Products in Construction Chemicals: Oil & Gas Applications

USALCO Sodium Aluminate (Granular) is a white powder that easily dissolves in water and is the dry form of sodium aluminate. It is produced by mixing alumina trihydrate with sodium hydroxide to create a solution, which is then solidified by removing excess moisture. This product does not contain any stabilizing agents.

CEDEPAL® FA-406 is a unique surfactant known for its remarkable foaming capabilities across various conditions, including soft and hard water, saturated brine, and gypsum solutions. It serves as a versatile foaming agent applicable for multiple purposes. Widely used in wallboard applications for its foaming power, it also proves its worth in gas and oil field drilling operations, as well as concrete admixtures.

SILFOAM® SE 47 is a versatile antifoam emulsion with a relatively high emulsifier content. It has shown great effectiveness in addressing foam-related challenges in various applications, including textile auxiliaries and processes like dyeing. Additionally, it is suitable for use in surfactant formulations, cooling lubricants based on mineral oils, and for separating monomers from dispersions and converting dispersions into derivatives.

H-Quest® L-50 LA Sodium glucoheptonate has many industrial uses as a high performance chelating agent. Its superior performance in the pH range between 9 and 14 is due to its efficiency in forming stable chelates with di- and tri-valent metal ions such as Ca+2, Mg+2, Fe+2, Fe+3, Zn+2, Al+3, etc.

T-Soft® L60 is an anionic detergent that exhibits excellent emulsification, wetting, and foaming properties. It is used in a wide variety of industrial markets; oil and gas, HI and I, construction, and textiles.

Alpha Olefin Sulfonate Synsul™ AOS is an aqueous solution of sodium olefin sulfonates with a molecular weight of approximately 325. This non-ionic surfactant is highly effective as the foaming agent in many different personal care applications as well as fracturing fluids for subterranean formations. It also has utility as a foaming agent in enhanced oil recovery and is an efficient component for the clean-up of gas producing wells. Synsul™ AOS exhibits excellent heat stability and is compatible with a wide variety of other additives. It is especially suited for use in freshwater systems and is readily biodegradable.

Piq-White Ultra Premium Filler 30 is fine sized dry pulverized carbonate filler. Material is available in 50 lb. paper bags, palletized and stretch-wrapped, 1500 lb. mini bulk bags or in bulk. Piqua Minerals fillers are available with various average particle sizing for other filler applications.

APChem CFL 3000 is a synthetic copolymer developed to control fluid loss over a broad temperature range, 15.5 to 232°C in fresh to saturated saltwater slurries. Effective in lightweight, dispersed slurries. CFL-3000L is a 16% active liquid version.

PIQ-White Premium Filler 70 is a general purpose filler primarily intended for elastomeric compounding. Likely applications in elastomers include footwear, housewares, lawn and garden equipment, recreational equipment, aircraft and automotive parts. Also, the material may be used in some Fiberglass Reinforced Plastic (FRP), Sheet Molding Compound (SMC) and Bulk Molding Compounds (BMCs) instead of more finely ground fillers. (Available in bagged, super sack or bulk).

R-E-D Fume Oil & Gas - 104 OG is used to make high performance concrete in the oil and gas fields. It provides better flow for easier application, decreases permeability by increasing the resistance to ion penetration and potential gas migration, provides greater enhancement in compressive and flexural strengths, durability, modulus of elasticity, and pore structure, reduces viscosity and the set time of cement based materials.

COATTUN SMW.375 is a high quality Mica with high Al2O3, produced from deposits in the Cine-Milas region, Turkiye.

CELOCELL™ HEC 350 L(B) is a nonionic cellulose derivative that dissolves readily in water, either cold or hot. It is used to produce solutions having a wide range of viscosity. Such solutions are pseudoplastic, that is, they vary in viscosity depending upon the amount of stress applied. CELOCELL™ HEC as a thickener, protective colloid, binder, stabilizer and suspending agent in a variety of industrial applications, such as water-based paints, adhesives, emulsion polymers, toothpaste, cosmetics and building products.

Kwark® GL is used as an additive / raw material and mixed in various formulations in order to improve key properties of the final product. Kwark® is available under several particle size distributions to match various applications.

Norchem Concrete Products Silica Fume is a very fine pozzolanic material, composed of amorphous silica produced by electric arc furnaces as a byproduct of the production of elemental silicon or ferro silicon alloys. When added to precast and ready-mixed concrete, silica fume produces high-performance, high-strength concrete with an increased life-span and improved structural economics. SILICA FUME is produced in conformance with the ASTM C-1240 specifications. The quality is controlled and monitored throughout the entire production process to ensure that it meets or exceeds specification requirements.

COATTUN SMW.215 is a high quality Mica with high Al2O3, produced from deposits in the Cine-Milas region, Turkiye.

High Calcium Quicklime are pulverized limestone products which are produced by grinding and screening industrial-grade limestone and dolomite.

PIQ-White Filler 300 is a fine sized dry pulverized carbonate filler. Material is available in 50 lb. paper bags, palletized and stretch wrapped, 2000 lb. mini bulk bags or in bulk. Piqua Minerals fillers are available with various average particle sizing for other filler applications.

APChem Latex 10L is a synthetic copolymer developed to control fluid loss over a broad temperature range, 15.5 to 232°C in fresh to saturated saltwater slurries. Effective in lightweight, dispersed slurries. CFL-3000L is a 16% active liquid version.

APChem CFL 117 is a synthetic polymer used to control loss of filtrate from cement in fresh to salt water slurries up to 204°C. Has non-gellation properties, which make it ideally suited for squeeze cementing and coiled tubing squeeze cementing. Also available as a liquid; CFL-117L is a 41.7% active, non-aqueous suspension.

ROKAmid KAD/2A is a non-ionic surfactant with the INCI name ‘Cocamide DEA’. It is based on natural vegetable oils. It has a form of a clear or slightly turbid light-yellow to yellow liquid. ROKAmid KAD/2A is one of the most common co-surfactants, which has a range of very interesting application properties. Most of all, it is used as a rheology modifier, that is a thickener which improves consistence by creating so-called mixed micelles. Among other KAD series ROKAmides, it shows improved thickening properties compared to the ROKAmid KAD or KAD/1A. When mixed with anionic surfactants, it increases and stabilizes the quality of foam. ROKAmid KAD/2A is very effective even at a low concentration.

APChem CFL 110 is a powdered polysaccharide derivative suitable for application in fresh water or with salt up to 18% by weight of water (BWOW). Effective to 220°F (104°C). Acts as a retarder at temperatures below 71°C.

Sizex 48 is a liquid Sodium Lignosulphonate, which used in a wide variety of applications.

PIQ-White Select Filler 100 is a fine sized dry pulverized carbonate filler. Piqua Minerals fillers are available with various average particle sizing for other filler applications.

APChem CFL 205 is a synthetic, water-soluble, latex powder effective from 60 to 232°C to make cement more elastic (less shattering on perforating). Can be used with fresh water, seawater, calcium chloride water (up to 8%), and saturated saltwater.

COATTUN SMW.125 is a high quality Mica with high Al2O3, produced from deposits in the Cine-Milas region, Turkiye.