Products in Base Stocks & Oils: Engine Oils

DeCAL ERT 09 is a solvent-free, biodegradable alternative to mineral oil. It retains all the properties of natural rapeseed oil and is readily emulsified by adding water and agitating. DeCAL ERT 09 is also suitable for use as the base oil in many lubricants, including cutting fluids, rolling/metalworking oils, drilling muds, two-stroke oil, greases, wire drawing, and chainsaw lubricants.

LEXOLUBE PQ-68 is a pentaerythritol ester that provides lubricity, detergency, low temperature fluidity and additive compatibility in a wide range of applications. It is optimal in terms of oxidation, and is useful as a base oil and an additive for most applications requiring high temperature stability such as 2 and 4 stroke oils, compressor oils, hydraulic fluids, greases and gear oils.

LUBRICIT TMP C810 is a polyol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is useful in applications where good oxidative stability, low temperature fluidity, and high bioderived content are required. The product has achieved the HX-1 designation by NSF International, qualifying it as a lubricant basestock for incidental food contact.

LUBRICIT TMP C9 is a low viscosity polyol ester that is used as a synthetic base oil for formulations requiring wide temperature operating range, low volatility and good oxidative stability. The product has achieved the HX-1 designation by NSF International, qualifying it as a lubricant basestock for incidental food contact.

LEXOLUBE CLG-460 is a complex polyol ester that provides robust solutions for high temperature applications. It is carefully manufactured to provide little or no residual carboxylic acid. This leads to better emulsion stability, and bio-resistance when properly formulated. LEXOLUBE CG-3000 has achieved the NSF international HX-1 ranking for incidental food contact under the requirements of FDA 21 CFR 178.3570. With greater than 70% renewable content and high biodegradability, the product in on the LuSC list, making it a great choice for any EAL formula, such as those required by the Vessel General Permit (VGP) or EcoLabel.

LUBRICIT PE 510/1 is a low viscosity polyol ester that is used as a synthetic base oil for formulations requiring wide temperature operating range, low volatility and good oxidative stability.

LUBRICIT 9522 is a complex dimer ester. It provides cost-effective solutions for a wide range of applications such as textile (tenter frame), fiberglass production, and wood laminating. It is useful as a synthetic base stock for most applications requiring high temperature stability. It features oxidation resistance, lubricity, and thermal stability for low deposit formation.

LEXOLUBE 3I-310 is a polyol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is optimal in terms of oxidation, and is useful as a base oil and additive for most applications requiring high temperature stability such as compressor/gear oils, hydraulic fluids, grease formulations, as well as 2 and 4 stroke oils.

LUBRICIT 9515 is a polyol ester that is used as a synthetic base oil for formulations requiring wide temperature operating range and good oxidative stability.

LUBRICIT 9505 is a dimerate fluid that is used as a synthetic base oil for formulations requiring good low temperature flow properties. Dimer esters offer high bioderived content are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LEXOLUBE CQ-3000 is an environmentally friendly, high viscosity synthetic complex ester designed for superior thermal and oxidative stability. It is compatible with other synthetic esters, PAO and mineral oils. It can be used as a viscosity modifier, while also improving performance in high temperature lubricant applications that exceed 200°C. LEXOLUBE CQ-3000 provides excellent boundary protection, and can be used as an antiwear/extreme pressure additive to eliminate or reduce chlorine, sulfur and/or phosphorus additives in lubricant formulations. LEXOLUBE CQ-3000 is a USDA Certified Biobased Product with high biodegradability that is also on the LuSC list, making it a great choice for Vessel General Permit (VGP) or EcoLabel products.

LUBRICIT 2-EHD/1 is a dimerate fluid that is used as a synthetic base oil for formulations requiring outstanding low temperature flow properties. Dimer esters offer high bioderived content are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

CalEster™ TS is suitable for a broad range of lubricant applications where a wide operating temperature capability is desired including turbine oils, gear oils, engine oils, air compressor oils, and hydraulic fluids. CalEster™ Synthetic Polyol Esters Calumet Specialty Products Partners, L.P. Offers a complete line of high purity synthetic polyol esters for use in high performance lubricant applications. With over 50 years of experience in manufacturing synthetic polyol esters, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

CalEster™ 68 Pro is an ISO 68 pure polyol ester made from mixed pentaerythritols with saturated fatty acids for maximum stability. CalEster™ Synthetic Polyol Ester Calumet Specialty Products Partners, L.P. Offers a complete line of high purity Synthetic Polyol Ester for use in high performance lubricant applications. With over 50 years of experience in manufacturing Synthetic Polyol Ester, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

CalEster™ 22 Pro is an ISO 32 pure polyol ester made from pentaerythritol with saturated fatty acids for maximum stability. CalEster™ Synthetic Polyol Ester Calumet Specialty Products Partners, L.P. Offers a complete line of high purity Synthetic Polyol Ester for use in high performance lubricant applications. With over 50 years of experience in manufacturing Synthetic Polyol Ester, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

CalEster™ Synthetic Polyol Esters Calumet Specialty Products Partners, L.P. Offers a complete line of high purity synthetic polyol esters for use in high performance lubricant applications. With over 50 years of experience in manufacturing synthetic polyol esters, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

CalEster™ T is NSF HX-1 registered as suitable for use in food manufacturing industry. CalEster™ T is suitable for a broad range of lubricant applications where low viscosity, wide temperature capability, and biodegradability are desired, including automotive engine oils, environmental lubricants, air compressor oils, transmission fluids, turbine oils, hydraulic fluids, and wide temperature grease. CalEster™ T also makes an excellent correction fluid for low polarity base oils like PAO and GTL. CalEster™ Synthetic Polyol Esters Calumet Specialty Products Partners, L.P. Offers a complete line of high purity synthetic polyol esters for use in high performance lubricant applications. With over 50 years of experience in manufacturing synthetic polyol esters, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

CalEster™ MW is suitable for a broad range of lubricant applications where a combination of lower viscosity and wide operating temperature capability are desired including turbine oils, engine oils, air compressor oils, hydraulic fluids, and refrigeration lubricants. CalEster™ Synthetic Polyol Esters Calumet Specialty Products Partners, L.P. Offers a complete line of high purity synthetic polyol esters for use in high performance lubricant applications. With over 50 years of experience in manufacturing synthetic polyol esters, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

CalEster™ N is suitable for a broad range of lubricant applications where a combination of lower viscosity and a wide operating temperature capability are desired including turbine oils, engine oils, air compressor oils, hydraulic fluids, and refrigeration lubricants. CalEster™ Synthetic Polyol Esters Calumet Specialty Products Partners, L.P. Offers a complete line of high purity synthetic polyol esters for use in high performance lubricant applications. With over 50 years of experience in manufacturing synthetic polyol esters, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

CalEster™ 68 S is an ISO 68 pure polyol ester made from mono-pentaerythritols and saturated fatty acids for maximum stability. CalEster™ Synthetic Polyol Ester Calumet Specialty Products Partners, L.P. Offers a complete line of high purity Synthetic Polyol Ester for use in high performance lubricant applications. With over 50 years of experience in manufacturing Synthetic Polyol Ester, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

CalEster™ 32 Pro is an ISO 32 pure polyol ester made from pentaerythritol with saturated fatty acids for maximum stability. CalEster™ Synthetic Polyol Ester Calumet Specialty Products Partners, L.P. Offers a complete line of high purity Synthetic Polyol Ester for use in high performance lubricant applications. With over 50 years of experience in manufacturing Synthetic Polyol Ester, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

This severely hydrotreated naphthenic base oil is primarily used in the metalworking and compounder blending industries. It has a low pour point, a low odor level, excellent color, and resistance to discoloration by heat or ultraviolet light.

Polybut™ X2 is a low molecular weight conventional polybutene.

This severely hydrotreated naphthenic base oil is primarily used in the metalworking and compounder blending industries. It has a low pour point, a low odor level, excellent color, and resistance to discoloration by heat or ultraviolet light.

Polybut™ 9 is a low molecular weight conventional polybutene.

Polybut™ 28 is a low molecular weight conventional polybutene.

Polybut™ 10 is a low molecular weight conventional polybutene.

This severely hydrotreated naphthenic base oil is primarily used in the metalworking and compounder blending industries. It has a low pour point, a low odor level, excellent color, and resistance to discoloration by heat or ultraviolet light

Weifang Jahwa Chemical Trimethylolpropane Trioleate (TMPTO) has excellent lubricating properties,high viscosity index,fire resistances and high biodegradabilities. TMPTO is an ideal base oil for ISO 46 fire resistant hydraulic oil (HFDU)and one ingredient for the formulation of biodegradable hydraulic oil,chain saw oil and water yacht engine oil.

As a leading manufacturer and distributor of low viscosity PAO products, RB Products proudly offers RB PAO 9 cSt as part of our product line. PAO 9 is a polyalphaolefin synthetic oil with many different applications, including: Gear Oils; Compressor Oils; Industrial Valve Lubricants; Synthetic Greases; Synthetic Engine Oils

Polybut 200 is a low molecular Weight Conventional Polybutene

RB Products proudly offers an extensive line of low viscosity PAO products to domestic and international clients in various industries. We manufacture RB PAO 4 cSt, a polyalphaolefin synthetic oil with many different applications, including: Low Viscosity Compressor & Gear Oils; Hydraulic Fluid; Synthetic Grease Additives; Crank Case Engine Oils

This severely hydrotreated naphthenic base oil is primarily used in the metalworking and compounder blending industries. It has a low pour point, a low odor level, excellent color, and resistance to discoloration by heat or ultraviolet light.

Ergon’s HyGold base oils are genuine naphthenic and paraffinic oils produced to exact specifications and designed for a variety of lubricating applications. HyGold products have low pour points, good solvency power, low odor levels, excellent color and color stability characteristics.

This severely hydrotreated naphthenic base oil is primarily used in the metalworking and compounder blending industries. It has a low pour point, a low odor level, excellent color, and resistance to discoloration by heat or ultraviolet light.

This severely hydrotreated paraffinic base oil provides excellent color and consistency. It passes the IP 346 labeling requirement.