Products in Color Pigments: Orange (Fluorescent)

An incredibly inert fluorescent pigment, which is highly cross-linked and has a spherical particle shape for use in applications where the avoidance of swelling, bleeding, migration or plateout is desired.

An incredibly inert fluorescent pigment, which is highly cross-linked and has a spherical particle shape for use in applications where the avoidance of swelling, bleeding, migration or plateout is desired.

An incredibly fine particle fluorescent colorant in emulsion form for use in applications where small particles and low viscosity are desired.

A fine particle size pigment with high tinctorial strength, manufactured in a thermoset matrix. For use where heat and solvent resistance are essential. These pigments are generally more suitable for long term storage in water systems. Formulated for optimal fade resistance.

A tinctorially strong general purpose fluorescent pigment for use in low polarity systems including paper coatings, target coatings and certain aerosol paints.

A tinctorially strong fluorescent ink base for use in sheetfed, heatset and UV ink systems that prints in one pass at equivalent strength of a typical fluorescent ink base in two passes. BIB2 contains no traditional ink oils, which can attack rollers on UV presses.

A fine particle size formaldehyde-free pigment. For use in aqueous systems and non-aqueous systems.

Completely non-formaldehyde fluorescent pigment for masterbatch

Completely non-formaldehyde fluorescent pigment for masterbatch

A tinctorially strong fluorescent ink base for use in sheetfed and heatset lithographic ink systems that prints in one pass at equivalent strength of a typical fluorescent ink base in two passes.

Completely non-formaldehyde fluorescent pigment for masterbatch

Completely non-formaldehyde fluorescent pigment for masterbatch

A tinctorially strong general purpose fluorescent pigment for use in low polarity systems including paper coatings, target coatings and certain aerosol paints.

Completely non-formaldehyde fluorescent pigment for masterbatch

An incredibly inert fluorescent pigment, which is highly cross-linked and has a spherical particle shape for use in applications where the avoidance of swelling, bleeding, migration or plateout is desired.

A tinctorially strong general purpose fluorescent pigment for use in low polarity systems including paper coatings, paints, screen inks, plastisols and gravure type "A" inks.

The ARAPLAST carrier is based on a modified polyester resin technology designed especially for coloring Olefin (HDPE, MDPE, LDPE, PP, cPP) and TPU polymers revealing high heat stability, excellent plate out and migration performance. The ARAGEN-10 pigments are the better option for Engineering plastics (PES, PET, PC, POM, PA12), rupper, silicon and EVA

The ARAPLAST carrier is based on a modified polyester resin technology designed especially for coloring Olefin (HDPE, MDPE, LDPE, PP, cPP) and TPU polymers revealing high heat stability, excellent plate out and migration performance. The ARAGEN-10 pigments are the better option for Engineering plastics (PES, PET, PC, POM, PA12), rupper, silicon and EVA

The ARAPLAST carrier is based on a modified polyester resin technology designed especially for coloring Olefin (HDPE, MDPE, LDPE, PP, cPP) and TPU polymers revealing high heat stability, excellent plate out and migration performance. The ARAGEN-10 pigments are the better option for Engineering plastics (PES, PET, PC, POM, PA12), rupper, silicon and EVA

A and AX series pigments are thermoplastic, fluorescent pigments recommended for a wide range of applications where resistance to strong solvents is not needed, including paper coatings, vinyl coated fabric, A-type gravure inks, paints, screen inks, and vinyl plastisols and organisols.

Elara™ the second generation of regulatory approved fluorescent colorants for cosmetics! Lightfastness has been improved an average of 2.5 times over the first generation of fluorescent colorants. Elara™ colorants can be used in oil-based and solvent or water born formulations. These colorants employ a revolutionary new thermoset polymer that is resistant to the solvents commonly employed in nail enamels and hair sprays. This makeup colorant performs well in all types of personal care products, including lip gloss and lip sticks, lotions and soaps, face paint, temporary hair color, and nail lacquer to name a few.

ECO pigments are the first formaldehyde-free pigments to attain the color brilliance and stability offered by traditional formaldehyde containing products with the added benefit of being produced using recycled materials. ECO pigments are recommended for a wide range of applications where resistance to strong solvents is not required. ECO pigments can be used in paper coating, textile printing, aliphatic solvent-based gravure inks, craft and hobby paints and vinyl plastisol inks.

The DayGlo SPL-J Series Dispersions contain approximately 58% fluorescent pigment dispersed in water and a small percentage of alkali soluble acrylic resin. The SPL-J Series Dispersions are V.O.C. (Volatile Organic Compounds) free. They are compatible with a wide range of aqueous systems

Elara™ the second generation of regulatory approved fluorescent colorants for cosmetics! Lightfastness has been improved an average of 2.5 times over the first generation of fluorescent colorants. Elara™ colorants can be used in oil-based and solvent or water born formulations. These colorants employ a revolutionary new thermoset polymer that is resistant to the solvents commonly employed in nail enamels and hair sprays. This makeup colorant performs well in all types of personal care products, including lip gloss and lip sticks, lotions and soaps, face paint, temporary hair color, and nail lacquer to name a few.

ARAMARK-30 emulsions are formaldehyde-free, fluorescent, waterborne acrylic-pigment-emulsions especially for use in highlighter/marker pens after dilution in demineralized water

DayGlo NX-C pigments are high strength colorants formulated specifically for blow molding applications. They exhibit low blow pin plateout. High pigment loadings are easily achieved with this coarse particle size form.

ARACO-10 fluorescent pigments are state of the art technology for waterborne or solvent-based formulations, low/NON migration in PVC

ARAGEN-10 series, A New Generation of formaldehyde-free, fluorescent pigments for water-free formulations with significantly improved light fastness (2-10 times vs. Formaldehyde based pigments) and heat resistance compared to conventional, formaldehyde-containing fluorescent pigments. This innovative range of daylight fluorescent pigments offers intense fluorescence and outstanding stability in solvent and waterborne formulations.

HM and HMS solvent soluble toners are high strength, transparent fluorescent colorants designed for flexo and gravure applications on flexible packaging, films and foils. HM soluble toners are standard strength, whereas the HMS toners offer higher strength to give the ink maker increased latitude in their formulations.

StarFire® II Litho Bases are a unique combination of ultra-fine, high strength fluorescent pigment dispersed in a rheologically controlled vehicle system. This yields maximum color density and excellent printability.

SPL and WFD dispersions are based on a unique formaldehyde-free pigment technology. These products offer a bright, sub-micron, high strength, fluorescent pigment particle with good lightfastness properties. The SPL and WFD dispersions are suspended in water and suitable for use in water-based inks and coatings.

ARASOL-30 fluorescent pigments are state of the art technology for waterborne or solvent-based spray can formulations with improved color strength

PET Plasticizer Dispersions product line is a series of conventional pigments dispersed in DINP. They have been specifically formulated for use in flexible vinyl applications and caulk applications. They exhibit excellent color strength and color characteristics.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.