Products in Engineering & Specialty Polymers: Polytetrafluoroethylen...

AGC Chemicals Americas, Inc. Fluon+™ FC 100 BL5-730 (311100576) is a blue pigmented PTFE product designed for gasket and seal applications. It is supplied in dry powder form and is suitable for use when chemical and thermal resistance of PTFE is required with a blue pigmented appearance.

AGC Chemicals Americas, Inc. Fluon+™ Polycomp 158 (310999302) is a polyphenylene sulfide-filled PTFE compound designed for use in seal applications. This compound is supplied in dry powder form. Polyphenylene sulfide is added to improve the wear properties, compressive strength, and creep resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC444.0 (340444004) is a 40% bronze filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form. These pellets range in size from approximately 350 - 800 microns. Bronze powder is added to PTFE to increase the thermal and electrical conductivity and to improve the wear properties and deformation resistance without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 433.3 (340433300) is a 15% graphitized carbon fiber-filled PTFE product designed for use in seal applications. The compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. The addition of graphitized carbon fibers to PTFE improves the wear properties, compressive strength, hardness, and creep resistance of the polymer without sacrificing its chemical and thermal resistance.

AGC Chemicals Americas, Inc. Fluon+™ FC 135 (310135025) is a 25% carbon-filled PTFE product supplied in dry powder form. It improves wear properties, compressive strength, and creep resistance without sacrificing chemical and thermal resistance of the polymer. It can be processed using compression molding equipment to mold thick-walled parts.

AGC Chemicals Americas, Inc. Fluon® PTFE G355 is a fine agglomerated, free-flowing powder specifically designed for automatic molding, isostatic molding, and general molding techniques. These grades have high bulk density with excellent flow characteristics. Articles molded from Fluon® PTFE G350 and G355 exhibit good mechanical properties and surface finish.

AGC Chemicals Americas, Inc. Fluon+™ FC 433 SPL (340433001) is a 15% soft carbon-filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. Soft carbon is added to PTFE to improve the wear properties, compressive strength, and creep resistance without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 15 PI (310999107) is a 15% polyimide-filled PTFE product supplied in dry powder form. Polyimide is added to PTFE to improve its wear properties and abrasion resistance in non-lubricated applications, without sacrificing the chemical and thermal resistance of the polymer. This compound results in less wear on the mating surface.

AGC Chemicals Americas, Inc. Fluon+™ Polycomp 160 (310160000) is a 10% aromatic polyester filled PTFE product designed for use in billet molding. This compound is supplied in dry powder form. Aromatic polyester resin is added to improve the wear properties, thermal resistance and dimensional stability of PTFE without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon® PTFE G350 is a fine agglomerated, free-flowing powder specifically designed for automatic molding, isostatic molding, and general molding techniques. These grades have high bulk density with excellent flow characteristics. Articles molded from Fluon® PTFE G350 and G355 exhibit good mechanical properties and surface finish.

AGC Chemicals Americas, Inc. Fluon+™ FC 474 SPL (340474062) is a 5% glass and 5% molybdenum disulfide filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form. These pellets range in size from approximately 350 - 800 microns. Glass fibers and molybdenum disulfide are added to PTFE to improve the wear properties, compressive strength, and creep resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 105 Billet (310105580) is a 25% glass-filled, PTFE product designed for use in large billet molding. It is supplied in dry powder form and improves wear properties, compressive strength, and creep resistance of PTFE without sacrificing chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 15 MIN SPL (340454463) is a 15% wollastonite-filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. Wollastonite fibers are added to PTFE to improve its wear properties, abrasion resistance, compressive strength, and creep resistance, without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 485.0 (340485000) is a bronze powder and molybdenum disulfide filled PTFE compound designed for use in seal applications. This compound is supplied in round pelletized form. These pellets range in size from approximately 350 - 800 microns. Bronze powder & molybdenum disulfide are added to PTFE to increase the thermal and electrical conductivity and to improve the wear properties and deformation resistance without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ Polycomp 458 (340999102) is a polyphenylene sulfide-filled PTFE product designed for use in seal applications. This compound is supplied in round, pelletized form, with pellets ranging in size from approximately 350-800 microns. Polyphenylene sulfide is added to improve the wear properties, abrasion resistance, and deformation resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 482 SPL (340482030) is a bronze powder and molybdenum disulfide filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. The addition of bronze powder and molybdenum disulfide improves the thermal and electrical conductivity, as well as the wear properties and deformation resistance of PTFE, without compromising the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 15 MIN (310154464) is a 15% wollastonite-filled PTFE product. This compound is supplied in dry powder form. Wollastonite fibers are added to PTFE to improve its wear properties, abrasion resistance, compressive strength, and creep resistance without sacrificing the chemical and thermal resistance of the polymer. Additionally, wollastonite is an FDA compliant filler.

AGC Chemicals Americas, Inc. Fluon® PTFE G201C is a virgin sintered granular PTFE homopolymer. It is intended for the extrusion premium quality rods up to approximately 25mm diameter and tubes up to approximately 10mm wall thickness. Resin properties keep the insulation thickness to a minimum while tolerating a wider range of temperatures (-180 °C to 260 °C) than other insulators.

AGC Chemicals Americas, Inc. Fluon+™ FC 168 (310168002) is a glass fiber and graphite filled PTFE product. This compound is supplied in dry powder form. Glass fibers and graphite powder are added to improve the wear properties, compressive strength, and deformation resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 50 ST ST (310154081) is a 50% stainless steel filled PTFE product designed for use in high wear and load-bearing applications. This compound is supplied in dry powder form and can be processed using compression molding equipment to mold thick-walled parts. Stainless steel is added to PTFE to improve wear properties and load bearing capability without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon® PTFE CD127E are white, free-flowing powders made by coagulating aqueous dispersions of polytetrafluoroethylene. These grades are high molecular-weight homopolymers with excellent thermal stability. The processes used to make CD127E do not use ammonium salts of perfluorooctanoic acid (PFOA), making them an environmentally friendly option. They have been developed for paste extrusion into tapes, tubes, pipe liners, and coated wires, making them ideal for a wide range of industrial applications.

AGC Chemicals Americas, Inc. Fluon+™ FC 7 PI FF (340461400) is a polyimide-filled PTFE product designed for use in seal applications. It is supplied in round pelletized form, with pellets ranging in size from approximately 350 to 800 microns. Polyimide is added to PTFE to improve its wear properties and abrasion resistance in non-lubricated applications, while maintaining the chemical and thermal resistance of the polymer. This compound results in less wear on the mating surface.

AGC Chemicals Americas, Inc. Fluon+™ FC 108 (310108001) is a 40% glass-filled PTFE product designed for use in gasket and seal applications. It is supplied in dry powder form and improves wear properties, compressive strength, and creep resistance of PTFE without sacrificing chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 500 (340500000) is a PTFE product that is supplied in a round pelletized form with a size range of approximately 350 - 800 microns. It has excellent chemical and thermal resistance properties, making it suitable for various applications. Additionally, it has a high bulk density and flow properties, making it compatible with automatic molding equipment, standard design hoppers, and other bulk feeding equipment.

AGC Chemicals Americas, Inc. Fluon+™ FC 15 PPS 10 C (310999215) is a PTFE product filled with a combination of polyphenylene sulfide and carbon. It is supplied in dry powder form. The addition of polyphenylene sulfide improves the wear properties, abrasion resistance, and deformation resistance of PTFE without sacrificing its chemical and thermal resistance.

AGC Chemicals Americas, Inc. Fluon+™ FC 50 ST ST FF (340454082) is a 50% stainless steel-filled PTFE product. This compound is supplied in round, pelletized form, with pellets ranging in size from approximately 350 to 800 microns. Stainless steel is added to PTFE to improve the wear properties and load-bearing capability without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 433 (340433000) is a 15% carbon-filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. Carbon is added to PTFE to improve the compression strength, hardness, and wear properties of the polymer without sacrificing its chemical and thermal resistance.

AGC Chemicals Americas, Inc. Fluon+™ FC 407 (340407040) is a 35% glass-filled, PTFE product designed for use in seal applications. This compound is supplied in round pelletized form. These pellets range in size from approximately 350 - 800 microns. Glass fibers are added to improve the wear properties, compressive strength, and creep resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ Polycomp 148 (310999295) is a composite material made of PTFE, polyphenylene sulfide, and graphite. It is designed for use in seal applications and is supplied in dry powder form. The addition of polyphenylene sulfide and graphite improves the wear properties, compressive strength, and creep resistance of PTFE while maintaining its chemical and thermal resistance. This material can be processed using compression molding equipment to create thick-walled parts.

AGC Chemicals Americas, Inc. Fluon+™ Polycomp 442 (340999443) is a polyphenylene sulfide and graphite filled PTFE compound designed for use in seal applications. This compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. The polyphenylene sulfide and graphite fillers are added to improve the wear properties, compressive strength, and creep resistance of PTFE without sacrificing its chemical and thermal resistance.

AGC Chemicals Americas, Inc. Fluon+™ FC 482 SPL II (340482045) is a PTFE product filled with a combination of bronze powder and molybdenum disulfide. It is designed for use in seal applications and is supplied in round pelletized form with a size range of 350 - 800 microns. The added fillers increase the thermal and electrical conductivity, as well as improve the wear properties and deformation resistance of the PTFE without compromising its chemical and thermal resistance.

AGC Chemicals Americas, Inc. Fluon+™ FC 111 (311111020) is a 5% molybdenum disulfide-filled PTFE product supplied in dry powder form. It improves wear properties, increases surface hardness, and decreases coefficient of friction without sacrificing chemical and thermal resistance of the polymer. This product can be processed using compression molding equipment to mold thick-walled parts.

AGC Chemicals Americas, Inc. Fluon® PTFE CD086E is a white free-flowing powder made by coagulating an aqueous dispersion of polytetrafluoroethylene. This polymer has a trace quantity of comonomer incorporated in the molecule to modify its crystallinity and the resulting properties. The process of making Fluon® PTFE CD086E does not use ammonium salts of perfluorooctanoic acid (PFOA).

AGC Chemicals Americas, Inc. Fluon+™ FC 201 (310201000) is a 5% glass-filled modified PTFE product that is supplied in dry powder form. The addition of glass fibers improves the wear properties, compressive strength, hardness and creep resistance of PTFE without compromising its chemical and thermal resistance. Modified PTFE has improved creep resistance and weldability compared to regular PTFE, making it suitable for use in gasket and seal applications.

AGC Chemicals Americas, Inc. Fluon+™ Polycomp 185 (310999242) is a PTFE product filled with a combination of polyphenylene sulfide and graphite. It is designed for use in large billet molding and is supplied in dry powder form. The addition of polyphenylene sulfide and graphite improves the wear properties, abrasion resistance, and deformation resistance of PTFE without compromising its chemical and thermal resistance. This product is suitable for use in large-scale manufacturing processes and can be molded into thick-walled parts using compression molding equipment.

AGC Chemicals Americas, Inc. Fluon+™ FC 122 (310-122-010) is a 10% graphite-filled PTFE product designed for use in large billet molding. It is supplied in dry powder form and improves lubricity and wear properties of PTFE, especially against soft metals. It can be processed using compression molding equipment to mold thick-walled parts.