Products in Basic Thermoplastics: Fibers Extrusion

Braskem D130C is a high bulk polypropylene homopolymer (HPP). Applications and suggested uses include fine denier staple fiber and high speed fiber spinning.

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

Braskem D180M polypropylene homopolymer (HPP) offers low gas fade. Applications and suggested uses include BCF multi-filaments, high tenacity continuous filament yarn, and fine denier staple fibers.

Braskem CP250H polypropylene homopolymer (HPP) offers narrow MWD and low smoke and condensate. Applications and sugested users include spunbond nonwovens, high-speed fiber spinning continuous filament yarns and stable fiber.

Braskem CP360H polypropylene homopolymer is a high melt flow rate homopolymer designed for spunbond nonwoven production. This resin features an excellent processability allowing increased line speed or air pressure as well as gains of mechanical properties. The narrow molecular weight distribution AGF stability and tight gel control provide its unique performance.

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

Braskem H521 is a polypropylene homopolymer designed for injection molding and general applications. It provides low water carryover. Other applications and suggested uses include tape, slit-film fibers, containers, closures and housewares.

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

Braskem D115A polypropylene homopolymer is a multi purpose HPP offering excellent color and processing stability. Applications and suggested uses include housewares, patio furniture, closures and process with UL Approved (USA and Canada).

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

SHA7260 is a high-density polyethylene specifically designed for injection molding, offering ease of processing and high productivity. This resin exhibits a good melt flow, providing high rigidity and hardness to the molded products. Its narrow molar mass distribution reduces the tendency to warpage. The minimum biobased carbon content of this grade is 94%, determined according to ASTM D6866.

For more information regarding REACH, please visit Braskem's site

SHE150 resin is a High Density Polyethylene (HDPE) specifically designed for the monofilament extrusion process. It offers a well-balanced combination of processability, spinnability, and knotting strength, while maintaining minimal gels. Additionally, it contains processing aid and oxidant additives. This grade has a minimum biobased carbon content of 94%, as determined by ASTM D6866. The resin can also be blended with LLDPE to enhance the stiffness of blown films.

For more information regarding REACH, please visit Braskem's site

Braskem D080T general purpose polypropylene homopolymer (HPP) is designed for applications including BCF, fiber extrusion, and staple fibers.

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

Braskem D036W6 is a general purpose polypropylene homopolymer (HPP) for injection molding. If offers low water carryover.

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

Braskem D180A2 polypropylene homopolymer (HPP) offers excellent melt stability. Applications include BCF multi-filaments, high tenacity continuous filament yarn, and fine denier staple fibers.

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

11 MELT FLOW HOMOPOLYMER FOR FIBER SPINNING Pinnacle Polymers Polypropylene 1512I is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for fiber spinning and other critical extrusion applications.The 1512I product provides: Excellent color processing stability Superior fiber spinning characteristics Resistance to gas fading Enhanced fiber resiliency Excellent lot-to-lot consistency Pinnacle's polypropylene, as marketed by Pinnacle Polymers, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetics Act of 1938.

35 MELT FLOW HOMOPOLYMER Pinnacle Polymers Polypropylene 1635 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for low denier per filament yarns; extrusion coating applications; and specialty cast embossed films.The 1635 product provides: Excellent color and processing stability Superior fiber spinning characteristics Resistance to gas fading Excellent component for extrusion coating Narrow Molecular Weight Distribution Pinnacle's 1635 polypropylene as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a. May be used in contact with food types I, II, IV-B, VII-B and VIII described in Table 1 of section 176.170(c), under conditions of use B through H described in table 2 of section 176.170(c) and with food types III, IV-A, V, VI, VII-A, and IX described in Table 1 of section 176.170(c) under conditions of use D through H described in table 2 of section 176.170(c).

7.9 MELT FLOW HOMOPOLYMER FOR FIBER SPINNING Pinnacle Polymers Polypropylene 1508 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for fiber spinning and other critical extrusion applications.The 1508 product provides: Excellent color and processing stability Superior fiber spinning characteristics Resistant to gas fading Excellent UV stability Excellent cleanliness Pinnacle's polypropylene, as marketed by Pinnacle Polymers, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.

Gianeco Recycled PLA pellets 2003D-024 is used in extrusion, injection and fiber.

Moplen HP461Y is a new generation polypropylene homopolymer, supplied in pellet form. Its main application is in melt blown non-wovens, with very narrow molecular weight distrbution, typical end use products including diapers, sanitary napkins, oil absorbent mats, wipes, masks, air filtration media, and wet tissues.

Characteristics: Control reologhy high melt flow rate narrow molecular weight distribution Random copolymer polypropylene; lot to lot consistency, with special additives package and high cleanness, to get stable spinning processability in low denier fiber. Recommended for: Non woven soft touch fabrics Spunbond process; melt spinning of low denier fibers where it is necessary this properties; extrusion coating of raffia woven fabrics; injection molding general purpose applications.

PETOPLEN EH251 is a homopolymer polypropylene resin with narrow molecular weight distribution. The material is produced by controlled rheology (CR) technology. It is suitable for high speed injection molding and general purpose fiber extrusion applications.

Trilene HI35HO is an excellent high flow polypropylene homopolymer for thin-walled and multicavity household and fine denier spunbond non wovens fabrics.This grade uses Unipol® polypropylene technology, with latest catalyst technology.

Characteristics: Control reologhy high melt flow rate narrow molecular weight distribution Homopolymer polypropylene, lot to lot consistency, with special additives package and high cleanness, to get stable spinning processability in low denier fiber at high speed, good gas fading resistant. Recommended for: Fabrication of Non woven fabrics by high speed Spunbond process, melt spinning of low denier fibers, extrusion coating of raffia woven fabrics, general purpose injection molding applications.

Moplen HP562T is a Polypropylene homopolymer resin for spunbond fiber

PETOPLEN EH341 is a homopolymer polypropylene resin with narrow molecular weight distribution. The material is produced by controlled rheology (CR) technology. It is suitable for very high speed spunbond fiber production and general purpose injection molding.

Gianeco PLA FILAMENT polylactic acid is used in extrusion, injection, fiber, 3D printing, filament and thermoforming.

20 MELT FLOW HOMOPOLYMER FOR FIBER SPINNING Pinnacle Polymers Polypropylene 1517 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for fiber spinning and other critical extrusion applications.The 1517 product provides: Excellent color and processing stability Superior fiber spinning characteristics Resistance to gas fading Enhanced fiber resiliency Excellent lot-to-lot consistency Pinnacle's 1517 polypropylene as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a. May be used in contact with food types I, II, IV-B, VII-B and VIII described in Table 1 of section 176.170(c), under conditions of use B through H described in table 2 of section 176.170(c) and with food types III, IV-A, V, VI, VII-A, and IX described in Table 1 of section 176.170(c) under conditions of use D through H described in table 2 of section 176.170(c).

Moplen HP561R is a Polypropylene homopolymer resin for spunbond fibers

Characteristics: Control reologhy high melt flow rate Homopolymer polypropylene, excellent uniformity in the spinning of low-denier fibers at high speed and easy mold filling, good balance "stiffness/impact" Recommended for: Fabrication of Non woven fabrics by high speed Spunbond process, extrusion and spinning of low denier fibers, extrusion coating of raffia woven fabrics, Injection thin wall articles and short cycle times, general purpose injection molding applications.

Moplen HP563T is a Fast crystallization polypropylene for spunbond

25 MELT FLOW HOMOPOLYMER FOR FIBER SPINNING Pinnacle Polymers Polypropylene 1525 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for fiber spinning and other critical extrusion applications.The 1525 product provides: Excellent color and processing stability Superior fiber spinning characteristics Enhanced fiber resiliency Excellent lot-to-lot consistency Pinnacle's 1525 polypropylene as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a. May be used in contact with food types I, II, IV-B, VII-B and VIII described in Table 1 of section 176.170(c), under conditions of use B through H described in table 2 of section 176.170(c) and with food types III, IV-A, V, VI, VII-A, and IX described in Table 1 of section 176.170(c) under conditions of use D through H described in table 2 of section 176.170(c).

Teldene® H25FBA is used as extrusion of fibers bulk continuous filaments (BCF) and continuous filaments (CF) such as carpet and upholstery. Also, staple fiber and non-woven.

Moplen HP553R is a High flow polypropylene homopolymer resin

Characteristics: Control reologhy high melt flow rate narrow molecular weight distribution Homopolymer polypropylene, lot to lot consistency, with special additives package and high cleanness, to get stable spinning processability in low denier fiber at high speed, good gas fading resistant. Recommended for: Fabrication of Non woven fabrics by high speed Spunbond process, melt spinning of low denier fibers, extrusion coating of raffia woven fabrics, general purpose injection molding applications.

Moplen HP552R is the polypropylene homopolymer manufactured by PMC under the license of Lyondellbasell using the Spheripol process. Moplen HP552R is a homopolymer typically used by customers in high speed production of staple fiber. Moplen HP552R resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.