Products in Additives: Corrosion Resistant

STEPAN® MWA-310 is a phosphate ester and can be used as an emulsifier and extreme pressure agent in synthetic and semi-synthetic metalworking fluids. It can be used as a component of lubricants, gear and chain oils, metalworking fluids, hydraulic fluids, and plasticizers. It is soluble in water and slightly soluble in oil, yielding very low surface tension and cmc values. It can improve corrosion inhibition and also provide protection for aluminum.

STEPAN® MWA-450 is a dea amide used as an emulsifier in soluble oils and synthetic and semi-synthetic metalworking fluids. It can be used as a component of lubricants, gear and chain oils, metalworking fluids, hydraulic fluids, and plasticizers. It can also help tighten emulsions, improve rust prevention, and provide lubricity. It should be considered a component for soluble oils where sodium sulfonates are not used.

STEPAN® MWA-501 is a methyl ester that can be used as either a solvent or a cosolvent in metalworking, die casting, and metal forming processes. It provides excellent film-forming properties and lubricity in straight oil, semi-synthetic, and full synthetic metalworking fluids. It is a non-staining product and has shown excellent results in metal-forming fluids as well as metal removal operations.

ZELEC® A130 can be used as a wetting agent in the paint and coating industries. In this application, it could also contribute to the improvement of corrosion resistance, gloss, color acceptance, wet scrub resistance, and the hiding power of the film. It can also be used as an antistatic agent in textile and leather finishing and processing and in rubber, plastic, and composite processing. It can also act as an emulsifier and corrosion inhibitor in metalworking fluid, printing pressrooms, and oil fields. It can also be used as a demolding agent in a construction area and in rubber, plastic, or composite processing. It also has lubrication properties for metalworking fluids and textile and leather finishing and processing, including extreme-pressure and anti-wear properties.

STEPAN® MWA-110 is a sulfonate that is used in metalworking applications. STEPAN® MWA-110 is used in the emulsification of components in metalworking formulations. It can act as a coupling agent for several components in soluble oils, semi-synthetic fluids, and synthetic fluids.

STEPAN® MWA-180 is an anionic surfactant used in the emulsification of components and can enable improved performance in metal cleaning in metalworking applications. This ammonium laureth sulfate can be used to efficiently remove oil residue from metal surfaces. It is kosher-certified.

STEPAN® MWA-390 is an alcohol phosphate, functioning as a low-foaming emulsifier. Its application extends to synthetic and semi-synthetic lubricants, gear and chain oils, metalworking fluids, hydraulic fluids, and plasticizers. It falls within the category of surfactants and has a presence in the industrial products market.

STEPAN® MWA-160 is a powder sodium lauryl sulfate product for use in metalworking applications. It is used in the emulsification of components and can enable improved performance in metal cleaning. It can also be used to efficiently remove oil from metal surfaces.

STEPAN® MWA-395 is a phosphate ester and can be used as an emulsifier and extreme pressure agent in synthetic and semi-synthetic metalworking fluids. It can be used as a component of lubricants, gear and chain oils, metalworking fluids, hydraulic fluids, and plasticizers. It is soluble in water and slightly soluble in oil, yielding very low surface tension and cmc values.

REWOCOROS® AL 200 is a lauryl polyglycol ether-based phosphoric acid ester. It serves as a multifunctional corrosion inhibitor for water-miscible lubricants, suitable for aluminum alloys and ferrous metals depending on the type of neutralization agent used. When combined with alkali and ammonium salts, it can also function as an extreme pressure (EP), anti-wear (AW) additive, and lubricity improver for water-miscible lubricants, such as metalworking fluids.

Libranol RDG is a clear, amber, viscous liquid blend of rapeseed oil diethanolamide and glycerol. This unique formulation is highly esteemed for its exceptional qualities, which encompass antistatic, anticorrosive, and emulsifying properties. These attributes render Libranol RDG as a valuable and versatile component in a variety of metalworking fluids, showcasing its importance in industrial application fields.

TRIEST EHPH-2111, is a water-soluble, anti-corrosion ester formed by the reaction of ethylhexyl alcohol with mono- and di-phosphoric acid, used as a viscosity control agent, especially in polymers and coatings. It's applications lies in many fields like polymer industry, coatings, textile auxiliary chemicals, cleaning products.

TRIEST DTDP-9011, is an oxoalcohol ester in clear, liquid form that gives the product flexibility and durability to improve the mechanical properties of materials and increase their functionality, showing superior performance characteristics at low temperatures. It's applications lies in several fields like metal working fluids, polymer industry.

TRIEST DPHP-3911, is an oxoalcohol ester in clear, liquid form that gives the product flexibility and durability to improve the mechanical properties of materials and increase their functionality, showing superior performance characteristics at low temperatures. It has applications in many areas like metal working fluids, plastic and polymer industry and also in compressor and engine oils.

KBB Menhaden Fish Oils are used as an additive in caulking, glazing, marine lubricants, sealants, paints, inks, soaps, and greases.

SANHIBITOR No.50 is a water-soluble rust inhibitor. It produces less foam and is easily rinsed. It has excellent rust preventive properties and is resistant to heat and alkaline solutions. It is substitutable for alkanol amine. The recommended concentration: 0.2–0.5 wt %.

SANHIBITOR HP-500 is suitable as rust inhibitor for machinery & metals.

Desilube 100L is a highly effective package for grease formulations. It provides excellent extreme pressure (EP), lubricity, anti-friction (AF) and anti-wear (AW), rust and copper inhibiting properties to various formulations. It is to be used with: Li, LiX, CaS, Bentonite clay, Polyurea, AlX greases.

SANHIBITOR OMA-10 is a water-soluble rust inhibitor, suitable for metal working oils. It prevents rust even on nonferrous metals. The recommended concentration: 0.3–0.5 wt %.

IONET S-80S has excellent rust preventive, lubricating and emulsifying properties. They are effective as additives for rust preventive oils and metal working oils.

NEWPOL PE-61 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

IONET T products are ethylene oxide adducts of IONET S products and are more hydrophilic. They are used as emulsifiers together with lipophilic surfactants such as IONET S products, to produce creamy cosmetics and creamy ointments. IONET T-20C is used for fluidic cosmetics.

SANHIBITOR 102 is an oil-soluble rust inhibitor, suitable for turbine oils. Also, it is applicable for lubricants. It has excellent demulsifying properties.

IONET S products are nonionic and lipophilic surfactants. They have low toxicity and exhibit low irritancy. They are used as emulsifiers together with hydrophilic surfactants such as IONET T products and EMULMIN products, to produce creamy cosmetics and creamy ointments. IONET S-80 is used for fluidic cosmetics.

NEWPOL PE-64 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

IONET S products are nonionic and lipophilic surfactants. They have low toxicity and exhibit low irritancy. They are used as emulsifiers together with hydrophilic surfactants such as IONET T products and EMULMIN products, to produce creamy cosmetics and creamy ointments. IONET S-60V is used for nonfluidic cosmetics.

NEWPOL PE-34 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

NEWPOL PE-74 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

NEWPOL PE-75 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

IONET S products are nonionic and lipophilic surfactants. They have low toxicity and exhibit low irritancy. They are used as emulsifiers together with hydrophilic surfactants such as IONET T products and EMULMIN products, to produce creamy cosmetics and creamy ointments.

NEWPOL PE-62 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

SANHIBITOR No.2-1 is a water-soluble and oil-soluble rust inhibitor. It has excellent rust-preventive properties on both ferrous and non-ferrous metals. It produces less foam. The recommended concentration: 0.2–0.5 wt %.

NEWPOL PE-78 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

NEWPOL PE-71 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

IONET T products are ethylene oxide adducts of IONET S products and are more hydrophilic. They are used as emulsifiers together with lipophilic surfactants such as IONET S products, to produce creamy cosmetics and creamy ointments. IONET T-60V is used for nonfluidic cosmetics.

NEWPOL PE-68 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.