Products in Additives: Drawing Oils

Synative® AC LF 420 is an advanced emulsifier under the Fluids and Lubricants category. Tailored for metalworking fluids, this cutting-edge solution finds its application in chemical and industrial manufacturing within the industrial sector. With its innovative technologies, Synative® AC LF 420 optimizes fluid and lubricant functions, enhancing efficiency in metalworking processes. A reliable choice for industrial applications, this product is designed to meet the demands of the chemical and industrial manufacturing sectors, ensuring seamless performance in fluids and lubricants.

AEROXIDE® Alu C is a fine-particulate, pure aluminum oxide (Al₂O₃) with high specific surface area and marked aggregate and agglomerate structure. Because of it high purity and low water content, the product can be used well as an additive to anorganic materials, for heat insulation, and also as a catalyst substrate. The positive surface charge can be used to control the electrostatic charge.

Desilube 77 is an ecofriendly high performance anti-wear, anti-friction, extreme pressure lubricant additive.

SANHIBITOR 102 is an oil-soluble rust inhibitor, suitable for turbine oils. Also, it is applicable for lubricants. It has excellent demulsifying properties.

SANHIBITOR No.2-1 is a water-soluble and oil-soluble rust inhibitor. It has excellent rust-preventive properties on both ferrous and non-ferrous metals. It produces less foam. The recommended concentration: 0.2–0.5 wt %.

SANHIBITOR 150 is an oil-soluble rust inhibitor. It imparts excellent rust preventive properties to lubricants such as turbine oils, and fuel oils when used in small amounts.

NEWPOL 75H-90000 is polyalkylene glycol-type lubricant used for lithium soap grease as well as high temperature grease compounded with graphite or molybdenum sulfide. It is soluble in water.

Synthetic Sodium Sulfonates Synsul™ NA is a series of synthetic sodium sulfonates of various molecular weights. These products are carefully and selectively manufactured to ensure consistent quality with little variation from batch to batch. The lower molecular weight products, Synsul™ NA 420 and Synsul™ NA 450, have good affinity for water making them excellent components in emulsifier packages. The higher molecular weight products, Synsul™ NA 480, and Synsul™ NA 535, have less affinity for water thereby imparting rust and corrosion inhibiting characteristics. The advantages of these products include lower viscosity for ease of handling, lighter color, and greater batch-to-batch consistency.

NSP Naturals™ 450, 500, and 550 are oil soluble “natural” sodium sulfonates derived from the sulfonation of specific solvent neutral base oils. These products do not contain any aromatic polynuclear hydrocarbons, carboxylates, asphaltenes or chlorinated derivatives. All NSP Naturals™ products offer the formulator excellent solubility, emulsification, and anti-corrosive characteristics due to the broad molecular weight distribution of these products.

Smithol 76-1000 is used in industrial lubricants, metal working lubricants, metal stamping, rust inhibitor additive, deep drawing lubricants, and bottle tube drawing lubricants.

Synthetic Sodium Sulfonates Synsul™ NA is a series of synthetic sodium sulfonates of various molecular weights. These products are carefully and selectively manufactured to ensure consistent quality with little variation from batch to batch. The lower molecular weight products, Synsul™ NA 420 and Synsul™ NA 450, have good affinity for water making them excellent components in emulsifier packages. The higher molecular weight products, Synsul™ NA 480, and Synsul™ NA 535, have less affinity for water thereby imparting rust and corrosion inhibiting characteristics. The advantages of these products include lower viscosity for ease of handling, lighter color, and greater batch-to-batch consistency.

Branched Sodium Sulfonate Synsul™ 455BR is a unique medium molecular weight sodium sulfonate derived from a branched alkylate. This product is easily formulated into soluble oil bases, semi-synthetic fluids and other metalworking compounds as an emulsifier and rust inhibitor. The branched structure aids in inherent bio-stability. Therefore, fluids derived from Synsul™ 455BR may exhibit longer fluid life than those formulated with either linear or natural sodium sulfonates.

HeBoLub® O30 is a highly concentrated, stable oil dispersion of ultrafine hexagonal Boron Nitride particles in a high quality base oil. When added to lubricants, HeBoLub® O30 helps to reduce friction and wear.

BT TMPTO is trimethylpropane trioleate and applied in metalworking Fluids ,Environmentally acceptable lubricants and it is Produced from plant-based materials.

Jalpon™ 1250 is a lower viscosity thixotropic overbased calcium sulfonate designed for use as an additive in oils for metal removal and forming operations including metal stamping and drawing, as well as in other machining oils such as neat and soluble oils.

Smithol 54 is used in non-ferrous applications as a synthetic lubricant, drawing and rolling compound. (Water is enticing).

Oil-Free Sodium Sulfonates Synsul™ ES440 and ES490 are oil soluble synthetic sulfonates in an ester diluent. These unique, mineral oil-free products offer excellent lubricity, dispersion properties and corrosion inhibition in a variety of metalworking fluids.

K-Ox™ W15L and W75L are synthetic fatty acids made from petroleum hydrocarbons. K-Ox™ W15L and W75L may be used as a total or partial replacement for natural fats, oils, or fatty acid in the formulation of cutting, drawing, spinning, and rolling oils. They are not subject to bacterial degradation as are the natural fats. The esters derived from K-Ox™ W15L and W75L offer excellent lubricity and wetting characteristics to metalworking formulations. The higher acid number of K-Ox™ W75L offers more reactive sites for effective conversion to a variety soaps and esters.

Smithol 55 is used in non-ferrous applications as a synthetic lubricant, drawing and rolling compound (Water is enticing).

K-Ox™ P600/45 is a synthetic fatty acid made from petroleum hydrocarbons. K-Ox™ P600/45 may be used as a total or partial replacement for natural fats, oils, or fatty acid in the formulation of cutting, drawing, spinning, and rolling oils. It is not subject to bacterial degradation as are the natural fats. K-Ox™ P600/45 is a rust preventive intermediate which is readily converted to a variety of metallic soaps.

NSP Naturals™ 450, 500, and 550 are oil soluble “natural” sodium sulfonates derived from the sulfonation of specific solvent neutral base oils. These products do not contain any aromatic polynuclear hydrocarbons, carboxylates, asphaltenes or chlorinated derivatives. All NSP Naturals™ products offer the formulator excellent solubility, emulsification, and anti-corrosive characteristics due to the broad molecular weight distribution of these products.

Synthetic Sodium Sulfonates Synsul™ NA is a series of synthetic sodium sulfonates of various molecular weights. These products are carefully and selectively manufactured to ensure consistent quality with little variation from batch to batch. The lower molecular weight products, Synsul™ NA 420 and Synsul™ NA 450, have good affinity for water making them excellent components in emulsifier packages. The higher molecular weight products, Synsul™ NA 480, and Synsul™ NA 535, have less affinity for water thereby imparting rust and corrosion inhibiting characteristics. The advantages of these products include lower viscosity for ease of handling, lighter color, and greater batch-to-batch consistency.

NSP Naturals™ 450, 500, and 550 are oil soluble “natural” sodium sulfonates derived from the sulfonation of specific solvent neutral base oils. These products do not contain any aromatic polynuclear hydrocarbons, carboxylates, asphaltenes or chlorinated derivatives. All NSP Naturals™ products offer the formulator excellent solubility, emulsification, and anti-corrosive characteristics due to the broad molecular weight distribution of these products.

Oleum Sulfonated Synthetic Sodium Sulfonates Synsul™ 415, 450, and 500 are oil soluble, oleum sulfonated synthetic sodium sulfonates. Synsul™ 415 and 450 have good affinity for water making them excellent components in emulsifier packages. Synsul™ 500 displaces water, making it a good rust and corrosion inhibitor component.

Oleum Sulfonated Synthetic Sodium Sulfonates Synsul™ 415, 450, and 500 are oil soluble, oleum sulfonated synthetic sodium sulfonates. Synsul™ 415 and 450 have good affinity for water making them excellent components in emulsifier packages. Synsul™ 500 displaces water, making it a good rust and corrosion inhibitor component.

Oil-Free Sodium Sulfonates Synsul™ ES440 and ES490 are oil soluble synthetic sulfonates in an ester diluent. These unique, mineral oil-free products offer excellent lubricity, dispersion properties and corrosion inhibition in a variety of metalworking fluids.

Oleum Sulfonated Synthetic Sodium Sulfonates Synsul™ 415, 450, and 500 are oil soluble, oleum sulfonated synthetic sodium sulfonates. Synsul™ 415 and 450 have good affinity for water making them excellent components in emulsifier packages. Synsul™ 500 displaces water, making it a good rust and corrosion inhibitor component.

Synthetic Sodium Sulfonates Synsul™ NA is a series of synthetic sodium sulfonates of various molecular weights. These products are carefully and selectively manufactured to ensure consistent quality with little variation from batch to batch. The lower molecular weight products, Synsul™ NA 420 and Synsul™ NA 450, have good affinity for water making them excellent components in emulsifier packages. The higher molecular weight products, Synsul™ NA 480, and Synsul™ NA 535, have less affinity for water thereby imparting rust and corrosion inhibiting characteristics. The advantages of these products include lower viscosity for ease of handling, lighter color, and greater batch-to-batch consistency.

Synthetic Sodium Sulfonate Synsul™ 445N is a medium molecular weight sodium sulfonate derived from a specialty alkylate to ensure consistent performance quality. This product is easily formulated into soluble oil bases, semi-synthetic fluids and other metalworking compounds as an emulsifier and rust inhibitor.

K-Ox™ W15L and W75L are synthetic fatty acids made from petroleum hydrocarbons. K-Ox™ W15L and W75L may be used as a total or partial replacement for natural fats, oils, or fatty acid in the formulation of cutting, drawing, spinning, and rolling oils. They are not subject to bacterial degradation as are the natural fats. The esters derived from K-Ox™ W15L and W75L offer excellent lubricity and wetting characteristics to metalworking formulations. The higher acid number of K-Ox™ W75L offers more reactive sites for effective conversion to a variety soaps and esters.

Polybut™ X2 is a low molecular weight conventional polybutene.

Polybut™ 9 is a low molecular weight conventional polybutene.

Polybut™ 28 is a low molecular weight conventional polybutene.

Polybut™ 10 is a low molecular weight conventional polybutene.

Polybut 200 is a low molecular Weight Conventional Polybutene

Focus RP RZ8 is a very cost effective water-soluble corrosion inhibitor additive designed to impart temporary rust protection for ferrous and non-ferrous applications. It does not contribute to discoloration on the surface of non-ferrous metals. It imparts lubrication properties when used at higher concentrations. It is designed to have a relatively low pH and high acid content, which provides the ability to formulate fluid concentrates with a variety of alkaline sources. Focus Additive RP RZ8 is non-foaming and has excellent stability in hard water up to 1500 ppm hardness. Focus Additive RP RZ8 gives rust protection when water evaporates. The thin liquid film that remains provides rust protection to ferrous surfaces, even under high humidity conditions. This film can easily be removed by rinsing with water. It also burns off cleanly in high temperature processing operations. Focus Additive RP RZ8 is composed of a mixture of organic acid salts, is DEA free and can be waste treated by adjusting the pH below the methyl orange end point.