Products in Processing Aids: Coatings Manufacturing

Guangzhou Flying Dragon Chemical Ltd. Methylene Chloride is an excellent organic solvent with extensive solubility and a high volatilization rate to materials like acrylates, vinyl esters, epoxy resins, polyurethane, polyesters, phenolic resins, etc. It has been widely used as a solvent in pharmaceuticals, coatings, inks, paints, adhesives, leather production processes, Tianna water as well as blowing agents for polyurethane foam.

Naxcat® TSA-65W is 65% active toluenesulfonic acid (TSA) diluted in water. This acid is formulated for easier handling, due to its lower viscosity compared to more concentrated TSA. It is the strongest of Nease Co., LLC's organic acids and can be used for a variety of industrial applications.

Naxcat® TSA-95 is the strongest of our organic acids and is the most suitable esterification catalyst for the production of phthalates and other plasticizers. Aromatic sulfonic acids are created by sulfonating aromatic compounds with sulfuric acid, SO3, or oleum. They are similar in strength to mineral acids like sulfuric acid, but they are particularly useful for organic reactions where an inorganic, mineral acid may cause charring, oxidation, or an unwanted chemical reaction.

Naxcat® P65D is a light-colored product, 65% active in water. It is the mildest of our acid products and is particularly useful in electroplating applications where color is important. It offers an advantage in such applications due to its light color.

Naxcat® XSA-90 is a strong, concentrated organic acid that is completely liquid. For ease of handling as compared with TSA-95. Naxcat® XSA-90 will not crystallize at low temperatures, offering acid strength and fluidity. It is comparable in strength to mineral acids such as sulfuric acid, but is especially suitable for organic reactions where an inorganic, mineral acid could cause charring, oxidation, or an unwanted chemical reaction.

Naxolate® AS-LN90 is a sodium lauryl sulfate in needle form, offering the advantage of a high-activity solid with minimal dusting. As an anionic surfactant, it has good detergency, emulsification, high foaming, and wetting properties and is widely used in light-duty laundry detergents, fine fabric washes, shampoos, and many personal care applications. Additionally, it is used in many formulations for its thickening effect.

Mosselman Sorbitan Monolaurate (1338-39-2) are non-ionic emulsifiers obtained by the esterification of dehydrated sorbitol with fatty acids. These esters are mostly water in oil emulsifiers, but they can also act as oil in water emulsifiers when they are used in combination with the ethoxylated sorbitan esters. Sorbitan esters are used in cosmetics, lubricants, textiles etc.

Mosselman Sorbitan Tristearate (26658-19-5) are non-ionic emulsifiers obtained by the esterification of dehydrated sorbitol with fatty acids. These esters are mostly water in oil emulsifiers, but they can also act as oil in water emulsifiers when they are used in combination with the ethoxylated sorbitanesters.

Mosselman Sorbitan Monolaurate 20 EO - Food Polysorbate 20 (9005-64-5) is a bio-based emulsifying agent that is ideal for use in various industries such as chemical manufacturing, textiles manufacturing, water treatment, and more. It offers excellent detergency and emulsifying properties, making it suitable for use in industrial and home care applications. The product has a lemon to amber-colored oily liquid appearance and is compatible with polymers and resins such as Polyvinyl Chloride (PVC).

Xinyu South Wollastonite XYNFW-F50 is a typical metamorphic mineral, which has primarily occurred in contact belt between acid rock and limestone, and sometimes occurred in deep metamorphic Calc schist, volcanic product and in some alkaline rock. Wollastonite is a thin plate-like crystal of triclinic crystal system whichbelongs to a chain silicate. Its aggregation is radial or fibrous. Its special crystal structure determines its properties, Wollastonite with the advantage of non-toxic, acid and alkali resistant, low hygroscopicity, low oil absorption, low conductivity, good insulation, high whiteness, thermal stability and dimensional stability good, excellent mechanical properties and electrical characteristics. Wollastonite is a natural green, low carbon emission and energy saving industrial mineral.

Madol Madol 100 is a pure white dolomite. The dolomitic fillers are dust From Operating dolomitic rock and are among other products when crushing.

Madol Madol 15 is a pure white dolomite. The dolomitic fillers are dust From Operating dolomitic rock and are among other products when crushing.

China Mineral Processing (CMP) Round Kiln Kaolin is produced in Jiangxi, Guangxi, shanxi, shandong provinces of china. It is often loose and scaly, dense and fine grained, earthy, with uneven faults. Because of different impurity, it has different color like gray, black, red. It become white after calcination.

Madol Madol 45 is a pure white dolomite. The dolomitic fillers are dust From Operating dolomitic rock and are among other products when crushing.

GH Chemicals CR-3 are zinc oxide grade that has a large particle size. French Process Zinc Oxide grades are differentiated by surface area or particle size.

China Mineral Processing (CMP) Rotary Kiln Kaolin is produced in Jiangxi, Guangxi, shanxi, shandong provinces of china. It is often loose and scaly, dense and fine grained, earthy, with uneven faults. Because of different impurity, it has different color like gray, black, red. It become white after calcination.

Madol Madol 10 is a white dolomite. The dolomitic fillers are dust From Operating dolomitic rock and are among other products when crushing.

Madol Madol 30 is a pure white dolomite. The dolomitic fillers are dust From Operating dolomitic rock and are among other products when crushing.

Madol Madol 63 is a pure white dolomite. The dolomitic fillers are dust From Operating dolomitic rock and are among other products when crushing.

Zilight® Ultra-Small Nanozirconia Doped Grades offers yttria-stabilized zirconia nanoparticles dispersed in various media for use in a wide range of applications. zilight® ultra-small nanozirconia doped grades can be used as starting materials, or sintering additives, for the fabrication of ceramics and ceramic nanocomposites used in structural, biomedical, dental applications and more. They can as well be used to produce nanostructured inorganic coatings. They also find applications as nanofillers in composite materials, for instance dental composites and nanocoatings, and in 3D-printing feedstocks.