Products in Corrosion Inhibiting Pigments

HALOX® CZ-170 is a versatile pigment used in protective coating systems to inhibit corrosion and tannin staining. It is a great replacement for zinc oxide and can be used in high-gloss and thin-film applications due to its finer particle size and narrow distribution. With a gloss of over 75 units at 60° and a film thickness of less than 1.0 mils, or 25 microns, HALOX® CZ-170 is a great option for a variety of coating needs. It can be used to protect both metal and wood substrates, making it a universal option for coating systems.

HALOX® SZP-391 is a white, nonrefractive, corrosion-inhibiting pigment that is highly efficient and versatile. It is recommended for use in a wide variety of resin systems, such as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. Its fine particle size and low oil absorption make HALOX® SZP-391 the preferred pigment for thin-film applications (<1 mil or 25 microns).

HALOX® BW-111 is a white, non-refractive pigment used as a corrosion inhibitor in protective coating systems. It is specifically recommended for use in solvent-borne epoxy systems, including both conventional and high-solids coatings. The recommended loading levels for HALOX® BW-111 range from 5–10% based on the total formula weight for conventional systems and from 10–20% based on the total formula weight for higher solids systems.

HALOX® SZP-395 is a white, non-refractive, corrosion-inhibiting pigment used in protective coating systems. HALOX® SZP-395 is the most efficient and versatile corrosion-inhibiting pigment. It is recommended for use in a wide variety of resin systems and is equally effective in such resins as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of HALOX® SZP-395 make it the pigment of choice in thin film applications (<1 mil or 25 microns).

HALOX® Z-PLEX® 250 is a white, non-refractive, corrosion-inhibiting pigment used in various protective coatings. It is classified as Zn3(PO4)2.2H2O (dihydrate) and is compliant with ASTM D6280, Specification for Zinc Phosphate Pigment Type I. The recommended loading levels for HALOX® Z-PLEX® 250 range from 5–10% based on the total formula weight.

HALOX® SZP-391 JM is an efficient and versatile corrosion-inhibiting pigment. It is a white, nonrefractive, corrosion-inhibiting pigment used in protective coating systems. HALOX® SZP-391 JM is equally effective in such resins as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride-based latexes and is recommended for use in a wide variety of resin systems.

HALOX® SW-111 is a white, nonrefractive, corrosion-inhibiting pigment used in protective coating systems. HALOX® SW-111 is recommended for use in most water-borne and solvent-borne epoxies. HALOX® SW-111 can be formulated into most water-reducible resin systems and corrosion-resistant caulks and sealants.

HALOX® BW-191 is a white, non-refractive, corrosion-inhibiting pigment used in protective coating systems. It is recommended for use in most waterborne systems, such as latexes and water reducibles, and due to its lower oil absorption, it can also be effective in anticorrosive high-solids coatings. On the other hand, HALOX® BW-111 is recommended for use in solventborne epoxy systems, both conventional and high-solids.

HALOX® Z-PLEX 111 is a corrosion-inhibiting pigment used in protective coating systems that is highly versatile and more cost-effective than commercial zinc phosphate. HALOX® Z-PLEX 111 can provide a higher level of corrosion protection than commercial zinc phosphate when used as an equal-weight replacement.

HALOX® CW-2230 is a white, non-refractive, corrosion-inhibiting pigment used in protective coating systems. It is not recommended for use in immersion or semi-immersion environments. HALOX® CW-2230 has the highest borate content and can be effectively formulated into resins such as medium and long-oil alkyds, epoxy-esters, and modified alkyd systems. HALOX® CW-2230 is compliant with ASTM D 4288-83, specification for calcium borosilicate pigment type 2.

HALOX® CW-291 is a white, non-refractive, corrosion-inhibiting pigment used in protective coating systems. It is not recommended for use in immersion or semi-immersion environments. HALOX® CW-291 has the lowest oil absorption of all our borosilicate products and is recommended for use in protective coating systems based on alkyd technology. Because of its low oil absorption, HALOX® CW-291 is specifically suggested for use in high-solids, medium-gloss topcoats, DTM (direct-to-metal) finishes, and self-priming systems. HALOX® CW-291 is compliant with ASTM D 4288-83, specification for calcium borosilicate pigment type 1, class B.

HALOX® CW-22/221 is a white, non-refractive, corrosion-inhibiting pigment used in protective coating systems. It is not recommended for use in immersion or semi-immersion environments. HALOX® CW-22/221 is recommended for use in primer systems based on traditional solvent alkyd technology. It can effectively be formulated into such resins as medium- and long-oil alkyds. HALOX® CW-22/221 is compliant with ASTM D7089, which specifies the requirements for calcium borosilicate pigments for use in paints.

HALOX® CW-314 is a heavy metal-free, non-toxic, anti-corrosive pigment designed for use in waterborne and solvent-borne protective coating systems. It is particularly suitable for systems where 21 CFR 175.300 approval or compliance with ANSI or NSF standards is required. HALOX® CW-314 is highly effective in improving the infrared (IR) reflectance and thermal emissivity of elastomeric roof coatings. It enhances the total solar reflectance (TSR) while maintaining dirt pick-up resistance (DPUR) and preventing mildew growth. It can be used alone or in combination with other non-toxic corrosion inhibitors and mineral pigments in the formulation of environmentally friendly specialty paints.

HALOX® 700 is a white, non-refractive, corrosion-inhibiting pigment used in protective coatings. It provides extended protection in solvent-based and water-based epoxy and urethane coatings through the combination of zinc and aluminum phosphates. When used in alkyd and acrylic coatings, it is recommended to use it in combination with HALOX® Organic Corrosion Inhibitors for optimal performance.

HALOX® CW-491 is a white, non-refractive, heavy metal-free pigment used as a corrosion inhibitor in protective coating systems. It is versatile and can be used with a variety of solvent and waterborne resin systems. The recommended loading levels for HALOX® CW-491 vary depending on the type of system used. For waterborne systems, the recommended loading levels range from 5–8% based on the total formula weight, while for solventborne systems, the recommended loading levels range from 7–12% based on the total formula weight.

HALOX® Zinc Phosphate is a white, non-refractive, corrosion-inhibiting pigment that is widely used in protective coating systems. It is also known as zinc phosphate-dihydrate and is characterized by a narrow particle size distribution, with an upper particle size limit of 10 microns and a mean particle size of 5 microns. This pigment is highly versatile and serves as a standard corrosion inhibitor for most high-performance resin systems, including vinyl, chlorinated rubbers, and epoxies. It is especially recommended for high acid-value resins, catalyzed baking systems, and vinylidene chloride latexes. In addition, HALOX® Zinc Phosphate is an ideal choice for thin film applications (less than 1 mil or 25 microns). It meets the ASTM D 6280-98 specification for zinc phosphate pigment type I and is widely used in the industry.

Kronphos PZ is a dehydrate of zinc phosphate designed for manufacture of the anti-corrosive paints, used in demanding environment. The zinc phosphate of the PZ brand has established itself as a reliable anti-corrosion product. High zinc content allows you to add a smaller amount of pigment to obtain excellent anticorrosive properties of your products. The tone luminosity of 99% confirms the purity of our product and enables one to use the antirust pigment of the PZ brand in more complex and responsible formulations of your production.

Novinox®PAM is a corrosion inhibiting pigment suitable for coil coatings. It is a stable and non-hygroscopic white powder with a low tinting strength, it is easily dispersed. Novinox®PAM has been developed to be an alternative to Strontium chromate in coil coatings. It is compatible with PU systems. This is a good alternative to Strontium chromate in coil coatings applied on the Galvalume substrate.

Habicor® ZC is a Zinc phosphate based anticorrosive pigment. Chemical Structure is Modified zinc calcium phosphate.

Hybricor™ 204 - Hybrid Corrosion Inhibitor Pigment is an organic/inorganic hybrid corrosion inhibitor pigment, a proven effective replacement for Cr6+ in aerospace primer applications on aluminum and other non-ferrous substrates. The fine particle size of Hybricor™ 204 (7 Hegman) permits it to be easily incorporated into a coating using a high speed disperser. It is effective in primers, DTM and thin film (< 20 micron) applications. It does not affect pot life of 2K systems. Use level varies by intended application requirements.

Novinox®ePAZ is a corrosion inhibiting pigment suitable for a wide range of applications, from DIY to more demanding ones such as coil coatings. It is a stable and non-hygroscopic white powder, it is easily dispersed. Novinox®ePAZ is suitable for a wide range of solvent and water based resins. Novinox®ePAZ is also an excellent alternative to chromate in coil coatings, epoxy and alkyd resin systems.

KRONPHOS PZA is a zinc aluminum orthophosphate with improved phosphate loading. This leads to a controlled increase of inhibiting water soluble content and thus a better formation of protective layers on the metal surface

Phosphinal PZ04 is a Zinc Aluminum phosphate developed to give higher and longer anticorrosion performance to the epoxy coatings than standard Zinc phosphate. It is a stable and non-hygroscopic white powder with a low tinting strength, it is easily dispersed. PHOSPHINAL PZ04 is suitable for a wide range of solvent and water based resins. This pigment is specifically adapted to epoxy and acrylic systems.

Habicor® CS is a Silicate and phosphosilicate based anticorrosive pigment, Chemical Structure is Modified calcium phosphosilicate.

Habicor® Paste 14 chemical structure is strontium chromate (SrCrO4) in xylene.

The Fine Zinc Powder 4P/32 grade is highly recommended for Paints and Plating.

Kronphos CP is an inorganic white pigment; it is used in paintwork products to enhances anti-corrosion properties and adhesion strength. Thanks to the lamellar structure of the pigment particles, the barrier-layer effect of the coating is enhanced on the anodic area.

Habicor® ZP 3850 is a Zinc phosphate based anticorrosive pigment, Chemical Structure is Zinc phosphate tetrahydrate.

WPC Technologies Strontium Chromate 176 is the most effective and versatile corrosion inhibitor pigment available. Strontium Chromate 176 is a low dust, low oil absorption pigment compatible with aqueous or solvent borne paint systems and effective on all metals, such as steel, galvanized steel and aluminum alloys. It is widely used in aerospace and coil primers.

Wayncor™ 205 - Corrosion Inhibitive Pigment is an anti corrosion pigment that utilizes a calcium ion exchange mechanism to inhibit the corrosion process. Its near neutral pH allows it to be used in a wide variety of formulas without a negative impact on paint stability. The fine Hegman grind (6.5 minimum) permits its use in thin film applications (4 – 10 microns) such as coil coatings and in more traditional industrial applications where the dry film thickness is higher. This fine Hegman value also allows the product to be high speed dispersed. The Wayncor™ 205 mechanism works well on both ferrous and non-ferrous substrates. Wayncor™ 205 can be used as the sole corrosion inhibitor or synergistically with other inhibitive technologies.

The Fine Zinc Powder FH 1000 grade is highly recommended for organic or inorganic paints.

Wayncor™ 214 - Calcium Borosilicate is an effective corrosion inhibitive pigment designed for alkyds and other solvent based systems. Typical use level is 3 – 7% total formula weight.

The Fine Zinc Powder 4P/64 grade is highly recommended for Paints and Plating.

NiCHEM No. 6 Barium Chromate is low salt and meets Military specification MIL-B550A Grade A.

Novinox®ACE110 is a corrosion inhibiting pigment designed for coil coatings. It is a stable and easily dispersed white powder with a low tinting strength. Novinox®ACE110 has been developed as a non toxic and eco-friendly alternative to Strontium chromate for coil coatings. Compatible with PU and PE/melamine systems, Novinox®ACE110 gives excellent anticorrosive performance in coil coatings applied to HDGS, ZAM and CRS.

NiCHEM No. 8842 Calcium Chromate is a chromate primer poigment that is easy dispersing. It is soluble in diluted acids and slightly soluble in water.