Products in Basic Thermoplastics: Ultra High Molecular Weight Polyet...

OKULEN® 500-REG. UV black FN9100 (PE-HMW) a high molecular weight low pressure polyethylene with regenerated materials.

PROlen 3000 RCM PE 1000 -UHMW- an inexpensive alternative with good material properties and can be used with restrictions without further ado.

PROlen 6000 BOR5 has high chemical resistance and low moisture absorption.

PROFILAN Kunststoffwerk PROoil 9000 has excellent gliding properties and is self-lubricating.

PROlen 6000 EL antistatically equipped, especially for high-speed production lines, but also suitable for contact with food.

PROlen 6000 VIRGIN offers high wear and abrasion resistance, a very low coefficient of sliding friction and excellent notched impact strength even at low temperatures.

Tekalen® A 6000 is used when a high-quality plastic is required that must embody a high level of technical properties.

POLIMAXX®U510FB is an Ultra High Molecular Weight Polyethylene in powder form with an average molecular weight about 5.5 Million g/mol. It is a suitable grade for filament application. The extremely high molecular weight yields several unique properties including high abrasion resistance, impact strength and low coefficient of friction.

OKULEN® 1000 UV black FN9100 is an ultra high molecular low pressure polyethylene (UHMW-PE) with a molecular weight ~ 5.000.000 g/mol.

OKULEN® 500 yellow FN1000 is a high molecular low pressure polyethylene with a molecular weight of approx. 500.000 g/mol.

OKULEN® 500 red FN3000 is a high molecular low pressure polyethylene with a molecular weight of approx. 500.000 g/mol.

The use of this plastic saves energy and improves the efficiency of your machines thanks to its low friction resistance. The sliding friction coefficient is reduced by up to 50 percent with this material – and so too the energy consumption for the drive power required. This plastic offers real energy-saving potential. Thanks to the additive used, Original Material ”S” ® plus+ LF ESD is electrically conductive, enabling voltage to be dissipated at maximum speed with the same maximum friction resistance. A member of the S plus family Production based on PE-UHMW SG 1.1.

"Original Material ""S"" plus+® FP [FS]® is a new technical plastic that completely meets the requirements of the food sector for the detectability of plastic foreign bodies in foods. ""FP"" stands for ""food protect"" and embodies two vital properties: This product is both food-safe and metal-detectable. Metallic foreign bodies in foodsare safety detected by metal detectors and removed. However, plastic particles from plant components can be problematic. Thanks to the use of additives in Original Material ""S"" plus+® FP [FS], all commonly used metal detectors in the food industry can now detect and remove plastic particles. Furthermore, in the case of this material, particles even smaller than the required size for the detectability of metal (3 mm) can be found and removed: Particles of only 2mm in size (see the illustration) have been detected without any problems in tests." A member of the S plus family Production based on PE-UHMW SG 1.1.

Thanks to its extremely low electrical resistances, Original Material "S" plus+® ESD is an optimum conductor. Full voltage dissipation for earthed components at maximum speed enables spark-free, safe work. This material provides a cost-effective alternative to carbon-filled PTFE.A member of the S plus family Production based on PE-UHMW SG 1.2.

OKULEN® 500-REG. green FN6000 (PE-HMW) a high molecular weight low pressure polyethylene with regenerated materials.

OKULEN® 2000 blue FN5884 is an UHMW-PE polymer with a low coefficient of friction. It is a lining material that has been perfected to solve material flow problems.

"For the first time, it has been possible to develop a light plastic with high conductivity and a voltage-dissipating effect on earthed components. This combination was not previously possible. This material is ideal for use in applications where a high value is placed on hygiene and antistatic characteristics. In many work environments, light surfaces are mandatory. The conductivity of Original Material ""S"" plus+® Bright ESD provides optimum safety. Its properties largely match those of Original Material ""S"" plus+® ESD."

OKULEN® 1000 AST black FN9200 is an ultra high molecular low pressure polyethylene (UHMW-PE) with a molecular weight ~ 5.000.000 g/mol. OKULEN® 1000 has material properties that make it extremely versatile; the material is ideally suited for mechanical engineering – OKULEN® 1000 parts are used especially in plant construction and handling technology. The used additives, type and quantity, meets the cleanliness class FDA §178.3297 (USA) the EU-regulations 1935/2004/EC and 10/2011/EC for “Food contact applications”. The product fullfills the requirements of the ATEX - Directive for values of resistivity. It was tested onrepresentative samples by the TÜV-Nord (Germany).

Original Material "S"® black has the same properties as Original Material "S"® green/natural. In addition, it is also electrostatically conductive due to the addition of additives.Production based on PE-UHMW SG 1.2.

Murtfeldt's answer to international demand for energy conservation and sustainability: Murtfeldt Original Material "S" plus+® LF When developing this material Murtfeldt managed tofurther slash the sliding friction coefficient by half. The particularly great feature of this material is that this value is constant and is achieved even at low friction intensities. The required driving force is drastically reduced, meaning that your motors need less energy and are thus significantly more economical to run. This innovative material enables an increased machine running speed at the same time as less abrasion and thus a lower maintenance requirement. As a result, the material significantly contributes to an increase in your productivity. A member of the S plus family Production based on PE-UHMW SG 1.1

Features/Benefits: Color: Gold Extremely tough, long wearing material Limited heat and chemical resistance Excellent in water and water-based fluids, particularly suitable for abrasive media Recommended for long wear life under severe conditions Working Temperature Range: -268° to +82°C [-450° to +180°F]

This material has the same properties as Muralen® but also has an antimicrobial effect.Production based on PE-UHMW SG 2.1.

OKULEN® 2000 blue FN5893 is a Ultra-High-Molecular-Weight-PolyEthylene (UHMW-PE polymer). By adding of special additives it possesses a low coefficient of friction. The improved low coefficient of friction (non-stick surface) makes this material ideal for gliding applications.

Tekalen® T 3000 R is a regenerated product. Products made from Tekalen® A 6000 and Tekalen® A 9000 are ground and pressed again. Due to the changed production process, the material properties change compared to the usual products.

OKULEN® 500-REG. multi-colored FN9009 (PE-HMW) a high molecular weight low pressure polyethylene with regenerated materials.

"Since the 1950s, Material ""S""® has been tried and tested a thousand times over for a wide range of applications in power engineering and conveyor technology Material ""S""® is based on virgin, ultra- high molecular weight low pressure polyethylene and significantly exceeds the requirements of DI n 16972. Original Material ""S""® is one of the most successful groups of materials in the industrial plastics sector. In particular, Original Material ""S"" green® has established itself as a branded product in the plastics sector. It is used in all applications where a technical, high- performance plastic is required. Original Material ""S"" green® is synonymous with excellent slide properties, high wear resi - stance, and a long lifetime." Production based on PE-UHMW SG 1.2.

OKULEN® 500 UV black FN9100 is a high molecular low pressure polyethylene with a molecular weight of approx. 500.000 g/mol.

PROFILAN Kunststoffwerk PROstat 9000 is the antistatic plastic in white.

OKULEN® 500 blue FN5100 is a high molecular low pressure polyethylene with a molecular weight of approx. 500.000 g/mol. (HMW-PE)

Polimersan Plastics Polipolen UHMW-1000 is Polimersan’s high density polyethyleneedir and has High chemical resistance.

PROFILAN Kunststoffwerk PROslide 9000 EL is also wear-optimized, has extremely good sliding properties, good noise damping and is ideally suited for permanent high stress - a real alternative to materials with MOS 2 .

OKULEN® 1000 ESD black FN9060 is an ultra high molecular low pressure polyethylene (UHMW-PE) with a molecular weight ~ 5.000.000 g/mol.