfaces due to a thin protective layer formed by copper nanoparticles.Nanol® POWER+ E is optimized for Power generation units.The unique action behind the Nanol® lubrication technology lies within the precise amount of perfectly distributed copper nanoparticles, constructing a physical layer of copper atoms only on the surfaces of friction and wear.

Ven-Fyber Medium™ is a premium blend of micronized, surface-modified organic fibers for the prevention and remediation of seepage loss to moderate whole fluid losses in drilling fluid applications. Ven-Fyber Medium™ is field proven around the world for the prevention and mitigation of seepage & moderate to severe whole fluid losses. Ven-Fyber Medium™ is composed of a blend of differing types of surface-modified micronized cellulosic fibers. The differing types and sizes of the source materials provide excellent bridging and matting of thief zones in the near well-bore formation for effective sealing and prevention of whole fluid losses.

Surmax®CS-8400 is a low foaming alkaline stable surfactant which is designed for application temperatures above 60°C.

Chemax EMX-1155 is designed for use in metal forming operations from stamping to deep draw applications. This material may comprise from 20–25% of a typical forming compound which would then be diluted to 5–50% based on severity of the operation.

Anchor Color And Chemical Liquid Brown 2 are used in transmission fluid, hydraulic fluid, greases, 2-cycle oils, candle waxes, and more. Whether it's for regulatory compliance of home heating oil, brand identification of lubricating oil, or our full line of acid dyes for use in coloring antifreeze and windshield washer fluid.

Surmax® CS-522 alkaline stable surfactants are soluble and stable in 30% sodium hydroxide and high levels of other alkaline builders. These surfactants are used to formulate alkaline detergent concentrates for metal cleaning, food plant cleaning, and transportation cleaning,. They can be used in liquid concentrates as well as in dry or powder formulations.

Chemal EM-500 is an excellent emulsifiers for mineral oil based systems. This product provides good blooming qualities which produce a highly stable oil in water emulsion.

DEFOAMER MC is Water extended non siliconewith EBSA and Silica. Defoamers fit into all major chemical markets and meet a wide variety of application needs. We manufacture the base ingredients that make up these defoamers, which allow us to be very low cost producer.

Surmax®CS-555 is an alkaline stable surfactant designed for formulating low foaming, liquid cleaner concentrates containing high levels of caustic and/or other alkaline compounds. Surmax®CS-555 exhibits optimum detergency and low foaming properties at low application temperatures (<60°C). This material is non-substantive to metal surfaces and is, therefore, ideally suited for pre-plating and pre-painting applications.

Ven-Fyber 201™ is the Original micronized, surface-modified, cellulose fiber derivative for use as a drilling fluid additive. Ven-Fyber 201™ is a premium blend of micronized, surface-modified organic fibers for the prevention and remediation of seepage loss in drilling fluid applications. Ven-Fyber 201™ has been engineered to seal the low pressure, depleted sands and micro-fractured shales encountered during drilling, work-over and completion operations.

Anchor Color And Chemical Liquid Orange M are used in transmission fluid, hydraulic fluid, greases, 2-cycle oils, candle waxes, and more. Whether it's for regulatory compliance of home heating oil, brand identification of lubricating oil, or our full line of acid dyes for use in coloring antifreeze and windshield washer fluid.

Anchor Color And Chemical Liquid Green M are used in transmission fluid, hydraulic fluid, greases, 2-cycle oils, candle waxes, and more. Whether it's for regulatory compliance of home heating oil, brand identification of lubricating oil, or our full line of acid dyes for use in coloring antifreeze and windshield washer fluid.

AIRONIL PEX is Predominantly EBSA with silica in Nap Oil/Surfactant Blend, meant to cut with water. Defoamers fit into all major chemical markets and meet a wide variety of application needs. We manufacture the base ingredients that make up these defoamers, which allow us to be very low cost producer.

Ven-Fyber Fine™ is a premium blend of micronized, surface modified organic fibers for the prevention and remediation of seepage loss in drilling fluid applications. Ven-Fyber Fine™ is field proven around the world for the prevention and mitigation of seepage losses to moderate whole fluid losses. Ven-Fyber Fine™ has been engineered to seal the low pressure, depleted sands and micro fractured shales encountered during drilling, work-over and completion operations.

Maxlube 155 is a water insoluble ester which imparts lubricity and emulsification to metalworking formulations. Recommended use level is 1 – 2%.

Maxlube 450X is used in water reducible synthetic metal working fluids. In combination with alkanolamines, non-nitrate corrosio inhibitors like Maxhib AB-400 and Maxhib AB-451, biocides, and other water soluble additives can produce synthetic coolants that provide exceptional performance

Chemax EM-1169 was specifically designed for the production of stable emulsions of vegetable oils, especially for the preparation of soybean oil emulsions.

Ven-Trol 401™ is a multipurpose drilling fluid additive designed to stabilize shale, prevent cuttings dispersion and provide lubricity in both water and oil base muds. Ven-Fyber 401™ is designed to reduce problems associated with drilling fluid sensitive shales. Ven-Trol 401™ incorporate an oil dispersible resin on a micronized cellulose fiber. The fibrous base provides a significant increase in seepage loss control, thereby improving the shale stabilizing capabilities of the oil dispersible resin. A Single Sack Asphalt/MCF blend for HTHP fluid loss, seepage loss control and shale stabilization.

Surmax® CS-515 is an alkaline stable surfactant which is ideally suited for removal of oils and particulates at temperatures below 140° F. Due to a moderate foam generation, Surmax® CS-515 is ideally suited to soak cleaner applications

Anchor Color And Chemical Liquid Orange 2 are used in transmission fluid, hydraulic fluid, greases, 2-cycle oils, candle waxes, and more. Whether it's for regulatory compliance of home heating oil, brand identification of lubricating oil, or our full line of acid dyes for use in coloring antifreeze and windshield washer fluid.

Surmax® CS-504 is an alkaline stable surfactant that imparts moderate foaming characteristics in liquid cleaner concentrates. For application and formulation data, please refer to the Surmax®CS Series Brochure.

Maxbase 190 provides to easy formulating of soluble oils with high concentrations of chlorinated paraffins and sulfur and is also effective when cold water has to be used. Provides excellent emulsification with additive levels as low as 15%