Products in Engineering & Specialty Polymers: Film Extrusion

Nylene Extrusion grade nylon 6 resin suitable for film co-extrusion applications and blown film Excellent melt stability and good melt strength Superior grease resistance, toughness, resistance to abrasion, and does not absorb food odors Meets the requirements of FDA regulation 21CFR 177.1500 for direct food contact

Shenzhen Esun Industrial PLA Bags is translucent / opaque film, good stiffness, tensile, ink printability, multi-color printing, high dyne value on the surface of the film, suitable for paper-plastic lamination. It can be used for compound packaging of food, electronic products and cosmetics. After coating, the appearance is matte, which improves the grades of packaging.

Nylene Med-high viscosity nucleated extrusion grade suitable for cast and blown film Excellent melt stability and good melt strength, faster set-up for increased line speeds Superior grease resistance, toughness, resistance to abrasion, and does not absorb food odors

Bio-Flex® FX 1821 by FKuR is comprised of Polylactic Acid and Copolyester Resin. It is commonly used

Promyde® BF540 LN is a lubricated and nucleated high viscosity copolyamide for the production of soft blown films with a high transparency.

UBE Nylon 1022B is a Polyamide 6 (Nylon 6) product. It can be processed by extrusion or injection molding and is available in North America. Typical application: Fabrics/Fibers.Characteristics include: Flame Rated Chemical Resistant Good Mold Release Heat Resistant Impact Resistant UBE Nylon 1022BMedium viscosity (Injection, Extrusion).

• One of the BioBlend® BC Resins designed for injection molded applications.• Made from annually renewable agricultural resources.• BC 27255 contains 50% NuPlastiQ® CG BioPolymer blended with a high heat, high flow PLA homopolymer.• BC 27255 is 100% biobased.• BioBlend® BC 27255 is supplied in pellet form, fully compounded.

DuraPET™ 1200 is a modified PET material that demonstrates extreme impact and wear characteristics. It is a highly durable material that can withstand outdoor environmental conditions. It exhibits ductile failure as low as - 40°C and can withstand higher temperatures above 180°C.

• One of the BioBlend® BC Biodegradable/Compostable Resins designed for mulch films.• Made from 50% annually renewable agricultural resources and PBAT.• BioBlend® BC 27150 is supplied in pellet form, fully compounded.

Teijin Limited Panlite® K-1300Y is a Polycarbonate (PC) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for extrusion or injection molding.Important attributes of Panlite® K-1300Y are: Flame Rated Good Mold Release High Viscosity Typical applications include: Film Sheet

Nilit POLYNIL® P230 is an unreiforced Polyamide 66 (Nylon 66) for film casting and blowing.This 4.7 viscosity Polyamide 66 resin is FDA compliant and is NSF-61 certified for contact with potable water.

Promyde® BF38 L is a lubricated high viscosity Polyamide 6 for general extrusion applications and especially for cast and triple bubble fims. Promyde BF38 L combines good gas barrier properties and chemical resistance, good mechanical and optical properties along with high abrasion resistance and good thermoformability.

Promyde® BF940 LN is a lubricated and nucleated high viscosity polyamide specially formulated for the production of films with a high transparency and improved elongation, tear and puncture resistance. Promyde® BF940LN can be processed in cast and blown film extruders. The additives package ensures good surface slip properties on the polyamide film side. Promyde® BF940LN is specially recommended in asymmetric estructures to minimize curling, specific recommendations are available on request.

Compostable® 3010 Polylactic acid. It is DIN Certco certified for industrial compostability at 1.0 mil thick maximum. It is starch-based and gluten-free, made from corn, tapioca and potato starches that primarily come from the American Midwest (versus oil from the Middle East).

Promyde® BF745 is a new experimental copolyamide without additives specially formulated for the production of cast and blown film.

Nylene Higher RV version of 826 which is a special nylon copolymer suitable for both blown and cast film co-extrusion Has a lower melt point and is less crystalline than standard nylon 6 resins In addition to excellent toughness, chemical resistance, transparency, and low oxygen permeability, films exhibit superior deep-drawing characteristics Effective processing is achieved with extruder and die temperatures in the range of 450 - 525°F

Bio-Flex® FX 1823 by FKuR is comprised of Copolyester Resin and Polylactic Acid. It is commonly used

Polyplastics Group Duranex® 500FP is a Polybutylene Terephthalate (PBT) product. It can be processed by extrusion and is available in Asia Pacific, Europe, or North America. Typical application: Film. Primary characteristic: flame rated.

Natur-Tec® BF7002 is a range of fully biodegradable and compostable polymer resin compounds designed for film extrusion and use in flexible plastic applications. It is produced using proprietary technologies and is intended to provide alternatives to conventional plastics. Natur-Tec® resins are engineered for high performance and can be easily processed on conventional manufacturing equipment. Natur-Tec® BF700Z meets the requirements of international standards for compostable plastics such as ASTM D6400 (U.S.), EN 13432, ISO 17088 and AS4736. It is certified 100% compostable by the Biodegradable Products Institute (BPI), TUVAustria, (OK Compost) and Australian Bioplastics Association (ABA). Please refer to the Material Safety Data Sheet and the Processing Guide for specific handling and processing instruction.

Promyde® BF40 L is a lubricated high viscosity Polyamide 6 for general extrusion applications and especially for cast film. Promyde BF40 L combines good gas barrier properties and chemical resistance, good mechanical and optical properties along with high abrasion resistance and good thermoformability.

Panlite® L-1250ZW by Tejin Chemicals is commonly used as Extrusion Resin, Film Resin, Molding Resin and Sheet Resin for a variety of applications. It is available in Pellets form.

Shenzhen Esun Industrial Biodegradable Fla Food Packing Fresh Wrap Cling is a kind of biodegradable film, which is made of bioplastics as the main raw material, and adopt relevant technology to make it. It is completely biodegradable and meets the certification of en13432 and astm d6400 standard.

Bio-Flex® FX 1824 by FKuR is comprised of Copolyester Resin and Polylactic Acid. It is commonly used

UBE NYLON 5034 FDX17 is a high viscosity Polyamide 6/6.6 copolymer containing an anti block agent. The material is especially suitable as outer layer for air-cooled blown film (asymmetric layer structure). Typical applications are for pouches and thermoformed products.

• One of the BioBlend® XP family of high-performance BioPolymers designed for blown film applications.• BioBlend® XP 22250 is a masterbatch that contains 50% NuPlastiQ GP BioPolymer compounded with HDPE.• Made from 50% annually renewable agricultural resources.• Supplied in pellet form.

Bio-Flex® F 1130 by FKuR is comprised of Polylactic Acid and Copolyester Resin. It is commonly used It is available in Granules form.

M∙VERA® B5033 (B0199) is a Biodegradable polyester compound for film extrusion

ETFE LM is used for higher speed extrusion of wire and cable jackets, tubing, or film.

UBE NYLON 5033 FDX57 is a high viscosity, nucleated Polyamide 6/6.6 copolymer. It is most suitable for water-cooled blown film production. Typical application is for sausage casing and shrink bags.

• One of the BioBlend® BC Biodegradable/Compostable Resins designed for mulch films.• Made from 50% annually renewable agricultural resources and PBAT.• BioBlend® BC 27152 is supplied in pellet form, fully compounded.

• One of the BioBlend® BC Biodegradable/Compostable Resins designed for mulch films.• Made from 50% annually renewable agricultural resources and PBAT.• BioBlend® BC 27154 is supplied in pellet form, fully compounded.