Products in Masterbatches: Foaming Agent

SABIC's Specialties Business LNP™ COLORCOMP™ Compound WQ117945 is a PET based masterbatch for foaming applications containing a nanostructured, non-mineral based additive. Typical usage levels in final foam formulations are below 5%.

KAFRIT FM 09570 LD is an endothermic foaming agent. This product is used to eliminate sink marks and voids and reduce density in polyethylene (PE) and resin-based materials. Its features include reduced density and reduced surface voids. It's commonly applied in the printing and packaging market for non-food consumer packaging.

KAFRIT FM 00D41 LD offers a highly concentrated endothermic foaming agent that eliminates sink marks and voids and reduces density in blow molding and injection molding processes. With reduced density and surface voids, it caters to the printing and packaging market for non-food consumer packaging applications.

KAFRIT FM 00957 LD is an endothermic foaming agent. This product is used to reduce density and provide thermal insulation. It's suitable for resin-based materials, including polyethylenes (PE) and polypropylenes (PP). It's commonly used in the printing and packaging market for applications such as food and beverage packaging and industrial and transport packaging.

POLYFIL H1 is a product that functions as a foaming agent. It is compatible with linear low-density polyethylene (LLDPE), high-density polyethylene (HDPE), polystyrenes (PS), polypropylenes (PP), and low-density polyethylene (LDPE). The recommended processing methods are blow molding and injection molding, and the carrier is resin-based, using low-density polyethylene (LDPE). POLYFIL H1 is a high-active product suitable for pe, pp, and ps.

POLYFIL P functions as a foaming agent, generating microcells to reduce weight in fibers and nonwovens. It's a versatile solution suitable for PE, PP, and PS. It's compatible with a range of polymers and resins, including high-density polyethylene (HDPE), polystyrenes (PS), polypropylenes (PP), low-density polyethylene (LDPE), and linear low-density polyethylene (LLDPE). It accommodates processing methods like blow molding and injection molding. The carrier is low-density polyethylene (LDPE) within a resin-based matrix. Notable features include its contribution to lightness.

POLYFIL GT is a foaming agent designed for use with a variety of compatible polymers and resins, including polyethylene terephthalate (PET), high-density polyethylene (HDPE), polylactic acid (PLA), polypropylene (PP), polycarbonates (PC), and acrylonitrile butadiene styrene (ABS). It is carried by high-density polyethylene (HDPE) in a resin-based formulation, making it suitable for various foaming applications in the plastics industry.

POLYFIL H is a foaming agent specifically designed for use with high-density polyethylene (HDPE), polystyrenes (PS), polypropylenes (PP), low-density polyethylene (LDPE), and linear low density polyethylene (LLDPE) as compatible polymers and resins. It is suitable for extrusion processing methods and is carried by low-density polyethylene (LDPE) in a resin-based formulation, making it ideal for various foaming applications in the plastics industry.

POLYFIL GTL-3 is a product that functions as a foaming agent. It is compatible with various polymers and resins, including polyethylene terephthalate (pet), high-density polyethylene (HDPE), polylactic acid (pla), polypropylenes (PP), polycarbonates (PC), and acrylonitrile butadiene styrene (abs). The recommended processing methods are blow molding, injection molding, and extrusion with a resin-based carrier using high-density polyethylene (HDPE).

POLYFIL VM1 is a foaming agent designed for use with high-density polyethylene (HDPE), polystyrenes (PS), and polypropylenes (PP) as compatible polymers and resins. It is carried by ethylene propylene rubber (epm) in a resin-based formulation, making it suitable for various foaming applications in the plastics industry.

POLYFIL L is a microcellular, patented endothermic solution that serves as a foaming agent. It is compatible with linear low-density polyethylene (LLDPE), high-density polyethylene (HDPE), polystyrenes (PS), polypropylenes (PP), and low-density polyethylene (LDPE). The product can be processed using blow molding and injection molding methods, and its carrier is resin-based, using low-density polyethylene (LDPE).

POLYFIL CS is a foaming agent product. It is suitable for use with sheets, pipes, and profiles. The product is compatible with various polymers and resins, including linear low-density polyethylene (LLDPE), high-density polyethylene (HDPE), polystyrenes (PS), polypropylenes (PP), and low-density polyethylene (LDPE). The recommended processing method for POLYFIL CS is injection molding. The carrier used is resin-based, specifically low-density polyethylene (LDPE).

AGC Chemicals Americas, Inc. Fluon+™ High Flow FXM1-9494 Concentrate is a nucleating agent designed for use in the gas injection extrusion process. It contains a well-dispersed nucleating agent that acts as a site for foaming during the gas injection extrusion process. The concentrate is based on Chemours Teflon® FEP (Fluorinated ethylene propylene) and is supplied in cylindrical pellet form, approximately 0.125 inches long by 0.080 inches in diameter.

AGC Chemicals Americas, Inc. Fluon+™ FP-F-FMX1 Concentrate is a nucleating agent designed for use in the gas injection extrusion process. It contains a well-dispersed nucleating agent that acts as a site for foaming during the gas injection extrusion process. The concentrate is based on Chemours Teflon® FEP (Fluorinated ethylene propylene) and is supplied in cylindrical pellet form, approximately 0.125 inches long by 0.080 inches in diameter.

Blowing Agent (Exo) is azodicarbonamide based additive masterbatch containing 15% of the effective substance in carrier resin. It acts as a blowing agent.

Cell.Mix A073 chemical blowing agent is used for injection molding and against shrinking/warpage, starting at about. 210 °C.

Poly Chem Alloy PolyFoam 1003K are additive masterbatch concentrates containing highly specialized chemical blowing agents. This product was specifically created for the production of microcellular foam structures in a variety of thermoplastic materials. PolyFoam products are available containing endothermic blowing agents, exothermic blowing agents, and as a combination of both.

Poly Chem Alloy PolyFoam 4004K are additive masterbatch concentrates containing highly specialized chemical blowing agents. This product was specifically created for the production of microcellular foam structures in a variety of thermoplastic materials. PolyFoam products are available containing endothermic blowing agents, exothermic blowing agents, and as a combination of both.

MASTERFRAN® FM 56002 A is a TPE compund for caps and closures. It is designed specific materials for the cork industry: specifically, closures for wine, spirits and spirits. Our materials are easy to print, colorable, recyclable, phthalate free.

TRACEL® TSE 7142 TP 1102 is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.

Cell.Mix A072/15 is a chemical blowing agent masterbatch used against shrinking/warpage of compact parts.

Poly Chem Alloy PolyFoam 2004CFP are additive masterbatch concentrates containing highly specialized chemical blowing agents. This product was specifically created for the production of microcellular foam structures in a variety of thermoplastic materials. PolyFoam products are available containing endothermic blowing agents, exothermic blowing agents, and as a combination of both.

Cell.Mix A071 is a chemical blowing agent for injection molding and against shrinking/warpage, starting at about. 155 °C

MD SC-305F is a Blowing Agent Additive product. It is available in North America. MD SC-305F is compatible with Polyethylene or ethylene-olefin copolymer (PE).

Plastron foam is endothermic blowing agent applicable for full range for all applications.

Poly Chem Alloy PolyFoam 503K are additive masterbatch concentrates containing highly specialized chemical blowing agents. This product was specifically created for the production of microcellular foam structures in a variety of thermoplastic materials. PolyFoam products are available containing endothermic blowing agents, exothermic blowing agents, and as a combination of both.

TRACEL® TSE 3142 ACK is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.

TRACEL® G 5142 SVA is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.

TRACEL® G 5172 SVA is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.

Cell.Mix A039 Grit is a acrylate-copolymer-mixture, containing azodicarbonamide/carbonate-preparation.

Cell.Mix A085 is a 70% chemical blowing agent masterbatch for injection molding and extrusion foaming.

Cell.Mix B037 Grit is a ADC-free acrylate-copolymer-mixture, containing benzoxazine/carbonate-preparation.

TRACEL® TSE 7145 ACR is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.