Products in Basic Thermoplastics: Blown Film Extrusion

Evalene® LF10181 is the resin of choice for tough flexible films. It exhibits a good balance of tensile and impact strength which makes it ideal for a wide range of film and packaging applications.

Lotrene® FE 8000 is an additive free low density polyethylene grade, produced by a high pressure tubular process, mainly recommended for light and medium duty film applications with good optical properties and medium rigidity.

KWR 101-150 is a Natural Homopolymer, high Density Polyethylene Post-Consumer Resin.

Recyklon Q-REC LDPE Translucent is a regranulate that is suitable for film blowing and has an application range of 25-100 microns. It is also used as an enriching additive to improve the film's quality and strength. This material is suitable for injection molding, extrusion, and pouring, as well as compound production.

Yparex® RENEW 0H279 is a family of maleic-anhydride-(MAH)-functionalised polyolefins. For each of its many application areas Yparex® has suitable grades. The grades are characterized by density and melt flow index, melting temperature and the level of functional groups. Functionality for the varying application range is also obtained by using a large array of different base polymers and production technologies. The materials are produced under the highest quality standards allowing no residual unbonded maleic anhydride in the final product.

ADVANCENE™ EE-1802-AAB is a part of a Butene LLDPE series designed for the Blown & Cast film process, offering high gloss and excellent draw down. Films made from ADVANCENE™ EE-1802-AAB resin have very good tensile and toughness properties.

HF-2207 B5 delivers in granules, white and is a a mixtures of polymer, high friction coefficient, low odor, hexene copolymer.

BF-2210 S5 delivers in granules, white and is a mixtures of polymer materials, low odor, weldable, butene copolymer.

Lotrene® FD 0274 is a low density polyethylene mainly recommended for the extrusion of thin film for light and medium duty applications. It contains both slip additives (target 600 ppm erucamide) and anti blocking additives (target 900 ppm) as well as antioxidants.

Lastar 20-020A is a certified prime resin that has been specifically designed to meet the needs of most 1 to 3 mil thick blown film liner applications. The LD20-020 is simple to process. Consistent film production is ensured by large lot size and superior lot-to-lot uniformity. The recommended minimum film thickness is 1.0 mil. There is no slip and no antiblock in LD20-020.

Itochu Plastics LLF2019F is a general-purpose film grade linear low density made using the BP Gas Phase Process™. The resin exhibits excellent toughness and strength when drawn to thin gages.

kazanorgsintez LLDPE PE2NT15–11 is Linear Low Density Polyethylene grade used for various applications.

kazanorgsintez LLDPE PE2NT17–11 is Linear Low Density Polyethylene grade used for various applications.

Evalene® HF09522 is ideal for stiff and strong films. Bags made of Evalene® HF09522 can carry heavy loads and exhibit good puncture resistance. Packaging made from Evalene® HF09522 has superior performance and good barrier resistance against moisture and oxygen. Downgauging using Evalene® HF09522 is highly recommended due to its superior mechanical properties. Optimum gage reduction is a real possibility.

EVATHENE® UE632 is an ethylene-vinyl acetate copolymer resin (EVA) for use in foam injection, profile extrusion, and blown film extrusion machine.

Lotrene® FE 8004 is a low density polyethylene produced by a high pressure tubular process and is mainly recommended for light and medium duty film applications with good optical properties. It contains slip agent (target: 300 ppm erucamide).

Y S Reclamation LDPE OFF NAT B, reclaim blown Natural color, repelletised polythene, using selected post-industrial LLDPE/LDPE film, filtration of 110-130 is employed in the manufacturing process of the pellets.

Recyklon Q-REC LDPE Blue is a regranulate suitable for film blowing with applications ranging from 40 to 100 microns. It is also used as an enriching additive to improve the film's quality and strength. This material is suitable for injection molding, extrusion, and pouring, as well as compound production.

Ras Lanuf Oil & Gas Processing Company LLF-183N is a low density polyethylene which is used in casting tapes and uses where good mechanical properties.

71601W is a LLDPE blown film grade produced by the Spherilene Technology with controlled morphology, excellent processability & mechanical properties This grade can be used in General Purpose Adhesive Lamination film 71601W is without slip or antiblocking additives

Petroquim PH0953 is Apt for raffia extrusion processes. Good processability and productivity in extrusion and in looms. Excellent performance in weaving processes where it minimizes the formation of dust and lint.

Yparex® Renew 0H218 is a family of maleic-anhydride-(MAH)-functionalised polyolefins. For each of its many application areas Yparex® has suitable grades. The grades are characterized by density and melt flow index, melting temperature and the level of functional groups. Functionality for the varying application range is also obtained by using a large array of different base polymers and production technologies. The materials are produced under the highest quality standards allowing no residual unbonded maleic anhydride in the final product.

Ras Lanuf Oil & Gas Processing Company LLF-181N is a low density polyethylene which is used in heavy-duty bags.

POLYMER-E EV103 is a high VA content ethylene vinyl acetate copolymer resin(EVA) with excellent low temperature impact strength, environmental stress crack resistance, flexibility, elasticity, transparency, and easy process-ability. It could be developed for many new applications and substitute for flexible PVC, rubbers, and Other elastomers. one of major application of POLYMER-E EV103 is incorporated with blowing agent and cross-linking agent for compression molding or injection molding Of foamed shoe sole. Besides, POLYMER-E EV103 could be processed by profile extrusion, injection molding, and blown-extrusion while incorporated with additives

Itochu Plastics LDD2020B is a resin barefoot general purpose liner resin for thin gage applications requiring good drawdown and excellent toughness for blown and cast film extrusion.

BF-4810 delivers in granules, white and is a heat sealabler, low warpage, butene copolymer.

Evalene® HF14522 is suitable for strong and stiff ultra thin films with good barrier properties against moisture and oxygen. Evalene® HF14522 is particularly well suited for short barrel extrusion lines. Evalene® HF14522 delivers downgauging potential that can reduce use of material and maximize throughput, bringing significant advantages to the converter. Evalene® HF14522 is a good core layer material for coextruded films.

71501S is a LLDPE blown film grade produced by the Spherilene Technology This grade can be used in General Purpose Packaging Film Applications 71501S is additivated with slip and antiblocking additives for excellent openability and slip properties

PETILEN YY F00556 is a high density polyethylene copolymer resin developed for blown film extrusion. The structure of the material is bimodal and it has broad molecular weight distribution. The product’s high stiffness makes it possible to produce very thin films.

Lotrene® FD 0374 is a low density polyethylene mainly recommended for the extrusion of very thin film for light duty applications. It contains both slip additives (target 600 ppm erucamide) and anti blocking additives (target 900 ppm) as well as antioxidants.

PAXOTHENE® NA112-27 is a low density polyethylene resin (LDPE) for use in blown film extrusion and injection molding. This resin is supplied in pellet form and contains a slip agent to improve machinability.

kazanorgsintez mLLDPE F2010M is Metallocene Linear Low Density Polyethylene grade used for various applications.

PETILEN YY F00756 is a high density polyethylene copolymer resin developed for blown film extrusion. The structure of the material is bimodal and it has broad molecular weight distribution. The product’s high stiffness makes it possible to produce very thin films.

Itochu Plastics LLF1019B is a general-purpose film grade linear low density made using the BP Gas Phase ProcessTM. The resin exhibits excellent toughness and strength when drawn to thin gages.

Riblene® FF 39 F is a high molecular weight low density polyethylene (LDPE), suitable for blown film extrusion. Riblene FF 39 F is characterized by a good melt strength leading to a good bubble stability during extrusion.Films manufactured by Riblene FF 39 F are easily heat shrinkable and characterized by good optical and mechanical properties.Main ApplicationRiblene FF 39 F is recommended for the production of shrink film for medium and light loads, for lamination film and for blend.

Alkathene XJF143 is a low density polyethylene designed for a variety of low gage (20 - 50μm) general purpose film applications. Alkathene XJF143 does not contain any additives