Products in 3D Printing Polymers: 3D Printing Applications

SHIKOH™ UV-3700B is UV curable urethane acrylate oligomer with high elongation and soft rubbery elasticity. It is relatively low viscosity despite its high molecular weight. EB and Thermal cure systems are also applicable. Features Soft elastic type, High elongation High molecular weight but relatively low viscosity Non-solvent (100% hardening ingredient) For UV adhesion with monomers Non-yellowing Applications Adhesive: UV/ EB/ Thermal-curable adhesive for electronics device, optical use and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SABIC's Specialties Business LNP™ THERMOCOMP™ 6C004XXAR1 compound is based on Polycarbonate / Polybutylene Terephthalate (PC/PBT) resin containing 20% carbon fiber for Large Format Additive Manufacturing (LFAM) applications. Added features of this grade include: Improved Chemical Resistance, Lower Warp and Good Surface Finish.

SABIC's Specialties Business LNP™ THERMOCOMP™ DC0041XA51 compound is based on PC Copolymer Resin containing 20% carbon fiber for Large Format Additive Manufacturing (LFAM) applications. Added features of this grade include: Higher Stiffness vs. glass fiber, Higher Strength, Higher Temperature Performance and Higher Throughput compared to ABS and PPE, as well as Smooth Surface Finish. This halogen-free flame retardant resin is EN45545 R1 HL3 and R27 HL2 compliant and an ideal candidate for train interior applications (category R1). It also meets requirements of NFPA-130a

SABIC's Specialties Business LNP THERMOCOMP AC004XXAR1 compound is based on Acrylonitrile Butadiene Styrene (ABS) resin containing 20% carbon fiber for Large Format Additive Manufacturing (LFAM) applications. Added features of this grade include: Higher Stiffness vs. glass fiber, Easy Processing, Low warp and Good Print Surface quality, making them a good candidate material for a broad range of applications and tooling, including thermoforming and vacuum-forming.FeaturesCost EffectiveEasier ProcessingGood PrintabilityGood ProcessabilityHigh StiffnessLow WarpageVacuum FormingApplications3D PrintingAdditive Manufacturing This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LNP™ THERMOCOMP™ ZC004XXAR1 compound is based on Polyphenylene Ether / Polystyrene (PPE/PS) blend containing 20% carbon fiber for Large Format Additive Manufacturing (LFAM) applications. Added features of this grade include: Higher Stiffness vs. glass fiber, Lower Thermal Expansion, Improved Hydrolytic Stability, Higher strength to Weight Ratio, Higher Temperature Performance and improved processing vs. ABS based grades.

SABIC's Specialties Business LNP™ THERMOCOMP™ AM DC004XXA11is a compound based on High Heat PC copolymer resin containing 20% carbon fiber for Large Format Additive manufacturing (LFAM) applications, including mid-temperature autoclaving tooling. This compound can offer higher temperature performance than standard PC and avoid some of the processing challenges associated with high temperature materials.

SABIC's Specialties Business LNP THERMOCOMP DF004XXAR1 compound is based on Polycarbonate (PC) resin containing 20% glass fiber for Large Format Additive Manufacturing (LFAM) applications. Added features of this grade include: Higher Strength, Higher Temperature Performance and Higher Throughput compared to ABS and PPE, as well as Excellent Ductility and Smooth Surface Finish. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LNP™ THERMOCOMP™ AM Compound AF004XXAR1 is a top-quality material based on acrylonitrile butadiene styrene (ABS) resin containing 20% glass fiber specifically designed for large format additive manufacturing (LFAM) applications. This grade is easy to process, has low warp, and provides excellent print surface quality, making it an ideal candidate for a broad range of applications and tooling, including thermoforming and vacuum forming. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LNP THERMOCOMP ZF004XXAR1 compound is based on Polyphenylene Ether / Polystyrene (PPE/PS) blend containing 20% glass fiber for Large Format Additive Manufacturing (LFAM) applications. Added features of this grade include: Lower Thermal Expansion, Improved Hydrolytic Stability, Higher Strength to Weight Ratio and Higher Temperature Performance vs. ABS. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LNP™ THERMOCOMP™ EC004XXAR1 is a compound based on Polyetherimide (PEI) resin containing 20% carbon fiber for Large Format Additive manufacturing (LFAM) applications needing higher stiffness vs glass fiber. PEI compounds, based on SABIC's inherently flame-retardant ULTEM™ resins, provide low thermal expansion, high temperature performance, excellent strength-to-weight ratio, high modulus and low creep.

SABIC's Specialties Business LNP THERMOCOMP DC004XXAR1 compound is based on Polycarbonate (PC) resin containing 20% carbon fiber for Large Format Additive Manufacturing (LFAM) applications. Added features of this grade include: Higher Stiffness vs. glass fiber, Higher Strength, Higher Temperature Performance and Higher Throughput compared to ABS and PPE, as well as Excellent Ductility and Smooth Surface Finish.FeaturesCost EffectiveHigh DuctilityHigh Impact ResistanceHigh StiffnessHigh StrengthHigh Temperature StrengthSmooth Surface FinishVery Good Heat ResistanceApplications3D PrintingAdditive Manufacturing This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LNP™ THERMOCOMP™ EF004XXAR1 is a compound based on Polyetherimide (PEI) resin containing 20% glass fiber for Large Format Additive manufacturing (LFAM) applications. PEI compounds, based on SABIC's inherently flame-retardant ULTEM™ resins, provide low thermal expansion, high temperature performance, excellent strength-to-weight ratio, high modulus and low creep.

SABIC's Specialties Business LNP™ THERMOCOMP™ EC004EXAR1 compound is based on Polyetherimide (PEI) resin containing 20% carbon fiber designed to provide a Wider Process Window and Easier Flow for Large Format Additive Manufacturing (LFAM) applications needing High heat performance. PEI compounds, based on SABIC's inherently flame-retardant ULTEM™ resins, provide Low Thermal Expansion, High Temperature Performance, Excellent Strength-to-Weight Ratio, High Modulus and Low Creep.

SABIC's Specialties Business LNP™ THERMOCOMP™ EZ006EXAR1is a compound based on Polyetherimide (PEI) resin containing 30% milled glass fiber for Large Format Additive manufacturing (LFAM) applications requiring better dimensional stability and low thermal expansion. PEI compounds, based on SABIC's inherently flame-retardant ULTEM™ resins, offer high temperature performance, excellent strength-to-weight ratio, high modulus and low creep.

SABIC's Specialties Business LNP THERMOCOMP AM JC004XXAR1 is a compound based on PESU (Polyethersulfone) resin containing 20% carbon fiber for Large Format Additive manufacturing (LFAM) applications needing an inherent FR, reinforcement, and a high heat amorphous solution. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

PolyBarb Filament PEI85 is a series of high quality and easy to print PolyEther Imide filaments with printed mechanical properties surpassing to chopped carbon fiber filled PEI, allowing for significantly stronger parts.

PolyBarb Filament PEEK is a series of high quality and easy to print PolyEther Ether Ketone filaments with printed mechanical properties surpassing chopped carbon fiber filled PEEK, allowing for significantly stronger parts.

PolyBarb Filament PC is a series of high quality and easy to print Poly Carbonate / PBT Blend filaments with printed mechanical properties approximate to chopped carbon fiber filled PEI, allowing for significantly stronger parts printed at lower temperature.

Soft ToughRubber™ is a tough, 3D printable photopolymer. It combines the feel and mechanical properties of silicone with the resolution and surface finish that Digital Light Processing® (DLP) printing provides.

Antero™ 800NA is a PEKK-based FDM® thermoplastic. It combines FDM’s design freedom and ease of use with the excellent strength, toughness and wear-resistant properties of PEKK material. Antero 800NA exhibits high heat resistance, chemical resistance, low outgassing and dimensional stability, particularly in large parts. Appropriate applications include aircraft components exposed to jet fuel, oil and hydraulic fluid, spacecraft parts that demand low outgassing and chemical-resistant industrial parts. Using Antero 800NA with FDM technology avoids the waste associated with subtractive manufacturing of high-cost bulk PEKK material. Antero 800NA is available on Fortus 450mc™ and F900™ 3D Printers and is compatible with breakaway support material SUP8000B™.

Extrudr PETG transparent orange is one of the world‘s most common thermoplastic polymers. Extrudr PETG was developed for a wide range of applications where the main requirement is a good balance between mechanical and optical material properties. The raw material is approved according to the FDA-, REACH- and RoHS-Standards. PETG is flame retardant according to UL 94 at a wall thickness of 3.2 mm.

Taulman 3D Alloy 910 is a significant development from taulman3D. The goal was to provide a material with very high tensile and sufficient elongation to maintain a high degree of durability. Alloy 910, when 3D Printed comes in at 8,100 PSI tensile and close to 12,000PSI when injection molded. It has become a trusted additive material for top aerospace and automotive companies globally. With a combined tensile strength higher than the strongest co-polyesters, the durability of nylons, a shrinkage factor that rivals our t-glase, a vast range of chemical resistance and a 82°C working range, you now have one solution easily printable at 250°C-255°C.

XPETG CF Carbon is one of the world‘s most common thermoplastic polymers. Extrudr XPETG CF was developed for a wide range of applications where the main requirement is a good balance between mechanical and optical material properties. The raw material is approved according to the REACH- and RoHS-Standards. PETG is flame retardant according to UL 94 at a wall thickness of 3.2 mm.

Extrudr Flex Medium Blue is a durable elastomere based on Polycaprolacton-Polyester. It was specially developed for industrial applications and is ideally suited for the production of elastic and damping components. The material is optimized for the FFF/FDM process in regards to thermal stability and better flow properties. The raw material is compliant according to the REACH- and RoHS-Standards.

Solaxis Nylon 6 FR - PA 6 flame retardant is a strong and tough FST engineering-grade SLS thermoplastic It shows very good mechanical properties, such as high modulus, high strength and excellent thermal distortion stability. This material meets flammability standards, and is suitable for aerospace and automotive applications. It can fulfill the requirements of functional applications regarding high accuracy and mechanical strength as well as high heat distortion temperature – properties.

Formlabs Clear Resin is great for fluidics and moldmaking, optics, lighting, and any parts requiring translucency.

Solaxis PC-ISO an industrial thermoplastic, is biocompatible (ISO 10993 USP Class VI)* and can be gamma or EtO sterilized. PC-ISO is commonly used in food and drug packaging and medical device manufacturing because of the material’s strength and medical compatibility. When combined with a Fortus® 3D Printer, PC-ISO gives you parts that can be used for conceptual modeling, functional prototyping, and production parts.

Taulman 3D Alloy 910 HDT is a newly released material, developed to incorporate the legendary printing characteristics of Alloy 910 with additional heat deflection and thermal resistance properties. Many of our customers are placing their 3d printed parts close to heat sources and this led to requests for a higher degree of heat and thermal resistance. In turn, we developed Alloy 910 HDT.

Solaxis Nylon 11 - PA 11 - Polyamide 11 is a strong and tough engineering-grade SLS thermoplastic and parts produced with this material show a high elongation at break, elasticity and high impact resistance. Typical applications are in environments where high deformations and/or exposure to special surroundings may occur.

ABS-ESD7™ (acrylonitrile butadiene styrene-electrostatic dissipative) is an ABS thermoplastic with static dissipative properties for applications where a static charge can damage products, impair their performance or cause an explosion. ABS-ESD7 prevents a buildup of static electricity, so it will not produce a static shock or cause other materials like powders, dust and fine particles to stick to it. Ideal for electronic products with circuit boards and for the transportation and industrial equipment industries. Most widely used to create jigs and fixtures for the assembly of electronic components, but it is also useful for building functional prototypes of fuel storage and delivery products, as well as cases, enclosures and packaging.

Solaxis Nylon 12 CF (carbon filled) is a carbon-filled thermoplastic with excellent structural characteristics. The material is comprised of a blend of Nylon 12 resin and chopped carbon fiber, at a loading of 35% by weight. This combination produces one of the strongest thermoplastics in the FDM® material portfolio. It has the highest flexural strength of any FDM thermoplastic, resulting in the highest stiffness-to-weight ratio. Appropriate uses include strong but lightweight tooling applications and functional prototypes in the aerospace, automotive, industrial and recreational manufacturing industries. FDM Nylon 12CF is available on the Fortus 450mc™ and Stratasys F900™ 3D Printers and is compatible with SR-110™ support material.

Taulman 3D Nylon 645 is currently being used by CNC shops around the world to support quick turn prototypes for pre-pilot and pilot runs as well as production runs. As global supply compresses and just-in-time becomes just-a-little-late, more and more CNC shops are jumping in to fill quick turn need.

GreenTEC Pro Carbon carbon is a biopolymer made from renewable resources with10% carbon fiber. The material offers high rigidity, very good mechanical properties and an increased temperature resistance. In addition, the raw material is approved according to the REACH- and RoHS-Standards.

Formlabs High Temp V1 offers a heat deflection temperature (HDT) of 238°C @ 0.45 MPa, the highest among Formlabs resins.

Formlabs Flexible Resin is excellent for simulating soft-touch materials and adding ergonomic features to multi-material assemblies.

Extrudr Flex Hard White is a durable elastomere based on Polycaprolacton-Polyester. It was specially developed for industrial applications and is ideally suited for the production of elastic and damping components. The material is optimized for the FFF/FDM process in regards to thermal stability and better flow properties. The raw material is compliant according to the REACH- and RoHS-Standards.