Products in Corrosion Inhibiting Pigments: Pigment

HALOX® BW-191 is a white, non-refractive, corrosion-inhibiting pigment used in protective coating systems. It is recommended for use in most waterborne systems, such as latexes and water reducibles, and due to its lower oil absorption, it can also be effective in anticorrosive high-solids coatings. On the other hand, HALOX® BW-111 is recommended for use in solventborne epoxy systems, both conventional and high-solids.

HALOX® CW-291 is a white, non-refractive, corrosion-inhibiting pigment used in protective coating systems. It is not recommended for use in immersion or semi-immersion environments. HALOX® CW-291 has the lowest oil absorption of all our borosilicate products and is recommended for use in protective coating systems based on alkyd technology. Because of its low oil absorption, HALOX® CW-291 is specifically suggested for use in high-solids, medium-gloss topcoats, DTM (direct-to-metal) finishes, and self-priming systems. HALOX® CW-291 is compliant with ASTM D 4288-83, specification for calcium borosilicate pigment type 1, class B.

HALOX® SZP-395 is a white, non-refractive, corrosion-inhibiting pigment used in protective coating systems. HALOX® SZP-395 is the most efficient and versatile corrosion-inhibiting pigment. It is recommended for use in a wide variety of resin systems and is equally effective in such resins as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of HALOX® SZP-395 make it the pigment of choice in thin film applications (<1 mil or 25 microns).

HALOX® SZP-391 is a white, nonrefractive, corrosion-inhibiting pigment that is highly efficient and versatile. It is recommended for use in a wide variety of resin systems, such as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. Its fine particle size and low oil absorption make HALOX® SZP-391 the preferred pigment for thin-film applications (<1 mil or 25 microns).

HALOX® BW-111 is a white, non-refractive pigment used as a corrosion inhibitor in protective coating systems. It is specifically recommended for use in solvent-borne epoxy systems, including both conventional and high-solids coatings. The recommended loading levels for HALOX® BW-111 range from 5–10% based on the total formula weight for conventional systems and from 10–20% based on the total formula weight for higher solids systems.

HALOX® Zinc Phosphate is a white, non-refractive, corrosion-inhibiting pigment that is widely used in protective coating systems. It is also known as zinc phosphate-dihydrate and is characterized by a narrow particle size distribution, with an upper particle size limit of 10 microns and a mean particle size of 5 microns. This pigment is highly versatile and serves as a standard corrosion inhibitor for most high-performance resin systems, including vinyl, chlorinated rubbers, and epoxies. It is especially recommended for high acid-value resins, catalyzed baking systems, and vinylidene chloride latexes. In addition, HALOX® Zinc Phosphate is an ideal choice for thin film applications (less than 1 mil or 25 microns). It meets the ASTM D 6280-98 specification for zinc phosphate pigment type I and is widely used in the industry.

HALOX® CW-22/221 is a white, non-refractive, corrosion-inhibiting pigment used in protective coating systems. It is not recommended for use in immersion or semi-immersion environments. HALOX® CW-22/221 is recommended for use in primer systems based on traditional solvent alkyd technology. It can effectively be formulated into such resins as medium- and long-oil alkyds. HALOX® CW-22/221 is compliant with ASTM D7089, which specifies the requirements for calcium borosilicate pigments for use in paints.

HALOX® CZ-170 is a versatile pigment used in protective coating systems to inhibit corrosion and tannin staining. It is a great replacement for zinc oxide and can be used in high-gloss and thin-film applications due to its finer particle size and narrow distribution. With a gloss of over 75 units at 60° and a film thickness of less than 1.0 mils, or 25 microns, HALOX® CZ-170 is a great option for a variety of coating needs. It can be used to protect both metal and wood substrates, making it a universal option for coating systems.

HALOX® SZP-391 JM is an efficient and versatile corrosion-inhibiting pigment. It is a white, nonrefractive, corrosion-inhibiting pigment used in protective coating systems. HALOX® SZP-391 JM is equally effective in such resins as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride-based latexes and is recommended for use in a wide variety of resin systems.

HALOX® Z-PLEX 111 is a corrosion-inhibiting pigment used in protective coating systems that is highly versatile and more cost-effective than commercial zinc phosphate. HALOX® Z-PLEX 111 can provide a higher level of corrosion protection than commercial zinc phosphate when used as an equal-weight replacement.

HALOX® SW-111 is a white, nonrefractive, corrosion-inhibiting pigment used in protective coating systems. HALOX® SW-111 is recommended for use in most water-borne and solvent-borne epoxies. HALOX® SW-111 can be formulated into most water-reducible resin systems and corrosion-resistant caulks and sealants.

HALOX® Z-PLEX® 250 is a white, non-refractive, corrosion-inhibiting pigment used in various protective coatings. It is classified as Zn3(PO4)2.2H2O (dihydrate) and is compliant with ASTM D6280, Specification for Zinc Phosphate Pigment Type I. The recommended loading levels for HALOX® Z-PLEX® 250 range from 5–10% based on the total formula weight.

HALOX® 700 is a white, non-refractive, corrosion-inhibiting pigment used in protective coatings. It provides extended protection in solvent-based and water-based epoxy and urethane coatings through the combination of zinc and aluminum phosphates. When used in alkyd and acrylic coatings, it is recommended to use it in combination with HALOX® Organic Corrosion Inhibitors for optimal performance.

HALOX® CW-314 is a heavy metal-free, non-toxic, anti-corrosive pigment designed for use in waterborne and solvent-borne protective coating systems. It is particularly suitable for systems where 21 CFR 175.300 approval or compliance with ANSI or NSF standards is required. HALOX® CW-314 is highly effective in improving the infrared (IR) reflectance and thermal emissivity of elastomeric roof coatings. It enhances the total solar reflectance (TSR) while maintaining dirt pick-up resistance (DPUR) and preventing mildew growth. It can be used alone or in combination with other non-toxic corrosion inhibitors and mineral pigments in the formulation of environmentally friendly specialty paints.

HALOX® CW-491 is a white, non-refractive, heavy metal-free pigment used as a corrosion inhibitor in protective coating systems. It is versatile and can be used with a variety of solvent and waterborne resin systems. The recommended loading levels for HALOX® CW-491 vary depending on the type of system used. For waterborne systems, the recommended loading levels range from 5–8% based on the total formula weight, while for solventborne systems, the recommended loading levels range from 7–12% based on the total formula weight.

HALOX® CW-2230 is a white, non-refractive, corrosion-inhibiting pigment used in protective coating systems. It is not recommended for use in immersion or semi-immersion environments. HALOX® CW-2230 has the highest borate content and can be effectively formulated into resins such as medium and long-oil alkyds, epoxy-esters, and modified alkyd systems. HALOX® CW-2230 is compliant with ASTM D 4288-83, specification for calcium borosilicate pigment type 2.

The Fine Zinc Powder LARVIK SUPER FINE grade is highly recommended for organic or inorganic paints.

WPC Technologies Strontium Chromate 176 is the most effective and versatile corrosion inhibitor pigment available. Strontium Chromate 176 is a low dust, low oil absorption pigment compatible with aqueous or solvent borne paint systems and effective on all metals, such as steel, galvanized steel and aluminum alloys. It is widely used in aerospace and coil primers.

Habicor® ZN is a Zinc phosphate based anticorrosive pigment. Chemical Structure is Organic modified basic zinc phosphate.

The Fine Zinc Powder FH 500 grade is highly recommended for organic or inorganic paints.

The Fine Zinc Powder LARVIK SUPER EXTRA grade is highly recommended for organic or inorganic paints.

Wayncor™ 211 is an anti-corrosion inhibitive pigment that is very effective in solvent and water based epoxy primers. It does not affect the pot life of 2K systems. It can also be used alone or as a synergist with Zinc Phosphate. Typical use level is between 3 – 7 % total formula weight.

Kronphos PZ is a dehydrate of zinc phosphate designed for manufacture of the anti-corrosive paints, used in demanding environment. The zinc phosphate of the PZ brand has established itself as a reliable anti-corrosion product. High zinc content allows you to add a smaller amount of pigment to obtain excellent anticorrosive properties of your products. The tone luminosity of 99% confirms the purity of our product and enables one to use the antirust pigment of the PZ brand in more complex and responsible formulations of your production.

Habicor® Paste 40 chemical structure is barium chromate (BaCrO4) in solvent naphtha light

Habicor® Paste 21 chemical structure is strontium chromate (SrCrO4) in solvent naphtha light.

Habicor® CS is a Silicate and phosphosilicate based anticorrosive pigment, Chemical Structure is Modified calcium phosphosilicate.

Hybricor™ 204S - Hybrid Corrosion Inhibitor Pigment is a pigment grade Hybrid corrosion inhibitor, effective in primer applications intended for cast and structural aluminum protection. It can easily be incorporated into the coating using a high speed disperser. Hybricor™ 204S has a particle size of 7 Hegman which permits its use in both primer and DTM applications.

Habicor® ZA is a Zinc phosphate based anticorrosive pigment. Chemical Structure is Modified zinc aluminum polyphosphate.

Wayncor™ 222 - Corrosion Inhibitive Pigment is a white, non-refractive, anti-corrosive pigment used in protective coatings. It is widely considered by the coatings industry to be a standard corrosion inhibitor. It exhibits a high degree of versatility and is compatible with almost all commercially available aqueous and solvent based coatings. The use level will vary depending upon resin system, pigment volume concentration and desired performance parameters, however typical use levels are between 3 – 10% total formula weight.

Novinox®PC01 is a Calcium phosphate used as an anticorrosion inhibiting pigment in DYI coatings. It is a stable and non-hygroscopic white powder, it is easily dispersed. Novinox®PC01 may be used in formulations for Environmentally-friendly coatings.

The Fine Zinc Powder LARVIK STANDARD 7 grade is highly recommended for Paints and Plating.

Pigmentan PIGMENTAN EMX is a low cost, high performance, environmentally friendly, direct (1:1) substitute for basic Zinc Phosphate. It is suitable for use in primers for both ferrous and non-ferrous metals. Pigmentan MX is non toxic and contains no Zinc, Chrome, or other heavy metals, and does not require hazardous labeling.

Phosphinal PZ04 is a Zinc Aluminum phosphate developed to give higher and longer anticorrosion performance to the epoxy coatings than standard Zinc phosphate. It is a stable and non-hygroscopic white powder with a low tinting strength, it is easily dispersed. PHOSPHINAL PZ04 is suitable for a wide range of solvent and water based resins. This pigment is specifically adapted to epoxy and acrylic systems.

Wayncor™ 240 - Corrosion Inhibitor Pigment is a white Basic Zinc Molybdate anti-corrosive pigment which imparts good corrosion resistance to protective primers. It has a wide variety use in thermo set and thermo plastic systems. It can be used alone or in conjunction with other anti-corrosive additives. The typical use level for this product is between 3 – 7% based on total formula weight. It has a small particle size and narrow distribution which will permit it to be used in wash primers, DTM, or primer applications.

Corrostain™ 228 - Corrosion Inhibitive Pigment features a unique pigment chemistry which combines the dual functionality of Corrosion Inhibition and Tannin Stain Inhibition. This dual functionality aids in the reduction of raw material inventories and also provides effective inhibitor formulations. It is designed to provide good stability and performance in both solvent and water based systems. Typical use level is between 2 – 6% based upon total formula weight.

PHOPHINOX PZ06 is a basic Zinc phosphate designed to be more reactive than standard Zinc phosphate in PU and alkyd systems. It is a stable and non-hygroscopic white powder with a low tinting strength, it is easily dispersed. PHOSPHINOX PZ06 is an alternative to chromates, for instance it successfully replaces chromates in wash primers.