Products in Basic Thermoplastics: Polypropylene Block Copolymer (PP ...

MOCOM Compounds ALTECH® ECO PP-B 2030/W100.05 BK0002 is a polypropylene block copolymer with 30% glass fiber for automotive and various market segments. It has pre-drying conditions of 80-100°C in an air circulating dryer for 2-4h, depending on moisture content, with a maximum moisture content of 0.10%. Processing conditions include injection molding with a melt temperature of 200-270°C and a mold temperature of 20-60°C. This product has a black color and is processing stabilized.

MOCOM Compounds ALTECH® ECO PP-B 2040/W100.05 BK0002 is a polypropylene block copolymer filled with 40% glass fiber and colored black. It is processing stabilized and is suitable for use in the Automotive and Various market segments. For injection molding, the melt temperature should be between 200-270°C, and the mold temperature should be between 20-60°C.

MOCOM Compounds ALTECH® ECO PP-B 2020/W100.05 BK0002 is a Polypropylene Block Copolymer suitable for Automotive and Various market segments. It contains 20% glass fiber and is black in color. The processing conditions for injection molding include a melt temperature of 200-270°C and a mold temperature of 20-60°C. It is processing stabilized and should be handled with care.

JM-380 is high impact block copolymer which has more ethylene contents than normal block copolymer. This grade is designed to be processed in conventional Injection molding equipment. JM-380 shows Ultra high melt flow, controlled rheology and has medium impact resistance and high strength and stiffness. This grade is appropriate for energy saving and multi-cavity injection molding.

INNOPOL® CS 2-7120 is a 20% talc-filled polypropylene block-copolymer compound. This grade is available in nature and custom colored form.

Moplen EP640T is the polypropylene block copolymer manufactured by PMC under the license of Lyondellbasell using the Spheripol process. Moplen EP640T is a block copolymer suitable for injection molding of automotive compound, electrical appliances and housewares, etc.

INNOPOL® CS 2-5000 is a polypropylene block-copolymer compound. This grade is available in nature and custom colored form.

DuPure TR 76 V is a controlled rheology modified heterophasic polypropylene copolymer (produced with a phthalatefree catalyst). The product shows an excellent fluidity combined with a narrow molecular weight distribution, resulting in fast cycle-times and a high dimensional stability.

RG 2800 K is a Polypropylene Block Copolymer Impact With High Toughness. It is used in Automotive (Bumpers, Fender, Battery Cases), Compounding (Impact Modifier)

INNOPOL® CS 2-8660 FR is a flame retarded, elastomer modified polypropylene block-copolymer compound. This grade is available in nature and custom colored form.

RG 2348 TC is a Polypropylene Block Copolymer Impact With High FLowability and Good Impact. It is used in Thinwalled Packaging, House Wares, Closures, Dairy Cups

DuPure SH 50 is a heterophasic polypropylene copolymer (produced with a phthalate-free catalyst).

B-320 is impact block copolymer which has ethylene-propylene rubber inside homo polypropylene. This grade can be processed by sheet extrusion. B-320 shows good impact resistance at low temperature and has also high strength. It has good vacuum molding property, suitable for the production of vacuum molding goods. B-320 is applied to food packaging tray, various industrial sheets.

DuPure TM 76 is a heterophasic polypropylene copolymer (produced with a phthalate-free catalyst). The product combines a good stiffness with excellent impact strength.

RG 2348 M is a Polypropylene Block Copolymer Impact Contains Nucleating and Antielectrostatic Agents. It is used in Cylindrical Containers, House Wares, Closures

DuPure SW 76 AV is a controlled rheology modified, heterophasic copolymer (produced with a phthalate-free catalyst), suitable for injection molding applications. The product is nucleated and contains anti-electrostatic properties, very high flowability and a good balance of stiffness and impact strength.

J-350 is impact block copolymer with ethylene content as co-monomer. This grade is designed to be processed in conventional Injection molding equipment. J-350 shows good impact resistance at low temperature and has also high strength. It has broad range of property, and is used from industrial supplies to automotive compound base resin.

JI-350 is impact block copolymer with ethylene content as co-monomer. This grade is designed to be processed in conventional Injection molding equipment. JI-350 shows good impact resistance at low temperature and has also high strength. It has broad range of property, and is used from industrial supplies to automotive compound base resin.

INNOPOL® CS 2-8940 BA42 GU 7035 is a gray colored, UV-stabilized and 42% Barium-sulfate filled compound based on polypropylene block-copolymer.

Topilene® HB240TC is a specially designed polypropylene block copolymer (natural colored) that features excellent stiffness & impact strength balance and enhanced thermal stability. It is suitable material for pliable corrugated conduit pipes, thermoforming sheet and injection blow molding applications. Topilene® HB240TC complies with FDA requirements in the code of Federal Regulations in 21 CFR 177.1520 for food contact.

INNO-COMP INNOPOL® CS 2-4750 FR is a 20% mineral filled and halogenated-flame retarded polypropylene copolymer compound. This grade is available in nature and custom colored form.

RG 2300 L is a Polypropylene Block Copolymer Impact Copolymer. It is used in General Injection Molding, House Wares, Closures, Cylindrical Containers, Furniture

DuPure TE 76 is a heterophasic polypropylene copolymer (produced with a phthalate-free catalyst). The product exhibits excellent impact strength at low temperatures, combined with good processability.

INNOPOL® CS 2-8302 is an elastomer modified compound based on polypropylene block- copolymer. This grade is available in nature and custom colored form.

INNOPOL® CS 2-3130 is a 30% talc-filled polypropylene block-copolymer compound. This grade is available in nature and custom colored form.

INNO-COMP INNOPOL® CS 2-3120 T17SR is a 17% talc filled compound based on polypropylene block copolymer. This grade is available in nature and custom colored form.

INNOPOL® CS 2-9523 T16SR BU is a 16% mineral-filled and elastomer modified compound based on polypropylene block-copolymer.

INNOPOL® CS 2-9302 is an elastomer modified compound based on polypropylene block- copolymer. This grade is available in nature and custom colored form.

INNOPOL® CS 2-3000/3 is a polypropylene block-copolymer compound. This grade is available in nature and custom colored form.

INNO-COMP INNOPOL® CS 2-6140 RC is a 40% talc-filled compound based on polypropylene block-copolymer regranulate. This grade is available in black and dark gray colored form.

BJ356AI is a heterophasic copolymer characterized by very high flow, and optimum combination of high stiffness and impact strength.

POLIMAXX®2300K is a Polypropylene Block copolymer resin for injection molding process with medium flow and high impact. It is suitable for the production of general parts such as furniture, house-ware, container’s closure and auto-part. It also meets the F.D.A. requirement in the code of federal regulations in 21 CFR 177.1520 for food contact.

INNOPOL® CS 2-3000 TO a polypropylene block-copolymer based compound. This grade is available in nature and custom colored form.

J-320 is impact block copolymer with ethylene content as co-monomer. This grade is designed to be processed in conventional Injection molding equipment. J-320 shows good impact resistance at low temperature and has also high strength. It has broad range of property, and is used from industrial supplies to automotive compound base resin.

DuPure SR 79 is a heterophasic polypropylene copolymer (produced with a phthalate-free catalyst), combining excellent stiffness with good impact strength. The product is formulated with an advanced nucleation system, resulting in fast injection molding cycle-times and a high dimensional stability.

KM-0051M is a polypropylene block copolymer for injection molding applications. It exhibits a good balance of stiffness and impact strength.