Products in Additives: Defoamer

Synative® AC AMH 2 is employed in the industrial sector, specifically in chemical and industrial manufacturing applications. Its primary use is in fluids and lubricants, specifically within the category of metalworking fluids. Synative® AC AMH 2 is in a liquid physical form, making it well-suited for various processes and applications within the metalworking industry.

MAKON® 17R2 is a nonionic reverse eo/po block copolymer renowned for its fast-breaking, low-foaming, and defoaming attributes. It finds application across diverse industries, including industrial, institutional, pulp and paper, textiles, paints and coatings, and more. Its usage is relevant in metalworking fluids, defoamers, dispersants, industrial lubricants, plasticizers, pulp and paper processing, rinse aids, and textile processing. As with other products in the makon® range, it is a low-ash product.

MAKON® 25R2 stands as a notable nonionic reverse EO/PO block copolymer, prized for its swift-breaking, low foaming, and defoaming capabilities. Its versatility extends across a spectrum of industries where its unique properties find diverse applications and contribute to enhanced performance and efficiency.

SILFOAM® SD 882 is an anhydrous, low viscosity antifoam agent that has the ability to form a fine dispersion when introduced to water or highly polar systems. Its degree of organomodification allows it to effectively control negative effects such as surface defects and separation tendencies.

TEGO® Antifoam 1488 is a versatile emulsion-based anti-foaming agent tailored for various applications. It effectively controls foam formation in processes like emulsion polymerization and textile sizing. With good compatibility, it finds use in diverse industrial additives, including metalworking fluids and nonwovens. This emulsion-type additive is available in drums, catering to different production scales. Its performance spans markets like adhesives and sealants, fluids and lubricants, and building materials. TEGO® Antifoam 1488's role in polymer dispersions manufacturing adds to its versatility and value.

AG 6202 is a low foaming alkyl glucoside, non-ionic surfactant, based on a short chain fatty alcohol and glucose.

Ampholak YJH-40 is a low-foaming, salt-free octyliminodipropionate that is alkaline-stable with good alkali tolerance. Ampholak YJH 40 is typically used in detergents, shampoos, and other cleaners.

Harcros Chemicals Antifoam AF 100 IND is a 100% active silicone compound that provides an efficient and economical means of preventing costly and dangerous foaming conditions in aqueous and non-aqueous systems. This product is primarily used in non-aqueous industrial applications where silica fillers can be tolerated.

Harcros Chemicals Antifoam GN 16D is a 100% high-performance, general-purpose antifoam that is effective across multiple industrial applications and foam types. Its applications include:

• Wastewater and water treatment
• Control of landfill collection foam
• Fertilizers and adjuvants
• Hot aqueous systems
• Packaging
• Blending and mixing
• Metalworking
• Lagoon aeration
• Neutralization ponds
• Settling ponds
• Chemical processing

Dispelair® CF 236 is a foam control agent for concentrate and tank side addition in metal working fluids.

Dispelair® CF 740 is a foam control agent for concentrate and tank side addition in metal working fluids.

Dispelair® CF 757 is a foam control agent for concentrate and tank side addition in metal working fluids.

Dispelair® CF 643 is a foam control agent for concentrate and tank side addition in metal working fluids.

Dispelair® CF 479 is a foam control agent for concentrate and tank side addition in metal working fluids.

Dispelair® CF 879 is a foam control agent for concentrate and tank side addition in metal working fluids.

Dispelair® CF 750 is a foam control agent for concentrate and tank side addition in metal working fluids.

Dispelair® CF 937 is a foam control agent for concentrate and tank side addition in metal working fluids.

NEWPOL LB-625 is suitable for application to rubbers, plastics such as high speed tire molding, foam rubber, etc. They are used in organic solvent solution.

NEWPOL LB-285 is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers.

NEWPOL LB-385 is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers.

IONET S products are nonionic and lipophilic surfactants. They have low toxicity and exhibit low irritancy. They are used as emulsifiers together with hydrophilic surfactants such as IONET T products and EMULMIN products, to produce creamy cosmetics and creamy ointments. IONET S-80 is used for fluidic cosmetics.

IONET S products are nonionic and lipophilic surfactants. They have low toxicity and exhibit low irritancy. They are used as emulsifiers together with hydrophilic surfactants such as IONET T products and EMULMIN products, to produce creamy cosmetics and creamy ointments. IONET S-60V is used for nonfluidic cosmetics.

IONET S products are nonionic and lipophilic surfactants. They have low toxicity and exhibit low irritancy. They are used as emulsifiers together with hydrophilic surfactants such as IONET T products and EMULMIN products, to produce creamy cosmetics and creamy ointments.

NEWPOL LB-65 is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers.

NEWPOL LB-3000 is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers.

NEWPOL LB-1715 is suitable for application to rubbers, plastics such as high speed tire molding, foam rubber, etc. They are used in organic solvent solution.

I-PEG 600 DO is a Polyethylene Glycol 600 Dioleate and they are non-ionic surfactants made via the esterification of polyethylene glycols and fatty acids derived from plant sources. PEG Esters reduce surface tension of agricultural sprays and can also help stabilize other components of your agricultural spray formulation.

XFO-1526 is an effective defoamer for decorative, architectural, and industrial coatings. XFO-1526 is a blend of hydrophobic silica and specialty waxes in mineral oil, and offers outstanding foam control performance in paint and coating formulations.

LUBIMAX® AFS 125 is a polydimethylsiloxane based Anti-Foaming additive package that is typically used in non-aqueous systems. LUBIMAX® AFS 125 has excellent freezing point, Viscosity Index and strong chemical, mechanical and thermal stability.

Product D is a specially blended, highly effective, silicone-based anti-foam agent. Using a unique emulsifier system that was designed for metalworking applications, Product D has an extended sump life over other silicone based defoamers. It is used in very small quantities where foaming has become a problem.

A specially blended, highly effective, modified siloxane anti-foam agent that is effective at eliminating entrained air generated by high pressure coolant and washer systems. It is used in very small quantities where foaming has become a problem.

A specially blended, highly effective, non-silicone oil-based anti-foam agent. It is used in very small quantities where foaming has become a problem.

DENSIPOL® TA 10 is a cost-effective antifoaming agent formulated based on modified organopolysiloxanes. This specialized antifoaming agent offers multiple benefits for various applications. It is highly effective, even in high shearing conditions, providing reliable foam generation control. DENSIPOL® TA 10 is designed to maintain excellent foam control over an extended period of time, ensuring consistent performance. Additionally, it is heat-resistant, capable of withstanding temperatures up to 80°C.