Products in Color Pigments

DCL 7053-CB 65% Non-Leafing Aluminum Paste (CB-180S-NL) is a non-leafing aluminum paste with a metal 1 color index. This product can also be used for trade-uses, industrial and maintenance coatings. It also meets the ASTM D962-IV, B standards.

DCL 7081 65% Leafing Aluminum Paste (CB-180S-65) is a medium-fine metal paste, that offers a good combination of reflectivity and hiding. 7054 is ideally suited for trade-use, maintenance, and industrial coatings, it also meets the ASTM D962-II, B standards.

DCL 2GTA Bismuth Vanadate, PY.184 is a green-shaded yellow pigment with excellent alkaline stability, weather fastness, heat stability, high saturation, high opacity and good flow properties. DCC Yellow 2GTA is recommended for high-alkaline substrates and containing systems.

DCL 2283 Opaque Yellow, PY.83 is a medium-shaded diarylide yellow offering good opacity, lightfastness, excellent flow properties, and tinting strength. It is recommended to be used in inkjet and UV inks as well as automotive, aerospace, industrial, and powder coating applications.

DCL 1354 DPP Red, PR.254 (2030 type) is a very opaque, bright medium shade red pigment, coloristically yellower and cleaner than the 1254 grade. It exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of plastics, inks, rubber and coating applications.

DCL 1144 Disazo Red, PR.144 is a medium to slightly blue-shade red pigment with high purity, tinting strength, and excellent heat stability. It is primarily used in the coloration of plastics such as PVC, ABS, polystyrene, polyolefins, and polyester spin dyeing, and is also used in some specialty coatings and inks, though it can cause warpage in HDPE.

DCL 1810M Syn Micronized Yel Iron Oxide, PY.42, consists of lanox iron oxide and has superior dispersibility and improved hiding. It is FDA-approved (Section 178.3297), and has a wide range of applications, including use in plastics such as PVC and PE, as well as decorative and industrial coatings.

DCL 6005 Bon Maroon, PR.52:2 is a blue-shaded red pigment with very good weather fastness in full shades and is typically used in general industrial coatings. It also exhibits good overall resistance properties, lightfastness, and heat stability. This makes it a reliable and versatile choice for a wide range of coating applications.

DCL RC-800-PG Rutile Titanium, PW.6 (Chloride) is a low oil absorption, chloride-process rutile titanium dioxide pigment, surface-treated with alumina and silica. It offers excellent tint strength and dispersibility, providing a bluish/white high dispersion product, and is approved for use under 21 CFR 178.3297 by the FDA.

DCL 2110 Isoindolinone Yellow, PY.110 is a transparent, red shade yellow pigment with excellent lightfastness and good heat stability. 2110 Isoindolinone Yellow, PY.110 is slightly more transparent and redder than 2111. This product is also approved by the FDA under section 178.3297.

DCL Black 430 is a jet-black powder produced by high-temperature calcination. It has good UV and visible opacity, is chemically inert, heat-resistant, and stable to ultraviolet light. This pigment is non-bleeding, non-migratory, has exceptional durability and hiding power, and is generally used in applications where resistance to heat, light, and weather is needed. It is compatible with most resin systems and polymers, and is non-warping, making it suitable for liquid and powder coatings, inks, dispersions, and plastics, among other applications.

DCL 7354 DPP Red, PR.254 is a yellow-shaded DPP that offers excellent opacity, high color saturation, weather resistance, heat stability, acid, alkali, and solvent resistance. It is recommended for high-end coatings and high-end plastics applications, and is FDA compliant for indirect food contact plastic applications.

DCL 243-XF Zinc Chromate ED, PY.36 is an extra-fine, easy-dispersing, chromate-based product with excellent outdoor ability. 243-XF is recommended for all types of primers, including alkyds and epoxy anticorrosive coatings, mainly used in automotive, aerospace, industrial, and powder coating applications.

DCL 1403B 2B Red, PR.48:3 is a yellow-shaded red pigment 48:3. This product is a good alternative to barium lithol pigments with good wax bleed resistance. DCL 1403B 2B Red is yellower than Red 48:2. It is recommended to be used in plastic, ink, and coating applications.

DCL 1820M Syn Micronized Yel Iron Oxide, PY.42 is a synthetic micronized yellow pigment that has superior dispersibility and improved hiding. 1820M is darker and more red in shade compared to 1810M and it is FDA-approved under section 178.3297.

DCL 2316 Dianisidine Orange, PO.16 is a bright yellow shade orange with good opacity and tinting strength mainly for interior applications. This pigment is mainly used in the following applications: Plastics such as PVC and PE Powder and industrial coatings. Solvent flexo, water flexo and UV inks Rubber products

DCL 461 Carbon Black, PBk.6 (Powder) is a blue-tone black powder in which a coarser particle allows for medium viscosity and good flocculation / flood resistance for use in coatings. It is mainly recommended for use in various coatings and plastics.

DCL 1177 Anthraquinone Red, PR.177 is a transparent, non-warping, blue-shaded red with excellent fastness properties. It is FDA-approved (Section 178.3297) and can be used in a variety of plastics, including polyolefins and PVC, as well as PET, ABS, rubber, and styrene. Additionally, it is suitable for general industrial coatings and automotive applications.

DCL Tan 221 Zinc Ferrite, PY.119 is a yellow pigment, primarily utilized in plastics due to its temperature stability up to 500°F. DCL Tan 221 Zinc Ferrite, PY.119 has excellent lightfastness and chemical stability. It is also recommended to be used in industrial and powder coating applications.

DCL 7351 Benzimidazolone Yellow, PY.151 is a high-performance organic orange pigment with excellent weather fastness, heat stability, chemical resistance, and dispersibility. This product has improved gloss and higher chroma compared to other PO.36 products, and is available in both solventborne and waterborne systems.

DCL 7168 Anthanthrone Red, PR.168 is a high-performance, bright yellow-shade red pigment for use in high-end coating applications. It is most notably used in exterior architectural systems, as its superior weather fastness in light tones makes it ideal for such applications.

DCL 1121 Monoazo Yellow, PY.73 is a green-shaded yellow pigment primarily used in decorative water-based paints, as well as in industrial and powder coatings. It features good overall resistance properties, lightfastness, weather fastness, and heat stability, making it a reliable and versatile choice for a range of applications.

DCL 2111 Isoindolinone Yellow, PY.110 is a semi-opaque, red shade yellow pigment with excellent lightfastness and heat stability. It is FDA-approved (Section 178.3297) and exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a range of coating, plastic, ink and rubber applications.

DCL Blue 385 is a rich blue powder produced by high-temperature calcination. It has good UV and visible opacity, is chemically inert, heat-resistant, and stable to ultraviolet light. It is non-bleeding, non-migratory, has exceptional durability and hiding power, and is compatible with most resin systems and polymers, being non-warping. Typical applications include liquid and powder coatings, inks, dispersions, concrete, plastics, and other applications where equivalent pigment chemistry is used.

DCL 2820M Syn Micronized Yel Iron Oxide, PY.42 is a synthetic micronized yellow pigment that has superior dispersibility, improved hiding, and lower oil absorption. 2820M is an offset to Bayferrox 1420M and is FDA-approved (Section 178.3297). It is recommended to be used in plastic and coating applications.

DCL Black 30C941 is a black powder produced through high-temperature calcination, with a blue-shade masstone color and high near-IR reflectivity. It is chemically inert, heat resistant, and stable to ultraviolet light, with exceptional durability and hiding power. It is non-bleeding, non-migratory, and non-warping, and is compatible with most resin systems, polymers, and binders. Typical applications include liquid and powder coatings, inks, dispersions, concrete, plastics, and other applications where equivalent pigment chemistry is used.

DCL Yellow 10C112 is a bright yellow powder produced by high-temperature calcination. It has excellent UV and visible opacity, is chemically inert, heat-resistant, and stable to ultraviolet light. It does not bleed or migrate, has exceptional durability and hiding power, and is generally used in applications where resistance to heat, light, and weather are necessary. It is compatible with most resin systems and polymers, and it is non-warping. Typical applications (non-inclusive) include liquid and powder coatings, inks, dispersions, and other applications where equivalent pigment chemistry is used.

DCL 7251 Benzimidazolone Yellow, PY.151 is an exceptional pigment based on benzimidazolone chemistry that provides superior properties such as high tint strength, excellent bleed resistance, and excellent weather fastness. It is particularly suitable for use in high-end coating applications where exceptional fastness properties are needed, especially when a greenish yellow shade is desired. Additionally, this pigment can be used in various plastic applications.

DCL Brown 10C873 is a dark brown powder produced by high-temperature calcination. It has good UV and visible opacity, high infrared reflection, and is chemically inert, heat-resistant, and stable to ultraviolet light. Furthermore, it is non-bleeding, non-migratory, has exceptional durability and hiding power, and is generally used in applications requiring resistance to heat, light, and weather. Additionally, it is compatible with most resin systems and polymers, and is non-warping. Typical applications (non-inclusive) include liquid and powder coatings, inks, dispersions, and other applications where equivalent pigment chemistry is used.

DCL 1522 Bon Maroon, PR.52:2 is a maroon-shaded red pigment with good lightfastness in the masstone area. It exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of industrial coating applications.

DCL 7036 Benzimidazolone Orange, PO.36 is a vibrant, reddish-orange pigment specifically designed for high-grade industrial coatings, automotive refinishing, and coil coatings. With excellent weather fastness and heat stability, it is an ideal replacement for molybdate orange. DCC Orange 7036 provides a cost-effective, lead-free alternative to molybdate orange for various applications.

DCL Blue 30C527 is a dark blue-green powder produced by high-temperature calcination. It has good UV and visible opacity, is chemically inert, heat-resistant, and stable to ultraviolet light; is non-bleeding and non-migratory; has exceptional durability and hiding power; and is generally used in applications where resistance to heat, light, and weather is needed. It is compatible with most resin systems and polymers, and is non-warping. Typical applications include liquid and powder coatings, inks, dispersions, concrete, plastics, and other applications where equivalent pigment chemistry is used.

DCL 5RLM Bismuth Vanadate, PY.184 is a mid-shaded yellow pigment with excellent durability properties. DCC Yellow 5RLM exhibits high saturation, high opacity and is recommended for use in high-grade industrial, aerospace industrial, powder, and automotive paints, as well as PE and PS plastics.

DCL 2094 Bismuth Vanadate, PY.184 is a bright green shade yellow pigment with the highest color strength versus traditional grades and very good durability properties. DCC Yellow 2094 is used primarily in plastics such as PE and PS; industrial, automotive, aerospace, powder, and decorative paint applications.

DCL 5613 Blue GS, PB.15:3 is a beta-form phthalocyanine blue pigment. It is a stir-in dispersible product that can be used without the need for expensive grinding equipment. It exhibits good overall resistance properties, including lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of inks and coating applications.

DCL 14247 Bismuth Vanadate, PY.184 is a green-shaded yellow pigment with excellent heat and chemical resistance properties. DCC Yellow 14247 is recommended for use in high-grade industrial and automotive paints where excellent light and weather fastness is required.