Products in Photoluminescent Pigments

ARACO-715 carrier is based on a modified polyester resin technology designed especially for paper, textile, paints, paper and target coating with limited heat stability, water fastness and shelf life.

Phantom DINV invisible pigments are organic UV reactive organic pigments that are invisible in most applications until excited with a UV light (long wave 365nm or short wave 254nm). The 5 micron particle size allows for flexible formulation in water and solvent systems. The strong UV response and low loading requirements (under. 5%) make DINV pigments an excellent choice for security printing, coating and novelty applications.

DayGlo NX-C pigments are high strength colorants formulated specifically for blow molding applications. They exhibit low blow pin plateout. High pigment loadings are easily achieved with this coarse particle size form.

The DayGlo SPL-N Dispersions contain approximately 46% fluorescent pigment dispersed in water and a small percentage of alkali soluble acrylic resin. The SPL-N Dispersions are V.O.C. (Volatile Organic Compounds) free. They are compatible with a wide range of aqueous systems.

ARACO-20 fluorescent pigments are state of the art technology for waterborne or wax formulations with high brilliance and high color strength

PET Plasticizer Dispersions product line is a series of conventional pigments dispersed in DINP. They have been specifically formulated for use in flexible vinyl applications and caulk applications. They exhibit excellent color strength and color characteristics.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

ARAGLO-phosphorescent pigments are rare earth alkaline mineral crystals. They are manufactured to the highest standards and can be charged an infinite number of times. Afterglow is up to 50 times longer than traditional phosphorescent zinc sulfide pigments. Their light fastness is also considerably higher when compared to zinc sulfide pigments

ECO pigments are the first formaldehyde-free pigments to attain the color brilliance and stability offered by traditional formaldehyde containing products with the added benefit of being produced using recycled materials. ECO pigments are recommended for a wide range of applications where resistance to strong solvents is not required. ECO pigments can be used in paper coating, textile printing, aliphatic solvent-based gravure inks, craft and hobby paints and vinyl plastisol inks.

ARACO-10 fluorescent pigments are state of the art technology for waterborne or solvent-based formulations, low/NON migration in PVC

Elara™ the second generation of regulatory approved fluorescent colorants for cosmetics! Lightfastness has been improved an average of 2.5 times over the first generation of fluorescent colorants. Elara™ colorants can be used in oil-based and solvent or water born formulations. These colorants employ a revolutionary new thermoset polymer that is resistant to the solvents commonly employed in nail enamels and hair sprays. This makeup colorant performs well in all types of personal care products, including lip gloss and lip sticks, lotions and soaps, face paint, temporary hair color, and nail lacquer to name a few.

A and AX series pigments are thermoplastic, fluorescent pigments recommended for a wide range of applications where resistance to strong solvents is not needed, including paper coatings, vinyl coated fabric, A-type gravure inks, paints, screen inks, and vinyl plastisols and organisols.

Elara™ the second generation of regulatory approved fluorescent colorants for cosmetics! Lightfastness has been improved an average of 2.5 times over the first generation of fluorescent colorants. Elara™ colorants can be used in oil-based and solvent or water born formulations. These colorants employ a revolutionary new thermoset polymer that is resistant to the solvents commonly employed in nail enamels and hair sprays. This makeup colorant performs well in all types of personal care products, including lip gloss and lip sticks, lotions and soaps, face paint, temporary hair color, and nail lacquer to name a few.

A and AX series pigments are thermoplastic, fluorescent pigments recommended for a wide range of applications where resistance to strong solvents is not needed, including paper coatings, vinyl coated fabric, A-type gravure inks, paints, screen inks, and vinyl plastisols and organisols.

ECO pigments are the first formaldehyde-free pigments to attain the color brilliance and stability offered by traditional formaldehyde containing products with the added benefit of being produced using recycled materials. ECO pigments are recommended for a wide range of applications where resistance to strong solvents is not required. ECO pigments can be used in paper coating, textile printing, aliphatic solvent-based gravure inks, craft and hobby paints and vinyl plastisol inks.

ARACO-30 fluorescent pigments are state of the art technology for waterborne or solvent-based formulations with improved color strenght compared to the ARACO-10 pigments

The DayGlo SPL-J Series Dispersions contain approximately 58% fluorescent pigment dispersed in water and a small percentage of alkali soluble acrylic resin. The SPL-J Series Dispersions are V.O.C. (Volatile Organic Compounds) free. They are compatible with a wide range of aqueous systems

ARASOL-10 fluorescent pigments are state of the art technology for waterborne or solvent-based spray can formulations

WAX and WT Fluorescent Water Dispersions are used in a variety of applications, including latex paints, tempera paints, water colors, paper coatings and other aqueous systems. WAX/WT Dispersions exhibit good lightfastness for interior applications.

Elara™ the second generation of regulatory approved fluorescent colorants for cosmetics! Lightfastness has been improved an average of 2.5 times over the first generation of fluorescent colorants. Elara™ colorants can be used in oil-based and solvent or water born formulations. These colorants employ a revolutionary new thermoset polymer that is resistant to the solvents commonly employed in nail enamels and hair sprays. This makeup colorant performs well in all types of personal care products, including lip gloss and lip sticks, lotions and soaps, face paint, temporary hair color, and nail lacquer to name a few.

Alkaline Earth Aluminate Photoluminescent Pigment (LM0201), a luminous powder, long afterglow fluorescent powder is a kind of light energy storage powder that can glow in the dark after absorbing various visible light under 450 nm and can be reused for many times.

PET Plasticizer Dispersions product line is a series of conventional pigments dispersed in DINP. They have been specifically formulated for use in flexible vinyl applications and caulk applications. They exhibit excellent color strength and color characteristics.

A and AX series pigments are thermoplastic, fluorescent pigments recommended for a wide range of applications where resistance to strong solvents is not needed, including paper coatings, vinyl coated fabric, A-type gravure inks, paints, screen inks, and vinyl plastisols and organisols.

SPL and WFD dispersions are based on a unique formaldehyde-free pigment technology. These products offer a bright, sub-micron, high strength, fluorescent pigment particle with good lightfastness properties. The SPL and WFD dispersions are suspended in water and suitable for use in water-based inks and coatings.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

T and GT-series pigments are thermoset, fluorescent pigments recommended for a wide range of applications where solvent resistance is required.

The DayGlo SPL-J Series Dispersions contain approximately 58% fluorescent pigment dispersed in water and a small percentage of alkali soluble acrylic resin. The SPL-J Series Dispersions are V.O.C. (Volatile Organic Compounds) free. They are compatible with a wide range of aqueous systems

ARAMARK-30 emulsions are formaldehyde-free, fluorescent, waterborne acrylic-pigment-emulsions especially for use in highlighter/marker pens after dilution in demineralized water

ARAQUA-10 series is a new Generation of formaldehyde-free, fluorescent pigments with significantly improved light fastness and color strength compared to conventional, formaldehyde-containing fluorescent pigments. This innovative range of daylight fluorescent pigments offers intense fluorescence and outstanding stability in waterborne formulations for extended shelf-life.

HM and HMS solvent soluble toners are high strength, transparent fluorescent colorants designed for flexo and gravure applications on flexible packaging, films and foils. HM soluble toners are standard strength, whereas the HMS toners offer higher strength to give the ink maker increased latitude in their formulations.

ECO pigments are the first formaldehyde-free pigments to attain the color brilliance and stability offered by traditional formaldehyde containing products with the added benefit of being produced using recycled materials. ECO pigments are recommended for a wide range of applications where resistance to strong solvents is not required. ECO pigments can be used in paper coating, textile printing, aliphatic solvent-based gravure inks, craft and hobby paints and vinyl plastisol inks.

The DayGlo SPL-N Dispersions contain approximately 46% fluorescent pigment dispersed in water and a small percentage of alkali soluble acrylic resin. The SPL-N Dispersions are V.O.C. (Volatile Organic Compounds) free. They are compatible with a wide range of aqueous systems.

Zydeco™ ink bases are a unique combination of ultra-fine, high strength, formaldehyde-free, fluorescent pigment particles that are dispersed in a vehicle system that has been specifically formulated for use in energy curable systems. These products can be used in flexographic and lithographic, UV and EB curable inks. They produce bright, high gloss fluorescent inks that have excellent printing characteristics

ARAQUA-10 series is a new Generation of formaldehyde-free, fluorescent pigments with significantly improved light fastness and color strength compared to conventional, formaldehyde-containing fluorescent pigments. This innovative range of daylight fluorescent pigments offers intense fluorescence and outstanding stability in waterborne formulations for extended shelf-life.

The DayGlo SPL-N Dispersions contain approximately 46% fluorescent pigment dispersed in water and a small percentage of alkali soluble acrylic resin. The SPL-N Dispersions are V.O.C. (Volatile Organic Compounds) free. They are compatible with a wide range of aqueous systems.