Products in Polyolefins: Extrusion Coating

SBC818 is a low-density polyethylene specially formulated for coating processes. This grade exhibits excellent optical properties, minimal neck-in during processing, film stability, and strong adhesion on porous substrates. It does not contain any additives. Moreover, it has a minimum carbon biobased content of 95%, as determined by ASTM D6866.

For more information regarding REACH, please visit Braskem's site

SBC818R50 is a low-density polyethylene specifically designed for coating processes. This grade showcases exceptional optical properties, low neck-in, film stability, and strong adhesion on porous substrates. It is free from additives. Notably, it possesses a minimum carbon biobased content of 50%, as determined by ASTM D6866.

For more information regarding REACH, please visit Braskem's site

EXTINITY® 0201-312 is a highly loaded antimony trioxide concentrate that can be used for a variety of applications including film, sheet, and extrusion coating. The content of antimony trioxide in EXTINITY® 0201-312 is 80%, by weight. Use of EXTINITY® 0201-312 eliminates the exposure hazards typically associated with handling antimony trioxide powder, since all of the antimony trioxide powder is dispersed, distributed and encapsulated in a LDPE carrier resin.

L-270A is the polypropylene Copolymer manufactured by under the Spheripol process. This grade is designed to potential end use applications include Extrusion coating on Woven and Kraft paper. Low neck-in, High speed process ability, Good adhesive property to paper and Kraft paper, Oil & moisture permeation resistance.

Lumitac® Lumitac® is an Ultra Low Density Polyethylene material. It is available in Asia Pacific, Europe, or North America for blow molding, blown film, extrusion coating, injection molding, or laminating. Primary attribute of Lumitac® Lumitac®: Good Processability.Typical applications include: Bags/Liners Film Household Applications Packaging

Hanwha Solutions LDPE 950 is manufactured by autoclave process and designed for variety of extrusion coating application such as aseptic paper can, flexible packaging, paper coating etc. LDPE 950 is well known for its good draw-down characteristics and high quality assurance. This product complies with U.S. FDA regulation 21 CFR 177.1520 (c) 2.1.

Characteristics: Control reologhy high melt flow rate narrow molecular weight distribution Homopolymer polypropylene, lot to lot consistency, with special additives package and high cleanness, to get stable spinning processability in low denier fiber at high speed, good gas fading resistant. Recommended for: Fabrication of Non woven fabrics by high speed Spunbond process, melt spinning of low denier fibers, extrusion coating of raffia woven fabrics, general purpose injection molding applications.

Hanwha Solutions LDPE 963 is manufactured by autoclave process and designed for variety of extrusion coating application such as paper and Tarpaulin coating etc. LDPE 963 is well known for its excellent processability and high quality assurance. This product complies with U.S. FDA regulation 21 CFR 177.1520 (c) 2.1.

Hanwha Solutions LDPE 961 is manufactured by autoclave process and designed for variety of extrusion coating application such as flexible packaging, paper coating etc. LDPE 961 is well known for its excellent neck-in, draw-down and high quality assurance. This product complies with U.S. FDA regulation 21 CFR 177.1520 (c) 2.1.

Characteristics: Control reologhy high melt flow rate Homopolymer polypropylene, excellent uniformity in the spinning of low-denier fibers at high speed and easy mold filling, good balance "stiffness/impact" Recommended for: Fabrication of Non woven fabrics by high speed Spunbond process, extrusion and spinning of low denier fibers, extrusion coating of raffia woven fabrics, Injection thin wall articles and short cycle times, general purpose injection molding applications.

72307E is a LLDPE produced by the Spherilene Technology 72307E can be used in Extrusion Coating on HDPE Woven Fabric, Aluminum Foil, Jute, Paper & Allied Substrates The precise morphological control achieved during polymerization confers superior processability and improved performance properties not available in conventional LLDPE

Characteristics: Controlled rheology polypropylene homopolymer, medium molecular weight distribution, with high fluidity, with special additives for use on thin coatings at high line speeds to obtain excellent uniformity and adhesion, low neck-in, and thinning (draw-drown) and good properties. Recommended for: Extrusion coating of raffia, paper and other substrates, aluminum and paper laminating.

Lotrene® LA 0710 is a low density polyethylene mainly recommended for the extrusion coating at high speed. It contains no additive.

PETILEN H5-21T is a low density polyethylene resin produced by high pressure tubular process. Having medium average molecular weight, the product is developed for general purpose applications. PETILEN H5-21T contains no additives.

Lotrène® LA 0710 is mainly recommended for the extrusion coating at high speed. It contains no additive.

Yparex® 9207 is a family of maleic-anhydride-(MAH)-functionalised polyolefins. For each of its many application areas Yparex® has suitable grades. The grades are characterized by density and melt flow index, melting temperature and the level of functional groups. Functionality for the varying application range is also obtained by using a large array of different base polymers and production technologies. The materials are produced under the highest quality standards allowing no residual unbonded maleic anhydride in the final product.

Nipolon® Nipolon® is a Low Density Polyethylene material. It is available in Asia Pacific, Europe, or North America for blow molding, blown film, extrusion coating, injection molding, or laminating. Primary attribute of Nipolon® Nipolon®: Good Processability.Typical applications include: Bags/Liners Film Household Applications Packaging

Yparex® 2422 is a family of maleic-anhydride-(MAH)-functionalised polyolefins. For each of its many application areas Yparex® has suitable grades. The grades are characterized by density and melt flow index, melting temperature and the level of functional groups. Functionality for the varying application range is also obtained by using a large array of different base polymers and production technologies. The materials are produced under the highest quality standards allowing no residual unbonded maleic anhydride in the final product.

NGL070LG is a Butene co-monomer based Linear Low Density Polyethylene Resin manufactured by IEPL using "SCLAIRTECH" solution polymerisation process of DU Pont, Canada (Now Nova Chemicals) designed for extrusion coating application. As a copolymer it offers excellent environmental stress crack resistance, tear strength, abrasion resistance, toughness, adhesion and sealing properties in a thin extrusion coating.

OpaLene LL E2507 is a butene co-monomer based linear low density grade produced with the latest Ineos Gas Phase polymerization technology.

Characteristics: Control reologhy high melt flow rate narrow molecular weight distribution Random copolymer polypropylene; lot to lot consistency, with special additives package and high cleanness, to get stable spinning processability in low denier fiber. Recommended for: Non woven soft touch fabrics Spunbond process; melt spinning of low denier fibers where it is necessary this properties; extrusion coating of raffia woven fabrics; injection molding general purpose applications.

35 MELT FLOW HOMOPOLYMER Pinnacle Polymers Polypropylene 1635 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for low denier per filament yarns; extrusion coating applications; and specialty cast embossed films.The 1635 product provides: Excellent color and processing stability Superior fiber spinning characteristics Resistance to gas fading Excellent component for extrusion coating Narrow Molecular Weight Distribution Pinnacle's 1635 polypropylene as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a. May be used in contact with food types I, II, IV-B, VII-B and VIII described in Table 1 of section 176.170(c), under conditions of use B through H described in table 2 of section 176.170(c) and with food types III, IV-A, V, VI, VII-A, and IX described in Table 1 of section 176.170(c) under conditions of use D through H described in table 2 of section 176.170(c).

Characteristics: Control reologhy high melt flow rate narrow molecular weight distribution Homopolymer polypropylene, lot to lot consistency, with special additives package and high cleanness, to get stable spinning processability in low denier fiber at high speed, good gas fading resistant. Recommended for: Fabrication of Non woven fabrics by high speed Spunbond process, melt spinning of low denier fibers, extrusion coating of raffia woven fabrics, general purpose injection molding applications.

Hanwha Solutions LDPE 955 is manufactured by autoclave process and designed for variety of extrusion coating application such as flexible packaging, paper coating etc. LDPE 955 is well known for its excellent neck-in, draw-down and high quality assurance. This product complies with U.S. FDA regulation 21 CFR 177.1520 (c) 2.1.

Yparex® 9207C is a family of maleic-anhydride-(MAH)-functionalised polyolefins. For each of its many application areas Yparex® has suitable grades. The grades are characterized by density and melt flow index, melting temperature and the level of functional groups. Functionality for the varying application range is also obtained by using a large array of different base polymers and production technologies. The materials are produced under the highest quality standards allowing no residual unbonded maleic anhydride in the final product.

POLIMAXX®3375RM is a Random Copolymer Polypropylene for extrusion coating process with high flow characteristic. It is suitable for extrusion coating for woven bag and tarpaulin with good extrusion ability, good adhesive and high speed. It also meets the F.D.A. requirement in the code of federal regulations in 21 CFR 177.1520 for food contact.

BRALEN+ FB 4-31 is a film grade of low density polyethylene with good processability and optical properties. This grade is additives free.

Nipolon® -L Nipolon-L is a Linear Low Density Polyethylene material. It is available in Asia Pacific, Europe, or North America for blow molding, blown film, extrusion coating, injection molding, or laminating. Primary attribute of Nipolon® -L Nipolon®-L: Good Processability.Typical applications include: Bags/Liners Film Household Applications Packaging.

Nipolon® -Z Nipolon-Z is a Linear Low Density Polyethylene material. It is available in Asia Pacific, Europe, or North America for blow molding, blown film, extrusion coating, injection molding, or laminating. Primary attribute of Nipolon® -Z Nipolon®-Z: Good Processability.Typical applications include: Bags/Liners Film Household Applications Packaging.

F135 is a Controlled Rheology Polypropylene Homopolymer produced by Spheripol II Technology F135 combines exceptional processability with high melt flow, narrow molecular weight distribution & gas fading resistance F135 is recommended for spunbond - nonwoven & other extrusion process and is suitable for hygiene products