Products in Additives: Cutting Oils

Harcros Chemicals Antifoam AF 100 IND is a 100% active silicone compound that provides an efficient and economical means of preventing costly and dangerous foaming conditions in aqueous and non-aqueous systems. This product is primarily used in non-aqueous industrial applications where silica fillers can be tolerated.

Harcros Chemicals Antifoam 100 Food Grade is a 100% active silicone compound that provides an efficient and economical means of preventing costly and dangerous foaming conditions in aqueous and non-aqueous systems. It can be used in the manufacture of food packaging materials and as a direct food additive. This product exhibits excellent dilution stability when diluted with aliphatic, aromatic, and chlorinated solvents.

T-Mulz® A 181-4.5 PE is a complex organic phosphate ester that is compatible with anionic and nonionic surfactants. It is highly effective as a lubricant, wetting agent, corrosion inhibitor, dispersant or emulsifier and is often used in lubrication oils, polishing fluids and cutting fluids.

MASESTER® E1181 is a versatile ingredient with applications in many areas, including personal care and rubber. Employed as an emollient, emulsifier, and spreading agent in cosmetics, it also acts as a lubricant for makeup. Its applications extend to rubber as a plasticizer and food-contact paperboard as a defoamer.

ASCOTRAN® L is a water-based, organic concentrate corrosion inhibitor that is designed for ferrous and non-ferrous metals. This product is designed to be a complete replacement for oil-based preventives, providing indoor protection for metal equipment and components. When added to metalworking solutions, ASCOTRAN® L protects metals during both short and long immersion periods, ensuring comprehensive protection against corrosion.

ASCOTRAN® NSC is a ready-to-use, liquid-form, organic corrosion inhibitor that is designed for both ferrous and non-ferrous metals in contact with neutral-to-alkaline aqueous solutions. This product is specifically formulated to provide temporary protection against atmospheric corrosion, ensuring that your metal assets are safeguarded against corrosive conditions even when they are not in use.

Lanphos PE36, a potent emulsifier applicable across diverse polymer systems, is particularly valued as a primary emulsifier, eliminating the necessity for a secondary surfactant for system stabilization. It serves as the top preference for formulators due to its versatility. Apart from yielding remarkably small particle sizes, it incorporates an inherent stabilizer system, preventing polymer particle re-agglomeration.

Lanphos PE244 is a phosphate ester produced using phosphorous pentoxide, resulting in a product that comprises both mono- and di-esters. Lanphos PE244 offers a diverse range of surfactant properties, encompassing emulsification, dispersion, corrosion inhibition, lubrication, wetting, and foaming. Key features of Lanphos PE244 include its excellent stability in high concentrations of alkalis and electrolytes, as well as its exceptional detergency and emulsification capabilities.

Lanphos PE245 is a phosphate ester manufactured with phosphorous pentoxide, resulting in a product containing both mono- and di-esters. Its notable features include excellent stability in high concentrations of acid, alkali, and electrolytes. Supplied in free acid form, when neutralized, the product finds use in various applications such as textiles as a lubrication aid and/or emulsifier, metalworking cutting fluids (especially when amine neutralized), as well as in leather, household, IandI, agrochemicals, and emulsion polymerization.

P.A.T TT 50S (Sodium Tolyltriazole 50%) is a 43% active aqueous solution of methyl 1 H-benzotriazole (tolyltriazole), functioning as a corrosion inhibitor for copper and copper alloys. TT 50S forms a barrier film on the surface of copper, precipitating copper from solution and thereby providing galvanic corrosion protection for other metals. It finds use in various applications, including circulating cooling systems such as cooling towers, air conditioning systems, and cutting and grinding fluids. Additionally, it is applicable in functional fluids, corrosion preventative coatings, and cleaners.

Lanphos PE310 is a phosphate ester manufactured with phosphorous pentoxide and contains both mono and diesters. Its main advantage lies in its excellent stability in high concentrations of acid, alkali, and electrolyte. Key properties include hydrotrope, high electrolyte stability, and resistance to acids and alkalis.

Lanphos PE74 is a cetyl oleyl ethoxy phosphate with outstanding emulsification characteristics. Its key properties encompass being oil-soluble, exhibiting excellent emulsification characteristics, providing lubricity as an extreme pressure additive, functioning as a corrosion inhibitor, and featuring low foam characteristics. Applications for Lanphos PE74 include multifunctional metalworking fluid additives, extreme pressure additives, emulsifiers, corrosion inhibitors, metal cleaning, emulsion polymerization, and textile lubricants.

Lanphos PE35, a phosphate ester manufactured using phosphorous pentoxide and is characterized by excellent stability in high concentrations of acid, alkali, and electrolyte. Its key properties include acting as a hydrotrope, high electrolyte stability, and resistance to acids and alkalis.

Lanphos PET11 is a phosphate ester manufactured with phosphorous pentoxide, containing both mono- and di-esters. Its primary advantage lies in its excellent stability in high concentrations of acid, alkali, and electrolyte. This product finds applications in cutting fluids, leather processing, agrochemicals, emulsion polymerization, and pigment dispersion.

OMACIDE™ IPBC 20 Fungicide is a highly effective, fast acting antifungal agent based on the chemical active 3-iodopropynyl butylcarbamate (IPBC). It is a mild odor, amber colored liquid for use as a post treatment additive. This product is most effective when used in dilute soluble oil and semi-synthetic fluid systems. OMACIDE™ IPBC 20 Fungicide can be applied in metalworking, cutting, cooling, and lubricating fluids.

OMACIDE™ IPBC 40 Industrial Fungicide is a pungent aromatic, pale yellow to amber-colored liquid broad spectrum fungicide additive. It is used in architectural coatings, textiles, construction applications such as paints, stains, adhesives, caulks, and sealants, as well as plastic product applications to prevent dry film fungal growth. OMACIDE™ IPBC 40 Industrial Fungicide is also a very effective additive for controlling fungal growth in aqueous-based fluids such as inks and metalworking fluids.

DeTROPE CA - 100 is a liquid, anhydrous-modified carboxylate. It is suggested for use as a low-foaming hydrotrope in both aqueous and powdered alkaline systems.

DeCORE AFCI - 45 is an anionic, amine-free, water-soluble multi-metal corrosion inhibitor. It's recommended for safeguarding a range of metals, such as aluminum, copper, brass, bronze, steel, and cast iron, as well as ferrous and non-ferrous metals in aqueous systems. Additionally, DeCORE AFCI - 45 serves as a highly efficient hydrotrope for alkaline systems.

DeTERIC ODP - LF is a low-foaming sodium octyliminodipropionate primarily utilized for demulsification in water-based systems. Additionally, it demonstrates excellent hydrotroping properties in highly alkaline or acidic formulations.

DeCORE IMT - 100LF is a low-foaming, anionic, mixed amine carboxylate. It is recommended as a corrosion inhibitor for both ferrous and non-ferrous metals, offering effective protection while minimizing foam formation.

BIOTREND® SP40 is an industrial preservative containing sodium pyrithione as the active ingredient.

DePHOS 8028FA is an aliphatic phosphate ester in its acid form, derived from an ethoxylated alcohol.

DeCORE APCI - 95MOD is a low-foaming, water-soluble anionic corrosion inhibitor. It is employed to prevent rust on various metal surfaces and is recommended as a versatile corrosion inhibitor for copper, brass, magnesium, bronze, galvanized steel, cast iron, and other ferrous and non-ferrous metals.

DeCORE BE - 85 is a water-soluble, non-foaming amine borate corrosion inhibitor. It is highly effective on both ferrous and non-ferrous metals within neutral to mildly alkaline systems, including aerosol formulations.

TRIEST TMTO-0421, is a biodegradable and hydrolytically stable polyol ester formed by the reaction of trimethylol propane and a vegetable-based C18-rich fatty acid, which has a wide range of uses, improves product performance properties and adds functionality. It has applications in numerous fields like cutting fluids, steel rolling oils, greases and also in hot or cold rolling oils.

TRIEST CTMO-2511 K, is a heat resistant complex ester with high stability and viscosity, lubricity and hydrolytic stability, formed by the reaction of trimethylol propane and oleic acid. It has applications in multiple fields like metal working fluids, hydraulic fluids, cutting fluids

TRIEST TMTO-0612, is a biodegradable and hydrolytically stable polyol ester formed by the reaction of trimethylol propane and oleic acid, a biobased fatty acid, which has a wide range of uses, improves product performance characteristics and adds functionality. TRIEST TMTO-0612 is an ideal synthetic ester for ISO 68 fire resistant hydraulic oil.

TRIEST CTMO-2511, is a heat resistant complex ester with high stability and viscosity, lubricity and hydrolytic stability, formed by the reaction of trimethylol propane and oleic acid. It has applications in several fields like metal working fluids, hydraulic fluids, cutting fluids, steel rolling oils and greases.

TRIEST TMTO-1521 K, is a biodegradable and highly viscous polyol ester formed by the reaction of trimethylol propane and a vegetable-based C18-rich fatty acid, which improves product performance properties and adds functionality. It's applications lies in many fields like metal working fluids, hydraulic fluids, steel rolling oils.

Lanphos PE36 is a powerful emulsifier that can be used across a wide range of polymer systems and more importantly is used as a primary emulsifier without the need for a secondary surfactant to stabilize the system. As a versatile emulsifier. this is the first choice for any formulator. As well as providing extremely small particle sizes it has an in-built stabilizer system to prevent re-agglomeration of polymer particles. Lanphos PE36 is supplied in the free acid form and is typically neutralized before use to produce the salt of choice for individual applications.

Lansurf OA14 is a nonionic surfactant produced by the alkoxylation of ethylene oxide with oleic acid. This product has good compatibility with other nonionic, anionic, cationic and amphoteric surfactants. Lansurf OA14 finds application as a dispersing aid, antistatic agent and emulsifier for oils.

Lanphos PE35 is a phosphate ester manufactured using phosphorous pentoxide to give a product that contains both mono and di-esters. The main advantage of a phosphate ester over a conventional anionic is it’s excellent stability in high concentration of acid,alkali and electrolyte.

DeTERIC ODP-LF Sodium Octyliminodipropionate is a versatile ingredient with applications in various home care and industrial cleaning formulations. Its acid-stable and alkaline-stable features make it suitable for use in acid and alkaline cleaners, including aircraft cleaners, aluminum cleaners, asphalt cleaners, and cleaning concentrates.

DeCORE IMT-100LF Corrosion Inhibitor For Steel is a versatile solution for I&I cleaning and home care applications. With excellent lubricity and corrosion resistance, it enhances the performance of alkaline cleaners, detergents, and fluids & lubricants, particularly cutting oils and metalworking fluids. This biodegradable product is identified as a carboxylic acid derivative, functioning as a corrosion inhibitor in ferrous and non-ferrous applications.