Products in Masterbatches: Linear Low Density Polyethylene (LLDPE)

Polyfil Inc’s PAC-0001FFLL-SP is a fluoropolymer-free processing aid concentrate for polyethylene extrusion that offers outstanding performance under a wide variety of extruder conditions. The non-blooming, thermally stable active ingredient can speedily coat internal die surfaces without buildup at low dosage levels. Benefits of PAC-0001FFLL-SP quality include reduction or elimination of melt fracture. Improvements are seen in the gloss, clarity, and physical properties of the film. Economic advantages are obtained through increased extruder output and lower scrap rates. PAC-0001FFLL-SP complies with FDA and EU requirements for food contact applications and will not interfere with ink adhesion, heat seals, or laminations.

Polyfil Inc’s PAC-0005FFLL-MWZ is an economical, fluoropolymer free processing aid concentrate for polyethylene extrusion that offers outstanding performance under a wide variety of extruder conditions. The non-blooming, thermally stable active ingredient can speedily coat internal die surfaces without build-up at moderate dosage levels. Benefits to PAC-0005FFLL-MWZ quality include reduction or elimination of melt fracture, die build-up, and gel formation. Improvements are seen in gloss, clarity, and physical properties of the film. Economic advantages are obtained through increased extruder output and lower scrap rates. PAC-0005FFLL-MWZ complies with FDA requirements for food contact applications and will not interfere with ink adhesion, heat seals, or laminations. The MWZ grade has a proprietary chemistry that is thermally stable at even higher temperatures than the MW, making the MWZ suitable for both blown and cast film applications.

Polyfil Inc’s PAC-0005FFLL-MW is an economical, fluoropolymer free processing aid concentrate for polyethylene extrusion that offers outstanding performance under a wide variety of extruder conditions. The non-blooming, thermally stable active ingredient can speedily coat internal die surfaces without build-up at moderate dosage levels. Benefits to PAC-0005FFLL-MW quality include reduction or elimination of melt fracture, die build-up, and gel formation. Improvements are seen in gloss, clarity, and physical properties of the film. Economic advantages are obtained through increased extruder output and lower scrap rates. PAC-0005FFLL-MW complies with FDA requirements for food contact applications and will not interfere with ink adhesion, heat seals, or laminations. The MW grade has a proprietary chemistry that provides excellent thermal stability for blown film applications.

MBD 40227 is a masterbatch filled with 2.5% fluorated processing aid on a LLDPE support. For SDS, please contact Addiplast Group using the 'Request Document' button.

BindEX E-160 is a maleic anhydride modified linear low density polyethylene adhesive resin. It can be processed within different extrusion and co-extrusion technologies designed to process polyolefins. It is especially designed to combine aluminum sheets with polymer core in Aluminum composite panels, using extrusion coating process.

Rainmaker Polymers ACLLSL05NA2 is 5% Slip PEC having low molecular weight amides bloom to the surface quickly and provide immediate slip characteristics. Ideal for inline converting processes where immediate effectiveness of slip additives is desirable. Slip concentrates utilize low molecular weight chemicals that bloom the the surface of an article providing surface lubrication. This lubrication helps to reduce friction which minimizes film surface to surface tact and is also beneficial in high speed converting equipment.

reCoupp® E-832 is a maleic anhydride modified speciality grade linear low density polyolefin, using advanced anhydride grafting technology. This grade is specifically designed to fulfill the need for rendering multilayer barrier films recyclable into film making again besides molding applications. Appropriate combination of base resin and functional groups in the material provides excellent tie-layer functionality between Nylon 6, Nylon 66, or EVOH, with variety of polyolefin grades used in barrier films for different packaging applications.

Rainmaker Polymers ACLLPA03NA1 is 3% Processing Aid PEC. Processing aids help improve manufacturing thru-put and reduce surface imperfections in polyethylene films. The active processing aid component has an affinity for the metal surfaces and will migrate from the polymer to the extruder barrel and die surfaces. Once at these surfaces, a fine coating is formed that reduces the coefficient of friction between the metal and polymer. The ultimate effect is an improvment in production rates and a reduction in drag induced imperfections such as melt fracture.

Rainmaker Polymers ACLLUV10NA2 is UV PE Concentrate. These are chemicals that absorb UV energy more readily than the base polymer and dissipate this energy as heat. Absorbers are more effective in products with thick cross sections. Most common UV absorbers are based upon benzophenone chemistry.

BindEX E-165 is a modified linear low density polyethylene adhesive resin designed for use in adhesive film for making Aluminum Composite Panels (ACP). The chemical modification provides excellent adhesion to both polyethylene and aluminum substrates. It is preferably used as outer layer in 3- layer coextruded blown film structure. It is this layer which faces aluminum sheet during lamination process. It can be processed on normal extruders used for processing of polyethylenes.

EverGlide® MB350 is a Linear Low Density Polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Rainmaker Polymers ACLLUV10NA1 is UV PE Concentrate. Inhibitors will chemically react and disrupt the early stages of polymer degradation. These are very effective in thin articles such as film and sheet. Most common inhibitors are based upon hindered amine chemistry.

Rainmaker Polymers ACLLAB50NA1 is 50% DE Antiblock PEC. Antiblock concentrates incorporate inorganic components that microscopically "roughen" the surface of blown and cast films. These roughened surfaces minimize the surface contact area between the films and decrease the tendency of these surfaces to adhere to one another.

Rainmaker Polymers CCLLOT70WH1 is White PEC. These concentrates are manufactured with the highest degree of quality awareness to assure industry leading performance.

OPTIM® E-119 is a maleic anhydride modified linear low density polyethylene. It is used to improve adhesion of HFFR fillers such as Magnesium Hydroxide [Mg(OH)2] & Alumina Trihydrate (ATH) and the polymer matrix.

Rainmaker Polymers ACLLCC80NA1 is 80% Calcium Polyethylene. Antiblock concentrates incorporate inorganic components that microscopically "roughen" the surface of blown and cast films. These roughened surfaces minimize the surface contact area between the films and decrease the tendency of these surfaces to adhere to one another.

Rainmaker Polymers ACLLPA02NA2 is 2% Processing Aid PEC. Processing aids help improve manufacturing thru-put and reduce surface imperfections in polyethylene films. The active processing aid component has an affinity for the metal surfaces and will migrate from the polymer to the extruder barrel and die surfaces. Once at these surfaces, a fine coating is formed that reduces the coefficient of friction between the metal and polymer. The ultimate effect is an improvement in production rates and a reduction in drag induced imperfections such as melt fracture.

Rainmaker Polymers CCLLCB50BK1 is Black PEC. Rainmaker Polymers black concentrates are formulated with narrow particle size carbon black to assure excellent dispersion and consistency.

Rainmaker Polymers CCLLTI80WH1 is White PEC. These concentrates are manufactured with the highest degree of quality awareness to assure industry leading performance.

Rainmaker Polymers ACLLAS05NA1 is Antistat PEC. Rainmaker Polymers' Antistat Concentrates dissipate surface charges and eliminate the undesirable effects of static build up. It is a Chemical agent that bloom to the polymer's surface where they react with atmospheric moisture resulting in a microscopic layer of water on the surface that will dissipate the static charge.

OPTIM® E-126 is a maleic anhydride modified linear low density polyethylene. It is used for toughening of Polyamides such as Nylon-6 & Nylon 6, 6.

Rainmaker Polymers ACLLPA03NA3 is 3% Processing Aid PEC. Processing aids help improve manufacturing thru-put and reduce surface imperfections in polyethylene films. The active processing aid component has an affinity for the metal surfaces and will migrate from the polymer to the extruder barrel and die surfaces. Once at these surfaces, a fine coating is formed that reduces the coefficient of friction between the metal and polymer. The ultimate effect is an improvement in production rates and a reduction in drag induced imperfections such as melt fracture.

Rainmaker Polymers ACLLAB20NA1 is 20% DE Antiblock PEC. Antiblock concentrates incorporate inorganic components that microscopically "roughen" the surface of blown and cast films. These roughened surfaces minimize the surface contact area between the films and decrease the tendency of these surfaces to adhere to one another.

Rainmaker Polymers CCLLTI50WH1 is White PEC. These concentrates are manufactured with the highest degree of quality awareness to assure industry leading performance.

Rainmaker Polymers CCLLCB35BK1 is FDA Black PEC. Rainmaker Polymers black concentrates are formulated with narrow particle size carbon black to assure excellent dispersion and consistency.

OPTIM® E-118 is a maleic anhydride modified linear low-density polyethylene. It has been designed to promote adhesion between carrier polymer and high loading of mineral fillers in HFFR cable compounds. Without this coupling agent, it is not possible to achieve the required mechanical properties in the cable compound.

Rainmaker Polymers ACLLAS10NA2 is an Antistat PEC. Rainmaker Polymers' Antistat Concentrates dissipate surface charges and eliminate the undesirable effects of static build up.

Rainmaker Polymers CCLLTI70WH1 is White PEC. These concentrates are manufactured with the highest degree of quality awareness to assure industry leading performance.

Polyfill Technologies Black Masterbatch is based on LDPE. It contains Blends of Antioxidants and UV Stabilizer Aids dispersed in the Polymer Matrix to give excellent performance in environmental condition. It is One Pack System which when mixed with polymer meets the desired properties.

Polyfill Technologies Yellow Masterbatch Loaded Stabilized Masterbatch based on LLDPE. It contains Blends of Antioxidants and Lubricants Aids dispersed in the Polymer Matrix to give excellent performance in environmental condition. It is One Pack System which when mixed with polymer meets the desired properties.

Black 6050 is a LDPE based masterbatch containing high purity carbon black. It is designed for use in films that require excellent surface performance and high jetness, and in ultra thin agricultural films that needs high opacity.

Polyfill Technologies UV Masterbatch PT-UV20 is an LL based masterbatch giving very good protection to PP & LLDPE. PT-UV20 is especially recommended for the applications with thin products such as films and tapes. The active ingredient consists of a combination of different HALS (Hindered Amine Light Stabilizer) additives, which gives the most effective light stabilization effect already at low dosages.

Polyten AP73027 is a fast bloom slip / high clarity antiblcok used in film applications.

AL1142A is Highly viscosity polydimethilsiloxane process aids for compound of mineral flame retardant filler. Improve surface quality, reduce viscosity, remove of die-built-up, reduce mineral filler stick to the metal of extruder, increase fillers dispersion and output stability.

Astra Polymers Color-MB/Beige is used under automotive, consumers, packaging, electrical, appliances, construction, agriculture.

MD PE-800FR is a Flame Retardant Additive product. It is available in North America. MD PE-800FR is compatible with Polyethylene or ethylene-olefin copolymer (PE).