Products in Additives: Sulfonic Acids & Derivatives

STEPAN® MWA-110 is a sulfonate that is used in metalworking applications. STEPAN® MWA-110 is used in the emulsification of components in metalworking formulations. It can act as a coupling agent for several components in soluble oils, semi-synthetic fluids, and synthetic fluids.

Syncal™ N57C and N57HF are cost efficient mid-base calcium sulfonates that will lend detergent, dispersant, acid neutralizing, and corrosion inhibiting characteristics to a variety of rust preventives and lubricants. The dispersed soluble CaCO3 helps to neutralize acids, such as HCl, thereby enhancing rust inhibiting characteristics when used in combination with other EP/AW additives like chlorinated paraffin.

Jalpon™ 1200A is a solvent free, gelled calcium sulfonate compound in a mineral oil diluent. It is designed to allow the easy formulation of solvent-free rust preventives, lubricants, and coatings. Jalpon™ 1200A will deposit an oily film. Jalpon™ 1200A contains a wax component for improved film integrity and resistance to water in thin film applications. Jalpon™ 1200A is easily emulsified for use in waterborne rust preventives and coatings.

LUBIMAX® 411H is a premium quality, over-based calcium sulfonate TBN Booster additive that is typically used as a detergent and rust inhibitor in crankcase lubricants with suitable base stocks. Compared to other products from the same family, LUBIMAX® 411H enjoys lighter color and lower haziness, with strong acid neutralizing ability, detergency and dispersion effects as well as anti-rust performance. The product compatibility is tested and approved with Base Oil Group I, II, III & IV. In addition, it has excellent high temperature and hydrolytic stability.

Jalpon™ 1250 is a lower viscosity thixotropic overbased calcium sulfonate designed for use as an additive in oils for metal removal and forming operations including metal stamping and drawing, as well as in other machining oils such as neat and soluble oils.

Neutral Calcium Sulfonates Syncal™ 45LC are dispersant type, oil soluble, slightly alkaline calcium sulfonates. These products impart excellent rust and corrosion inhibiting properties due to their high molecular weight and low salt content. All have characteristically low chloride contents due to the nature of the manufacturing process. Syncal™ 45LC is especially low with a maximum chloride value of 50 ppm guaranteed.

Syncal™ N57C and N57HF are cost efficient mid-base calcium sulfonates that will lend detergent, dispersant, acid neutralizing, and corrosion inhibiting characteristics to a variety of rust preventives and lubricants. The dispersed soluble CaCO3 helps to neutralize acids, such as HCl, thereby enhancing rust inhibiting characteristics when used in combination with other EP/AW additives like chlorinated paraffin.

Synbar™ N58 is a neutral barium sulfonate with a very low base number. The high active content of Synbar™ N58 offers the formulator more flexibility and superior wetting and demulsibility characteristics. It is an extremely good rust and corrosion inhibitor for any lubricant and coating application where improved performance is needed.

Branched Sodium Sulfonate Synsul™ 455BR is a unique medium molecular weight sodium sulfonate derived from a branched alkylate. This product is easily formulated into soluble oil bases, semi-synthetic fluids and other metalworking compounds as an emulsifier and rust inhibitor. The branched structure aids in inherent bio-stability. Therefore, fluids derived from Synsul™ 455BR may exhibit longer fluid life than those formulated with either linear or natural sodium sulfonates.

Jalpon™ 1200 is a solvent free, gelled calcium sulfonate in a mineral oil diluent. It is designed to allow for the easy formulation of solvent-free rust preventives, lubricants, and coatings. Jalpon™ 1200 deposits an oily film. It is also easily emulsified for use in waterborne rust preventives and coatings.

Syncal™ OB407PAO is a specialty overbased calcium sulfonate that is designed for use in applications where the benefits of PAO are desired. The calcium-to-sulfonate ratio is optimized for good compatibility with other componentry. The product lends itself to a variety of applications including those where low temperature properties are needed. Syncal™ OB407PAO is a good choice for overbased calcium sulfonate grease feed. The high TBN offers good acid neutralizing and rust and corrosion inhibiting characteristics. This product can be considered as a component in a variety of lubricating oils and greases, coatings, rust preventives, metalworking fluids, and automotive lubricants.

NA-SUL® MG-HT is a high performance rust and corrosion inhibitor offering exceptional rust protection with outstanding high temperature stability and good demulsibility.

NA-SUL® CA-1089 is a premium rust inhibitor for petroleum and synthetic lubricants, rust preventive fluids and metalworking specialties. It provides outstanding non-staining properties with excellent demulsibility and filterability, both dry and wet. It is compatible with a wide range of additives and base stocks.

Synbar™ N50HF is a first intent, neutral barium sulfonate designed to provide excellent demulsibility, detergency, and optimal non-staining rust protection. It is ideal for applications where superior rust and corrosion protection are needed. Synbar™ N50HF exhibits good compatibility with most mineral base oils, white oils, and synthetic base stocks.

NA-SUL® DTA is a stable, ashless, oil soluble, water insoluble rust and corrosion inhibitor displaying good demulsibility.

Synbar™ N50 (Neutral) is first intent dispersant type, oil soluble barium sulfonates. These products impart excellent water separation and rust and corrosion inhibiting properties while maintaining low-staining characteristics due to their high molecular weight, polarity, and low chloride content.

Syncal™ N50HF are dispersant type, oil soluble, slightly alkaline calcium sulfonates. These products offer excellent rust and corrosion inhibiting properties. The high polarity of Syncal™ N50HF impart excellent water displacing characteristics to a variety of formulated products.

Syncal™ OB408 is multifunctional specialty overbased calcium sulfonates manufactured from long chain alkylbenzene sulfonic acids. These products exhibit good oil solubility, detergency, and excellent high temperature stability. Not only are these products good TBN boosters, they are also excellent feedstocks for manufacturing overbased calcium sulfonate grease. Greases manufactured from either Syncal™ OB408 tend to convert readily and exhibit outstanding gel strength retention properties.

Syncal™ OB403 and OB408 are multifunctional specialty overbased calcium sulfonates manufactured from long chain alkylbenzene sulfonic acids. These products exhibit good oil solubility, detergency, and excellent high temperature stability. Not only are these products good TBN boosters, they are also excellent feedstocks for manufacturing overbased calcium sulfonate grease. Greases manufactured from either Syncal™ OB403 or OB408 tend to convert readily and exhibit outstanding gel strength retention properties.

Syncal™ OB411 is an economical overbased calcium sulfonate that will lend detergent/dispersant, acid neutralizing, and rust and corrosion inhibiting characteristics to a variety of lubricating oils and greases, rust preventives and metalworking fluids. Nominal dosages would range from 0.50 to 5.0% (Wt.) of the finished lubricant. This product is compatible with most mineral base oils, white oils, and synthetic base stocks and is a good choice for crankcase applications.

NA-SUL® CA-1259 is a high performance liquid rust and corrosion inhibitor for rust preventives and dewatering fluids. It offers excellent solubility in a wide range of mineral oils, esters and vegetable oils. NA-SUL® CA-1259 is less viscous than many other additives of its type and may often be able to be cold blended into oils. This results in lower energy cost and faster processing. NA-SUL® CA-1259 has an exceptional ability to help to separate water from oil and oil/solvent solutions making it very suitable for dewatering fluid applications. The solubility of NA-SUL® CA-1259 should be verified in the diluents that are being considered for use.

Synbar™ OB70 (Overbased) is first intent dispersant type, oil soluble barium sulfonates. These products impart excellent water separation and rust and corrosion inhibiting properties while maintaining low-staining characteristics due to their high molecular weight, polarity, and low chloride content.

NA-SUL® CA-1183 is a liquid corrosion preventive additive designed for use where water contact is likely such as dewatering fluids. NA-SUL® CA-1183 provides excellent corrosion protection for steel, galvanized steel and aluminum with superior water separation characteristics.

LUBIMAX® 411E is a general-purpose premium quality, over-based calcium sulfonate TBN Booster additive that is typically used as a detergent and rust inhibitor in crankcase lubricants with suitable base stocks. LUBIMAX® 411E has a strong acid neutralizing ability, detergency, and dispersion effects as well as anti-rust performance. In addition, it has excellent high temperature and hydrolytic stability.The product compatibility is tested and approved in Base Oil Group I and II.

NA-SUL® CA-50 is a premium non-staining rust and corrosion inhibitor with excess alkalinity in the form of oil-soluble calcium carbonate.

NA-SUL® EDS is an ashless rust and corrosion inhibitor used in a wide variety of fuels and lubricants.

Oleum Sulfonated Synthetic Sodium Sulfonates Synsul™ 415, 450, and 500 are oil soluble, oleum sulfonated synthetic sodium sulfonates. Synsul™ 415 and 450 have good affinity for water making them excellent components in emulsifier packages. Synsul™ 500 displaces water, making it a good rust and corrosion inhibitor component.

K-Amide™ X-1011 is a versatile, low-foaming rust and corrosion inhibitor for use in metalworking fluids, alkaline cleaners, and water-based quenching fluids. K-Amide™ X-1011 exhibits good compatibility with sulfonates, PIBSAs and other products as part of metalworking formulary. The non-tacky films of K-Amide™ X-1011 are easily removed with alkaline cleaners. K-Amide™ X-1011 is non-staining to yellow metals and can be used as a component of soluble oils as well as synthetic and semi-synthetic fluids. K-Amide™ X-1011 offers excellent cast iron chip test results at low concentrations.

NA-SUL® 420 is an easily emulsifiable rust preventive concentrate ideally suited for the protection of metal parts during storage.

Syncal™ OB400 is specialty overbased calcium sulfonates that will lend detergent/dispersant, acid neutralizing, and rust and corrosion inhibiting characteristics to a variety of lubricants, greases, industrial oils, rust preventives, and metalworking fluids. Syncal™ OB400 is excellent feedstocks for the manufacture of overbased calcium sulfonate greases and gelled coatings.

NA-SUL® CA-HT3 is a high performance rust and corrosion inhibitor offering exceptional rust protection with outstanding high temperature stability and good demulsibility. Contamination with large amounts of water should be avoided1 (e.g. rust preventive dewatering application).

NA-SUL® CA/W1177 is an additive developed for use where water contact is likely such as dewatering fluids. NA-SUL® CA/W1177 combines excellent corrosion protection for steel with good water separation characteristics.

NA-SUL® BSB is a premium non-staining rust and corrosion inhibitor with excess alkalinity in the form of barium hydroxide.

Synbar™ OB70HF is a cost effective overbased barium sulfonate. This product will provide the formulator with excellent demulsibility, detergency, and optimal non-staining rust and corrosion protection, even under acidic conditions. Synbar™ OB70HF exhibits good compatibility with most mineral base oils, white oils, and synthetic base stocks.

Neutral Calcium Sulfonates Syncal™ N45H is dispersant type, oil soluble, slightly alkaline calcium sulfonates. These products impart excellent rust and corrosion inhibiting properties due to their high molecular weight and low salt content. All have characteristically low chloride contents due to the nature of the manufacturing process.

LUBIMAX® 411M is a high base magnesium sulfonate TBN Booster. It’s compatible with most mineral base oils, white oils and synthetic base stocks. LUBIMAX® 411M has a strong acid neutralizing ability, detergency & dispersion effects and antirust performance as well. It also has excellent stability at high temperature, oil stability, hydrolysis stability and water tolerance ability.